Masonry walls constitute the interface between the building's interior and the outdoor environment. Masonry walls are traditionally composed of fired-clay bricks (solid or perforated) or blocks (concrete or earth-based), but in the past (and even in the present) they were often associated as needing an extra special thermal and acoustical insulation layer. However, over more recent years investigations on thermal and acoustical features has led to the development of new improved bricks and blocks that no longer need these insulation layers. Traditional masonry units (fired-clay bricks, concrete or earth-based blocks) that don't offer improved performance in terms of thermal and acoustical insulation are a symbol of a low-technology past, that are far removed from the demands of sustainable construction.This book provides an up-to-date state-of-the-art review on the eco-efficiency of masonry units, particular emphasis is placed on the design, properties, performance, durability and LCA of these materials. Since masonry units are also an excellent way to reuse bulk industrial waste the book will be important in the context of the Revised Waste Framework Directive 2008/98/EC which states that the minimum reuse and recycling targets for construction and demolition waste (CDW) should be at least 70% by 2020. On the 9th of March 2011 the European Union approved the Regulation (EU) 305/2011, known as the Construction Products Regulation (CPR) and it will be enforced after the 1st of July 2013. The future commercialization of construction materials in Europe makes their environmental assessment mandatory meaning that more information related to the environmental performance of building materials is much needed. - Provides an authoritative guide to the eco-efficiency of masonry units - Examines the reuse of waste materials - Covers a range of materials including, clay, cement, earth and pumice

Brick and Block Masonry - Trends, Innovations and Challenges contains the lectures and regular papers presented at the 16th International Brick and Block Masonry Conference (Padova, Italy, 26-30 June 2016). The contributions cover major topics: - Analysis of masonry structures - Bond of composites to masonry - Building physics and durability - Case studies - Codes and standards - Conservation of historic buildings - Earthen constructions - Eco-materials and sustainability - Fire resistance, blasts, and impacts - Masonry bridges, arches and vaults - Masonry infill walls and RC frames - Masonry materials and testing - Masonry repair and strengthening - New construction techniques and technologies - Reinforced and confined masonry - Seismic performance and vulnerability assessment In an ever-changing world, in which innovations are rapidly implemented but soon surpassed, the challenge for masonry, the oldest and most traditional building material, is that it can address the increasingly pressing requirements of quality of living, safety, and sustainability. This abstracts volume and full paper USB device, focusing on challenges, innovations, trends and ideas related to masonry, in both research and building practice, will proof to be a valuable source of information for researchers and practitioners, masonry industries and building management authorities, construction professionals and educators.

Developments in data acquisition technologies, digital information and analysis, automated construction processes, and advanced materials and products have finally started to move the construction industry - traditionally reluctant to innovation and slow in adopting new technologies - toward a new era. Massive changes are occurring because of the possibilities created by Building information modeling, Extended reality, Internet of Things, Artificial intelligence and Machine Learning, Big data, Nanotechnology, 3D printing, and other advanced technologies, which are strongly interconnected and are driving the capabilities for much more efficient construction at scale. Construction 4.0: Advanced Technology, Tools and Materials for the Digital Transformation of the Construction Industry provides readers with a state-of-the-art review of the ongoing digital transformation of the sector within the new 4.0 framework, presenting a thorough investigation of the emerging trends, technologies, and strategies in the fields of smart building design, construction, and operation and providing a comprehensive guideline on how to exploit the new possibilities offered by the digital revolution. It will be an essential reference resource for academic researchers, material scientists and civil engineers, undergraduate and graduate students, and other professionals working in the field of smart ecoefficient construction and cutting-edge technologies applied to construction. - Provides an overview of the Construction 4.0 framework to address the global challenges of the buildingsector in the 21st century and an in-depth analysis of the most advanced digital technologies and systems forthe operation and maintenance of infrastructure, real estate, and other built assets - Covers major innovations across the value chain, including building design, fabrication, construction, operationand maintenance, and end-of-life - Illustrates the most advanced digital tools and methods to support the building design activity, includinggenerative design, virtual reality, and digital fabrication - Presents a thorough review of the most advanced construction materials, building methods, and techniquesfor a new connected and automated construction model - Explores the digital transformation for smart energy buildings and their integration with emerging smartgrids and smart cities - Reflects upon major findings and identifies emerging market opportunities for the whole AECO sector

This book presents recent research on sustainable building materials and their various applications. Topics include such items as fiber reinforced concrete, the use of mineral admixtures. self-sensing cement composites, the use of nanomaterials for structural health monitoring and the production of geopolymer mortar. Keywords: Light Transmitting Concrete, Self-Compacting Concrete, Light-Weight Concrete, Polymer Concrete, Porous Concrete, Eco-Friendly Building Material, Cement Composite, Geopolymer Composites, Sustainable Bricks, Cement, Sisal Fiber, Glass Fiber, Nanomaterials, Metakaoline, Fly Ash, Silica Fume, Rice Husk Ash, Oyster Shells, Bitumen, Sugarcane Bagasse Ash, Herbocrete, Waste Foundry Sand, Swell Pressure of Clay, Quarry Dust, Sensors, Topology Optimization, Soil Stabilization.

