After motivating examples, this monograph gives substantial new results on the analysis and control of linear repetitive processes. These include further applications of the abstract model based stability theory which, in particular, shows the critical importance to the dynamics developed of the structure of the initial conditions at the start of each new pass, the development of stability tests and performance bounds in terms of so-called 1D and 2D Lyapunov equations. It presents the development of a major bank of results on the structure and design of control laws, including the case when there is uncertainty in the process model description, together with numerically reliable computational algorithms. Finally, the application of some of these results in the area of iterative learning control is treated --- including experimental results from a chain conveyor system and a gantry robot system.

This book is a revision and extension of my 1995 Sourcebook of Control Systems Engineering. Because of the extensions and other modifications, it has been retitled Handbook of Control Systems Engineering, which it is intended to be for its prime audience: advanced undergraduate students, beginning graduate students, and practising engineers needing an understandable review of the field or recent developments which may prove useful. There are several differences between this edition and the first. • Two new chapters on aspects of nonlinear systems have been incorporated. In the first of these, selected material for nonlinear systems is concentrated on four aspects: showing the value of certain linear controllers, arguing the suitability of algebraic linearization, reviewing the semi-classical methods of harmonic balance, and introducing the nonlinear change of variable technique known as feedback linearization. In the second chapter, the topic of variable structure control, often with sliding mode, is introduced. • Another new chapter introduces discrete event systems, including several approaches to their analysis. • The chapters on robust control and intelligent control have been extensively revised. • Modest revisions and extensions have also been made to other chapters, often to incorporate extensions to nonlinear systems.

Dynamics systems (living organisms, electromechanical and industrial systems, chemical and technological processes, market and ecology, and so forth) can be considered and analyzed using information and systems theories. For example, adaptive human behavior can be studied using automatic feedback control. As an illustrative example, the driver controls a car changing the speed and steer ing wheels using incoming information, such as traffic and road conditions. This book focuses on the most important and manageable topics in applied multivariable control with application to a wide class of electromechanical dynamic systems. A large spectrum of systems, familiar to electrical, mechanical, and aerospace stu dents, engineers, and scholars, are thoroughly studied to build the bridge between theory and practice as well as to illustrate the practical application of control theory through illustrative examples. It is the author's goal to write a book that can be used to teach undergraduate and graduate classes in automatic control and nonlin ear control at electrical, mechanical, and aerospace engineering departments. The book is also addressed to engineers and scholars, and the examples considered allow one to implement the theory in a great variety of industrial systems. The main purpose of this book is to help the reader grasp the nature and significance of multivariable control.

This book presents an authoritative collection of contributions by researchers from 16 different countries (Austria, Chile, Georgia, Germany, Mexico, Norway, P.R. of China, Poland, North Macedonia, Romania, Russia, Spain, Turkey, Ukraine, the United Kingdom and United States) that report on recent developments and new directions in advanced control systems, together with new theoretical findings, industrial applications and case studies on complex engineering systems. This book is dedicated to Professor Vsevolod Mykhailovych Kuntsevich, an Academician of the National Academy of Sciences of Ukraine, and President of the National Committee of the Ukrainian Association on Automatic Control, in recognition of his pioneering works, his great scientific and scholarly achievements, and his years of service to many scientific and professional communities, notably those involved in automation, cybernetics, control, management and, more specifically, the fundamentals and applications of tools and techniques for dealing with uncertain information, robustness, non-linearity, extremal systems, discrete control systems, adaptive control systems and others. Covering essential theories, methods and new challenges in control systems design, the book is not only a timely reference guide but also a source of new ideas and inspirations for graduate students and researchers alike. Its 15 chapters are grouped into four sections: (a) fundamental theoretical issues in complex engineering systems, (b) artificial intelligence and soft computing for control and decision-making systems, (c) advanced control techniques for industrial and collaborative automation, and (d) modern applications for management and information processing in complex systems. All chapters are intended to provide an easy-to-follow introduction to the topics addressed, including the most relevant references. At the same time, they reflect various aspects of the latest research work being conducted around the world and, therefore, provide information on the state of the art.

About the book... The book provides an integrated treatment of continuous-time and discrete-time systems for two courses at postgraduate level, or one course at undergraduate and one course at postgraduate level. It covers mainly two areas of modern control theory, namely; system theory, and multivariable and optimal control. The coverage of the former is quite exhaustive while that of latter is adequate with significant provision of the necessary topics that enables a research student to comprehend various technical papers. The stress is on interdisciplinary nature of the subject. Practical control problems from various engineering disciplines have been drawn to illustrate the potential concepts. Most of the theoretical results have been presented in a manner suitable for digital computer programming along with the necessary algorithms for numerical computations.

Considers the application of modern control engineering on digital computers with a view to improving productivity and product quality, easing supervision of industrial processes and reducing energy consumption and pollution. The topics covered may be divided into two main subject areas: (1) applications of digital control - in the chemical and oil industries, in water turbines, energy and power systems, robotics and manufacturing, cement, metallurgical processes, traffic control, heating and cooling; (2) systems theoretical aspects of digital control - adaptive systems, control aspects, multivariable systems, optimization and reliability, modelling and identification, real-time software and languages, distributed systems and data networks. Contains 84 papers.

Science Education and Information Transfer reviews developments in the areas of science education and information transfer. Topics covered include the use of games in science and technology education, transfer of information using readily available technology, and networking. The concepts of global learning and distance learning are also discussed, along with the use of video techniques and computer technology to transfer information. This volume is comprised of 10 chapters and begins with an overview of the information society, the usability of information, and the efficiency of information transfer. The discussion then turns to the use of games to teach science and technology; the most readily available technology for transferring information from teachers to students; and networking as a means to transfer information. The following chapters explore the concept and practice of global learning in the perspective of dissemination of scientific and technological knowledge in response to human needs; the use of microcomputers in the teaching of science; and some of the features of distance learning. The final chapter is devoted to teaching information technology in the classroom. This monograph will be of interest to planners, practitioners, researchers, and other professionals in the field of science education and information technology.

Computer Aided Design of Multivariable Technological Systems covers the proceedings of the Second International Federation of Automatic Control (IFAC). The book reviews papers that discuss topics about the use of Computer Aided Design (CAD) in designing multivariable system, such as theoretical issues, applications, and implementations. The book tackles several topics relevant to the use of CAD in designing multivariable systems. Topics include quasi-classical approach to multivariable feedback system designs; fuzzy control for multivariable systems; root loci with multiple gain parameters; multivariable frequency domain stability criteria; and computational algorithms for pole assignment in linear multivariable systems. The text will be of great use to professionals whose work involves designing and implementing multivariable systems.