The building materials covered by the Concise Encyclopedia of Building and Construction Materials are classified in three groups: structural materials, semistructural materials, and auxiliary materials.

Issues for 1955 accompanied by supplement: Construction volume and costs, 1915-1954.

Building Materials and Construction is primarily written for the students of Civil Engineering to make them familiar with building materials and construction practices to build their interest in the field. The book starts with explanation of building material concepts and goes on to explain all the important materials like Lime, Bricks, Cement, Timber, Concrete etc. in separate chapters following the same flow as prescribed in major universities. Special emphasis is given on construction materials such as foundation work, stone and brick masonry, plastering work, door and window design, roof and floors, DPC etc.

This publication establishes a basic understanding of materials used in civil engineering construction as taught in tertiary institutions across South Africa. It uses the objectives of the NQF in promoting independent learning and is the only book pertaining to Civil Engineering that covers all the necessary topics under one roof.

Building Construction Materials and Techniques follows a unique approach to the subject by including both materials and construction techniques in a combined text as per the latest trends in university curriculums. It also caters to the needs of the universities where these subjects are offered across two semesters as well. Of the 32 chapters in this book,13 are dedicated to building construction materials while the remaining 19 focus on conventional as well as modern techniques in construction. The chapters are supplemented by a plethora of self-explanatory illustrations for easy comprehension. Relevant references to IS codes and standards make this text ideal for extended learning.

Building Seismic Monitoring and Detection Technology focuses on the research of seismic resistance and monitoring technology. The book gathers cutting-edge research and achievements, and includes contributions on the following subjects: New concepts and key technologies of structural regulation and disaster prevention Test and monitoring study of thermal insulation in tunnels Protection of steel and concrete structures using arc thermal spray Research progress of mechanical metamaterials This book is aiming at scholars and engineers involved or interested in structural engineering and seismic detection technology.

How were huge stones moved from quarries to the sites of Egyptian pyramids? How did the cathedral builders of the Middle Ages lift blocks to great heights by muscle power alone? In this intriguing book John Fitchen explains and illustrates the solutions to these and many other puzzles in preindustrial building construction. This is the first general survey of the practices and role of the builder (as opposed to the designer) in constructing an array of structures. Fitchen's approach gives a valuable hands-on feel for what it's like to work with ropes and ladders, wedges and slings; with crews engaged in well digging, bridge building, and the transporting of obelisks hundreds of miles by water and over land. The buildings discussed range from the tents, tepees, and igloos of nomadic tribes to the monumental pyramids of Egypt, the temples of Greece, the aqueducts of Rome, and the cathedrals of medieval Europe.

The book focuses on low carbon construction materials such as stabilised compressed earth blocks (CEB’s) and rammed earth (RE). The content has been divided into four broad themes which includes an introduction to earth construction & stabilised earth, stabilised compressed earth blocks and masonry, stabilised rammed earth, and energy, carbon emissions, sustainability and case studies. It provides basic introduction to earthen materials and earthen structures, particularly with reference to the contemporary work on stabilised earth products for structural applications in buildings. The illustrations in the form of graphs, tables and photographs help the reader to get a grip over the CEB and RE construction. The book illustrates many case studies and examples of CEB and RE buildings. The knowledge on structural characteristics of CEB and RE especially with reference to the durability of such earthen products, and the structural design aspects is uniquely dealt. The embodied energy, embodied carbon, and the impact on construction sector touching upon sustainability of buildings is another unique feature of the book. This volume will be a useful guide for the research community, teachers, engineers, architects, building professionals, practicing engineers, students and individuals aspiring to build low carbon and sustainable buildings.