the book is as per the latest international curriculum on the subject and covers the following chapters in detail Stresses and Strains ; Resilience and Instantaneous Stress ;Loads, Beams, Bending Moment and Shear force ;Moment of Inertia Bending Stresses ; Springs ; Columns ; Torsion ; Practicals

Written by a leading researcher in the field, this revised and updated second edition of a highly successful book provides an authoritative, comprehensive and unified treatment of the mechanics and micromechanisms of fatigue in metals, non-metals and composites. The author discusses the principles of cyclic deformation, crack initiation and crack growth by fatigue, covering both microscopic and continuum aspects. The book begins with discussions of cyclic deformation and fatigue crack initiation in monocrystalline and polycrystalline ductile alloys as well as in brittle and semi-/non-crystalline solids. Total life and damage-tolerant approaches are then introduced in metals, non-metals and composites followed by more advanced topics. The book includes an extensive bibliography and a problem set for each chapter, together with worked-out example problems and case studies. This will be an important reference for anyone studying fracture and fatigue in materials science and engineering, mechanical, civil, nuclear and aerospace engineering, and biomechanics.

Plasticity and Geotechnics is the first attempt to summarize and present in a single volume the major achievements in the field of plasticity theory for geotechnical materials and its applications to geotechnical analysis and design. The book emerges from the author’s belief that there is an urgent need for the geotechnical and solid mechanics community to have a unified presentation of plasticity theory and its application to geotechnical engineering.

In 1978, the European Mechanics Committee and the French Centre National de la Recherche Scientifique agreed to the organization of an Interna tional Colloquium on the "Mechanical Behavior of Anisotropic Solids". The meeting was held at Villard-de-Lans (near Grenoble, France) from 19th to 22 nd June 1979. The Colloquium considered mechanical aspects of the anisotropy of solids, both initial and induced by permanent deformation, anisotropic hardening and damage, oriented fissuration, etc. Topics concerned mathematical, experimental and engineering aspects of the anisotropy of metals, composites, soils and rocks. The aim of the Colloquium was to bring together experimentalists, theoretecians and engineers interested in various features of mechanical anisotropy, in order to permit an interdisciplinary exchange of understanding, experience and methods. A detailed description of the scope, aim and proposed topics is contained in the Preface. The announcement of the Colloquium attracted a large number of sub mitted contributions. Conforming with the principles of Euromech Colloquia and of the Colloques Internationaux du CNRS, the accepted contributions were limited to 50 communications. A general description of the scientific program is to be found in the Preface. Five general lectures gave state-of-the-art reports concerning some areas of the behavior of anisotropic solids; the 50 communications were divided into 12 sessions dealing with specific topics (see "Contents"). In order to facilitate subsequent contact between the reader and the contributors, full addresses are given in the "List of Authors."

The 16th ICSMGE responds to the needs of the engineering and construction community, promoting dialog and exchange between academia and practice in various aspects of soil mechanics and geotechnical engineering. This is reflected in the central theme of the conference 'Geotechnology in Harmony with the Global Environment'. The proceedings of the conference are of great interest for geo-engineers and researchers in soil mechanics and geotechnical engineering. Volume 1 contains 5 plenary session lectures, the Terzaghi Oration, Heritage Lecture, and 3 papers presented in the major project session. Volumes 2, 3, and 4 contain papers with the following topics: Soil mechanics in general; Infrastructure and mobility; Environmental issues of geotechnical engineering; Enhancing natural disaster reduction systems; Professional practice and education. Volume 5 contains the report of practitioner/academic forum, 20 general reports, a summary of the sessions and workshops held during the conference.

In geomechanics, existing design methods are very much dependent upon sophisticated on-site techniques to assess ground conditions. This book describes numerical analysis, computer simulation and modelling that can be used to answer some highly complex questions associated with geomechanics. The contributors, who are all international experts in the field, also give insights into the future directions of these methods. Numerical Analysis and Modelling in Geomechanics will appeal to professional engineers involved in designing and building both onshore and offshore structures, where geomechanical considerations may well be outside the usual codes of practice, and therefore specialist advice is required. Postgraduate researchers, degree students carrying out project work in this area will also find the book an invaluable resource.

While many introductory texts on soil mechanics are available, most are either lacking in their explanations of soil behavior or provide far too much information without cogent organization. More significantly, few of those texts go beyond memorization of equations and numbers to provide a practical understanding of why and how soil mechanics work. Based on the authors’ more than 25 years of teaching soil mechanics to engineering students, Soil Mechanics Fundamentals presents a comprehensive introduction to soil mechanics, with emphasis on the engineering significance of what soil is, how it behaves, and why it behaves that way. Concise, yet thorough, the text is organized incrementally, with earlier sections serving as the foundation for more advanced topics. Explaining the varied behavior of soils through mathematics, physics and chemistry, the text covers: Engineering behavior of clays Unified and AASHTO soil classification systems Compaction techniques, water flow and effective stress Stress increments in soil mass and settlement problems Mohr’s Circle application to soil mechanics and shear strength Lateral earth pressure and bearing capacity theories Each chapter is accompanied by example and practicing problems that encourage readers to apply learned concepts to applications with a full understanding of soil behavior fundamentals. With this text, engineering professionals as well as students can confidently determine logical and innovative solutions to challenging situations.

This book on Hydrodynamics has been written to meet the requirements of graduate students of all Indian Universities. The subject matter of this book has been presented in such a way that it is easily accessible to students. Each chapter of this book has complete theory and large number of solved examples. We have also selected sufficient problems from various universities examination paper.

Strength theory deals with the yield or failure of materials under complex stress state. It is very important in mechanics of materials, strength of structures, and mechanical and civil engineering. Unified strength theory is a series of yield criteria and failure criteria other than a single strength theory. The unified strength theory can be adopted for various kinds of materials, such as metallic materials, geomaterials, polymers etc. It is the solution to the Voigt-Timoshenko Conundrum. Its limit surfaces cover all regions of the convex strength theory from the lower bound to the upper bound. This book gives a clear and brief description about the unified strength theory both in figures and text. Some applications of unified strength theory are also given in this book. This book is suitable for undergraduate students, who are studying the mechanics of materials and engineering mechanics, as well as for graduate students who are interested in this field. Researchers and engineers can also benefit from this book.

The book has all the details required for the complete coverage of either undergraduate level or graduate level course on Computer Aided Design for mechanical engineers, design engineers and civil and architectural engineers. Emphasis has been laid on explaining the concepts and techniques more from the practical and implementation standpoint so that the reader can begin hands-on and to enable the reader to write his own programs and design CAD systems for any mechanical element. Each chapter has a large number of solved and unsolved exercise problems. The book is complemented by several open ended projects, topics as well as partial details of solution, in all the chapters. Close knitting among the geometric modeling, computer aided engineering and applications such as rapid prototyping is a special feature of this book. Spread in two parts containing 11 chapters the book broadly covers: " Background of the CAD systems. " Curve, surface and solid modeling techniques " Rapid prototyping technology. " Fundamental techniques of computer aided engineering " Fundamentals of mechanical systems " Numerical techniques for analysis of mechanical systems " Finite difference method and finite element method.