This book presents select proceedings of the International Conference on Trends and Recent Advances in Civil Engineering (TRACE 2022). It focuses on the latest research developments in structural engineering, structural health monitoring, rehabilitation and retrofitting of structures, geotechnical engineering, and earthquake-resistant structures. The book also covers the latest innovations in building repair and maintenance, AI and blockchain in structural engineering, advancements in the design of earthquake-resistant structures, and sustainable materials for rehabilitation and retrofitting. The contents of this book are useful for researchers and professionals working in structural and geotechnical engineering and allied areas.

Smart Buildings: Advanced Materials and Nanotechnology to Improve Energy Efficiency and Environmental Performance presents a thorough analysis of the latest advancements in construction materials and building design that are applied to maximize building efficiency in both new and existing buildings. After a brief introduction on the issues concerning the design process in the third millennium, Part One examines the differences between Zero Energy, Green, and Smart Buildings, with particular emphasis placed on the issue of smart buildings and smart housing, mainly the 'envelope' and how to make it more adaptive with the new possibilities offered by nanotechnology and smart materials. Part Two focuses on the last generation of solutions for smart thermal insulation. Based on the results of extensive research into more innovative insulation materials, chapters discuss achievements in nanotechnology, bio-ecological, and phase-change materials. The technical characteristics, performance level, and methods of use for each are described in detail, as are the achievements in the field of green walls and their use as a solution for upgrading the energy efficiency and environmental performance of existing buildings. Finally, Part Three reviews current research on smart windows, with the assumption that transparent surfaces represent the most critical element in the energy balance of the building. Chapters provide an extensive review on the technical features of transparent closures that are currently on the market or under development, from so-called dynamic glazing to bio-adaptive and photovoltaic glazing. The aesthetic potential and performance limits are also be discussed. - Presents valuable definitions that are given to explain the characteristics, requirements, and differences between 'zero energy', 'green' and 'smart' buildings - Contains particular focus on the next generation of construction materials and the most advanced products currently entering the market - Lists both the advantages and disadvantages to help the reader choose the most suitable solution - Takes into consideration both design and materials aspects - Promotes the existence of new advanced materials providing technical information to encourage further use and reduce costs compared to more traditional materials

Marine Concrete Structures: Design, Durability and Performance comprehensively examines structures located in, under, or in close proximity to the sea. A major emphasis of the book is on the long-term performance of marine concrete structures that not only represent major infrastructure investment and provision, but are also required to operate with minimal maintenance. Chapters review the design, specification, construction, and operation of marine concrete structures, and examine their performance and durability in the marine environment. A number of case studies of significant marine concrete structures from around the world are included which help to reinforce the principles outlined in earlier chapters and provide useful background to these types of structures. The result is a thorough and up-to-date reference source that engineers, researchers, and postgraduate students in this field will find invaluable. - Covers, in detail, the design, specification, construction, and operation of marine concrete structures - Examines the properties and performance of concrete in the marine environment - Provides case studies on significant marine concrete structures and durability-based design from around the world

Recent Trends in Cold-Formed Steel Construction discusses advancements in an area that has become an important construction material for buildings. The book addresses cutting-edge new technologies and design methods using cold-formed steel as a main structural material, and provides technical guidance on how to design and build sustainable and energy-efficient cold-formed steel buildings. Part One of the book introduces the codes, specifications, and design methods for cold-formed steel structures, while Part Two provides computational analysis of cold-formed steel structures. Part Three examines the structural performance of cold-formed steel buildings and reviews the thermal performance, acoustic performance, fire protection, floor vibrations, and blast resistance of these buildings, with a final section reviewing innovation and sustainability in cold-formed steel construction. - Addresses building sciences issues and provides performance solutions for cold-formed buildings - Provides guidance for using the next generation design method, computational tools, and technologies - Edited by an experienced researcher and educator with significant knowledge on new developments in cold-formed steel construction

Characteristics and Uses of Steel Slag in Building Construction focuses predominantly on the utilization of ferrous slag (blast furnace and steel slag) in building construction. This extensive literature review discusses the worldwide utilization of ferrous slag and applications in all sectors of civil engineering, including structural engineering, road construction, and hydro-technical structures. It presents cutting-edge research on the characteristics and properties of ferrous slag, and its overall impact on the environment. - Comprehensively reviews the literature on the use of blast furnace and steel slag in civil engineering - Examines the environmental impact of slag production and its effect on human health - Presents cutting-edge research from worldwide studies on the use of blast furnace and steel slag

Long-Term Performance and Durability of Masonry Structures: Degradation Mechanisms, Health Monitoring and Service Life Design focuses on the long-term performance of masonry and historical structures. The book covers a wide range of related topics, including degradation mechanisms in different masonry types, structural health monitoring techniques, and long-term performance and service life design approaches. Each chapter reflects recent findings and the state-of-the-art, providing practical guidelines. Key topics covered include the theoretical background, transport properties, testing and modeling, protective measures and standards and codes. The book's focus is on individual construction materials, the composite system and structural performance. - Covers all issues related to durability, including degradation mechanisms, testing and design, monitoring and service life design - Focuses on different masonry construction types - Presents a 'one-stop' reference for advanced postgraduate courses that focuses on the durability of masonry and historical constructions