This book summarizes the main results reached using the EC-funded network PivNet 2. It also presents a survey of the state of the art of scientific research using PIV techniques. You get a clear introduction to the basics of these techniques. The authors then guide you through current and possible future applications for flow analysis, including combustion and supersonic flow. Hundreds of illustrations, many in full color, are provided.

The aeronautics industry is presently aiming for faster design cycles and shorter time to market of new aircraft. It is looking at the same time for improved aerodynamic performance, for evident competitive reasons. Advanced, computer based design systems, including fast and reliable numerical flow solvers, have been developed in the last decade including new turbulence models. On the experimental side, measurement techniques in general have also been improved significantly, however the data evaluation process remains still very time consuming, and unsteady effects and turbulence are often not being captured with sufficient accuracy and detail. The development of Particle Image Velocimetry (PIV) has helped to improve the analysis of the flow fields. After investigations in laboratory scale wind tunnels, a joint initiative on PIV research, by the European Aerospace Research Establishments, within GARTEUR have enabled a wide breakthrough of this new technology in Europe. Within the Research Framework Program of the European Union, the joint research project EUROPIV aimed to apply PIV technology to problems of industrial interest.

Particle image velocimetry, or PIV, refers to a class of methods used in experimental fluid mechanics to determine instantaneous fields of the vector velocity by measuring the displacements of numerous fine particles that accurately follow the motion of the fluid. Although the concept of measuring particle displacements is simple in essence, the factors that need to be addressed to design and implement PIV systems that achieve reliable, accurate, and fast measurements and to interpret the results are surprisingly numerous. The aim of this book is to analyze and explain them comprehensively.

The Particle Image Velocimetry (PIV) measurement technique has undergone a strong development in the last 10 years. This book presents the proceedings of an international workshop held in Zaragoza, Spain on March 31st and April 1st, 2003 containing contributions from worldwide leading teams in the development of the PIV method. Most of these papers have been funded by the EC via the European EUROPIV 2 consortium to improve the performances of this measurement technique toward applications in the European Aeronautical industry, including results which are of strong interest for the worldwide community in Fluid Dynamics.

The contents of this volume reflect to a large extent the efforts made by a group of Institutes at the ETH Zürich to develop new techniques for measurements of flows in fluids in the last decade. The motivation came from the study of tr~sport and mixing processes in natural and industrial systems. One of the characteristic properties of turbulence is its high mixing efficiency. The techniques developed are therefore suitable, although not exclusively, for turbulence measurements. They can be subdivided into point-measurements and field-measurements. The aim of the point-measurements developed is to determine the three components of the velocity and all their first derivatives with good temporal resolution and accuracy in turbulent flows. The old and weIl established method of hot-wire anemometry was used for this purpose. One of the main achievements in this context is the construction of miniature multi-wire probes. This technique was introduced to the Institute of Hydromechanics and Water Resources Management of ETH Zürich by Profs. A. Tsinober and E. Kit from Tel-Aviv University. This was made possible by the generous financial support by ETH, for which I would like to express my gratitude on this occasion. In addition, Dr. F.E. Joergensen from DANTEC contributed an example of recent developments in the hardware ofConstant Temperature Anemometry (CTA), for which I am very thankful.

Speckle photography is an advanced experimental technique used for quantitatve determination of density, velocity and temperature fields in gas, liquid, and plasma flows. This book presents the most important equations for the diffraction theory of speckle formation and the statistical properties of speckle fields. It also describes experimental set-ups and the equipment needed to implement these methods. Speckle photography methods for automatic data acquisition and processing are considered and examples for their use are given.

Experimental Aerodynamics provides an up to date study of this key area of aeronautical engineering. The field has undergone significant evolution with the development of 3D techniques, data processing methods, and the conjugation of simultaneous measurements of multiple quantities. Written for undergraduate and graduate students in Aerospace Engineering, the text features chapters by leading experts, with a consistent structure, level, and pedagogical approach. Fundamentals of measurements and recent research developments are introduced, supported by numerous examples, illustrations, and problems. The text will also be of interest to those studying mechanical systems, such as wind turbines.

Presenting the use of photonics techniques for measurement in mechanics, this book provides a state-of-the-art review of this active and rapidly growing field. It serves as an invaluable resource for readers to explore the current status and includes a wealth of information on the essential principles and methods. It provides a substantial background in a concise and simple way to enable physicists and engineers to assess, analyze and implement experimental systems needed to solve their specific measurement problems.

The 2nd International Multidisciplinary Microscopy and Microanalysis Congress & Exhibition (InterM 2014) was held on 16–19 October 2014 in Oludeniz, Fethiye/ Mugla, Turkey. The aim of the congress was to gather scientists from various branches and discuss the latest improvements in the field of microscopy. The focus of the congress has been widened in an "interdisciplinary" manner, so as to allow all scientists working on several related subjects to participate and present their work. These proceedings include 33 peer-reviewed technical papers, submitted by leading academic and research institutions from over 17 countries and representing some of the most cutting-edge research available. The papers were presented at the congress in the following sessions: · Applications of Microscopy in the Physical Sciences · Applications of Microscopy in the Biological Sciences