Following the two damaging California earthquakes in1989 (Loma Prieta) and 1994 (Northridge), many concrete wall and masonry wall buildings were repaired using federal disaster assistance funding. The repairs were based on inconsistent criteria, giving rise to controversy regarding criteria for the repair of cracked concrete and masonry wall buildings. To help resolve this controversy, the Federal Emergency Management Agency (FEMA) initiated a project on evaluation and repair of earthquake-damaged concrete and masonry wall buildings in 1996. The ATC-43 project addresses the investigation and evaluation of earthquake damage and discusses policy issues related to the repair and upgrade of earthquake-damaged buildings. The project deals with buildings whose primary lateral-force-resisting systems consist of concrete or masonry bearing walls with flexible or rigid diaphragms, or whose vertical-load-bearing systems consist of concrete or steel frames with concrete or masonry infill panels. The intended audience is design engineers, building owners, building regulatory officials, and government agencies. The project results are reported in three documents. TheFEMA306report, Evaluation of Earthquake Damaged Concrete and Masonry Wall Buildings, Basic Procedures Manual, provides guidance on evaluating damage and analyzing future performance. Included in the document are component damage classification guides, and test and inspection guides. FEMA 307, Evaluation of Earthquake Damaged Concrete and Masonry Wall Buildings, Technical Resources, contains supplemental information including results from a theoretical analysis of the effects of prior damage on single-degree-of-freedom mathematical models, additional background information on the component guides, and an example of the application of the basic procedures. FEMA 308, The Repair of Earthquake Damaged Concrete and Masonry Wall Buildings ,discusses the policy issues pertaining to the repair of earthquake-damaged buildings and illustrates how the procedures developed for the project can be used to provide a technically sound basis for policy decisions. It also provides guidance for the repair of damaged components.

Following the two damaging California earthquakes in 1989 (Loma Prieta) and 1994 (Northridge), many concrete wall and masonry wall buildings were repaired using federal disaster assistance funding. The repairs were based on inconsistent criteria, giving rise to controversy regarding criteria for the repair of cracked concrete and masonry wall buildings. To help resolve this controversy, the Federal Emergency Management Agency (FEMA) initiated a project on evaluation and repair of earthquake damaged concrete and masonry wall buildings in 1996. The ATC-43 project addresses the investigation and evaluation of earthquake damage and discusses policy issues related to the repair and upgrade of earthquake damaged buildings. The project deals with buildings whose primary lateral-force-resisting systems consist of concrete or masonry bearing walls with flexible or rigid diaphragms, or whose vertical-load-bearing systems consist of concrete or steel frames with concrete or masonry infill panels. The intended audience is design engineers, building owners, building regulatory officials, and government agencies. The project results are reported in three documents. The FEMA 306 report, Evaluation of Earthquake Damaged Concrete and Masonry Wall Buildings, Basic Procedures Manual, provides guidance on evaluating damage and analyzing future performance. Included in the document are component damage classification guides, and test and inspection guides. FEMA 307, Evaluation of Earthquake Damaged Concrete and Masonry Wall Buildings, Technical Resources, contains supplemental information including results from a theoretical analysis of the effects of prior damage on single-degree-of-freedom mathematical models, additional background information on the component guides, and an example of the application of the basic procedures. FEMA 308, The Repair of Earthquake Damaged Concrete and Masonry Wall Buildings, discusses the policy issues pertaining to the repair of earthquake damaged buildings and illustrates how the procedures developed for the project can be used to provide a technically sound basis for policy decisions. It also provides guidance for the repair of damaged components.

The purpose of this document is to present practical guidance for the repair and upgrading of earthquake damaged buildings with primary lateral-force-resisting systems consisting of concrete bearing walls, masonry bearing walls, or infilled frames. The guidance consists of a policy framework for facilitating the determination of the appropriate scope of repair or upgrading measures. This document also includes outlines of specific repair techniques that can address the component damage common to these buildings. The criteria and procedures are based on the evaluation of the anticipated seismic performance of a subject building at three different times: in its condition immediately before the damaging earthquake (pre event), in its damaged condition, and in its repaired or upgraded condition. This document may be used as a technical resource to facilitate the settlement of insurance claims, the development of policy and strategy for repair, or other appropriate purposes. The intended users of the document are design engineers, building owners, building officials, insurance adjusters, and government agencies.

The Rapid Visual Screening (RVS) handbook can be used by trained personnel to identify, inventory, and screen buildings that are potentially seismically vulnerable. The RVS procedure compromises a method and several forms that help users to quickly identify, inventory, and score buildings according to the risk of collapse if hit by major earthquakes. This third edition includes extensive updates including: Update of the Basic Scores and Score Modifiers Update of the ground motion definitions Preparation of additional reference guides Inclusion of additional building types that are prevalent Inclusion of additional considerations, such as nonstructural hazards, existing retrofits, building additions, and adjacency Addition of an optional electronic scoring methodology and more. Related products: Natural & Environmental Disasters resources collection is available here: https://bookstore.gpo.gov/catalog/natural-environmental-disasters Other products produced by the U.S. Department of Homeland Security, Federal Emergency Management Administration (FEMA) are available here: https://bookstore.gpo.gov/agency/federal-emergency-management-agency-fema

"TRB's National Cooperative Highway Research Program (NCHRP) Report 753: A Pre-Event Recovery Planning Guide for Transportation is designed to help transportation owners and operators in their efforts to plan for recovery prior to the occurrence of an event that impacts transportation systems. The guide includes tools and resources to assist in both pre-planning for recovery and implementing recovery after an event. NCHRP Report 753 is intended to provide a single resource for understanding the principles and processes to be used for pre-event recovery planning for transportation infrastructure. In addition to the principles and processes, the guide contains checklists, decision support tools, and resources to help support pre-event recovery planning."--Publisher description.

This multi-contributor book provides comprehensive coverage of earthquake engineering problems, an overview of traditional methods, and the scientific background on recent developments. It discusses computer methods on structural analysis and provides access to the recent design methodologies and serves as a reference for both professionals and res

This text details the proceedings of the 11th European Conference on Earthquake Engineering. CD-ROM contains full text of the 650 papers in printed form. This would have been 6 volumes of 1000 pages each. Topics covered: are: Engineering seismology; Experimental aspects for soils, rocks and construction material; Computational aspects for materials, structures and soil-structure interaction; Civil engineering projects; Active and passive isolation; Industrial facilities, lifelines and equipment; Vulnerability, seismic risk and strengthening; Site effects and spatial variability of seismic motions; Reliability analyses and probabilistic aspects; Design criteria, codees and standards; Eurocode 8 and national applications; Seismic risk in the Mediterranean basin; Post earthquake investigations;

Provides a process for seismic evaluation of existing buildings in any region of seismicity. Buildings are evaluated to either the Life Safety or Immediate Occupancy Performance Level. Provides instruction to the evaluating design professional on how to determine if a building is adequately designed and constructed to resist seismic forces. All aspects of building performances are considered in terms of foundation/geologic, structural, hazard, nonstructural issues. Reflects advancements in technology; incorporates design professional experience; incorporates lessons learned during recent earthquakes; and much more.