Thoroughly Updated Coverage of Masonry Codes, Materials, and Structural Design This fully revised resource covers the design of masonry structures using the 2015 International Building Code, the ASCE 7-10 loading standard, and the TMS 402-13 and TMS 602-13 design and construction standards. The book emphasizes the strength design of masonry and includes allowable-stress provisions. The latest advances, materials, and techniques are clearly explained. Chapter-long case studies featuring a low-rise building with reinforced concrete masonry and a four-story building with clay masonry illustrate the topics presented. Masonry Structural Design, Second Edition, covers: • Structural behavior and design of low-rise, bearing wall buildings • Materials used in masonry construction • Code basis for structural design of masonry buildings • Basics of seismic design in masonry buildings • Introduction to MSJC treatment of structural design • Strength design of reinforced and unreinforced masonry elements • Allowable-stress design of reinforced and unreinforced masonry elements • Comparison of design by the allowable-stress approach versus the strength approach • Lateral load analysis of shear wall structure • Design and detailing of floor and roof diaphragms • Structural design of AAC masonry

This third edition of a popular textbook is a concise single-volume introduction to the design of structural elements in concrete, steel, timber, masonry, and composites. It provides design principles and guidance in line with both British Standards and Eurocodes, current as of late 2007. Topics discussed include the philosophy of design, basic structural concepts, and material properties. After an introduction and overview of structural design, the book is conveniently divided into sections based on British Standards and Eurocodes.

Written for the practicing architect, Structural Design addresses the process on both a conceptual and a mathematical level. Most importantly, it helps architects work with structural consultants and understand all the necessary considerations when designing structural systems. Using a minimum of simple math, this book shows you how to make correct design calculations for structures made from steel, wood, concrete, and masonry. What?s more, this edition has been completely updated to reflect the latest design methods and codes, including LRFD for steel design. The book was also re-designed for easy navigation. Essential principles, as well as structural solutions, are visually reinforced with hundreds of drawings, photographs, and other illustrations--making this book truly architect-friendly.

Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection highlights bridge engineering specimens from around the world, contains detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject. Published in five books: Fundamentals, Superstructure Design, Substructure Design, Seismic Design, and Construction and Maintenance, this new edition provides numerous worked-out examples that give readers step-by-step design procedures, includes contributions by leading experts from around the world in their respective areas of bridge engineering, contains 26 completely new chapters, and updates most other chapters. It offers design concepts, specifications, and practice, as well as the various types of bridges. The text includes over 2,500 tables, charts, illustrations and photos. The book covers new, innovative and traditional methods and practices; explores rehabilitation, retrofit, and maintenance; and examines seismic design and building materials. The third book, Substructure Design, contains 11 chapters addressing the various substructure components. What’s New in the Second Edition: • Includes new chapter: Landslide Risk Assessment and Mitigation • Rewrites the Shallow Foundation chapter • Rewrites the Geotechnical Consideration chapter and retitles it as: Ground Investigation • Updates the Abutments and Retaining Structures chapter and divides it into two chapters: Abutments and Earth Retaining Structures This text is an ideal reference for practicing bridge engineers and consultants (design, construction, maintenance), and can also be used as a reference for students in bridge engineering courses.

This book focuses on the seismic design of building structures and their foundations to Eurocode 8. It covers the principles of seismic design in a clear but brief manner and then links these concepts to the provisions of Eurocode 8. It addresses the fundamental concepts related to seismic hazard, ground motion models, basic dynamics, seismic analysis, siting considerations, structural layout, and design philosophies, then leads to the specifics of Eurocode 8. Code procedures are applied with the aid of walk-through design examples which, where possible, deal with a common case study in most chapters. As well as an update throughout, this second edition incorporates three new and topical chapters dedicated to specific seismic design aspects of timber buildings and masonry structures, as well as base-isolation and supplemental damping. There is renewed interest in the use of sustainable timber buildings, and masonry structures still represent a popular choice in many areas. Moreover, seismic isolation and supplemental damping can offer low-damage solutions which are being increasingly considered in practice. The book stems primarily from practical short courses on seismic design which have been run over a number of years and through the development Eurocode 8. The contributors to this book are either specialist academics with significant consulting experience in seismic design, or leading practitioners who are actively engaged in large projects in seismic areas. This experience has provided significant insight into important areas in which guidance is required.

Structural Modeling and Experimental Techniques presents a current treatment of structural modeling for applications in design, research, education, and product development. Providing numerous case studies throughout, the book emphasizes modeling the behavior of reinforced and prestressed concrete and masonry structures. Structural Modeling and Experimental Techniques: Concentrates on the modeling of the true inelastic behavior of structures Provides case histories detailing applications of the modeling techniques to real structures Discusses the historical background of model analysis and similitude principles governing the design, testing, and interpretation of models Evaluates the limitations and benefits of elastic models Analyzes materials for reinforced concrete masonry and steel models Assesses the critical nature of scale effects of model testing Describes selected laboratory techniques and loading methods Contains material on errors as well as the accuracy and reliability of physical modeling Examines dynamic similitude and modeling techniques for studying dynamic loading of structures Covers actual applications of structural modeling This book serves students in model analysis and experimental methods, professionals manufacturing and testing structural models, as well as professionals testing large or full-scale structures - since the instrumentation techniques and overall approaches for testing large structures are very similar to those used in small-scale modeling work.

This book is prepared according to the 2011 ACI Code for buildings and AASHTO LRFD Specifications for bridges. The units used throughout the presentation are the SI units according to the official system of units in Pakistan. As in Part-I of the same series of books, it is tried that the three main phases of structural design, namely load determination, design calculations and detailing together are introduced to the beginner. Besides reinforced concrete design, basics of formwork design, plain concrete properties and repair / rehabilitation of concrete structures are also presented. This book is useful with the 1st part of the same book. Suggestions for further improvement of the presentation will be highly appreciated and will be incorporated in the future editions.

The second edition of this popular textbook provides, in a single volume, an introduction to the design of structural elements in concrete, steel, timber and masonry. Part One explains the principles and philosophy of design, basic techniques, and structural concepts. Designing in accordance with British Standard codes of practice follows in Part Two, with numerous diagrams and worked examples. In Part Three the Eurocodes are introduced, and their main differences to British codes are explained. Comprehensively revised and updated to comply with the latest British Standards and Eurocodes, the second edition also features a new section on the use and design of composite materials. With an accompanying solutions manual available online, Design of Structural Elements is the ideal course text for students of civil and structural engineering, on degree, HNC and HND courses.