Volume 1 of 2 Get one step closer to becoming a Florida State Plumbing Contractor with a prep course designed by 1 Exam Prep to help you conquer the required Plumbing Contractors Trade Knowledge exam. Highlighting and tabbing location for each required book, so you can quickly and easily reference your materials during the exam Practice questions Testing taking techniques that are an indispensable part of these open-book exams A Florida Plumbing Contractor is a contractor whose services are unlimited in the plumbing trade and includes contracting business consisting of the execution of contracts requiring the experience, financial means, knowledge, and skill to install, maintain, repair, alter, extend, or, if not prohibited by law, design plumbing. A plumbing contractor may install, maintain, repair, alter, extend, or, if not prohibited by law, design the following without obtaining an additional local regulatory license, certificate, or registration: sanitary drainage or storm drainage facilities, water and sewer plants and substations, venting systems, public or private water supply systems, septic tanks, drainage and supply wells, swimming pool piping, irrigation systems, and solar heating water systems and all appurtenances, apparatus, or equipment used in connection therewith, including boilers and pressure process piping and including the installation of water, natural gas, liquefied petroleum gas and related venting, and storm and sanitary sewer lines. The scope of work of the plumbing contractor also includes the design, if not prohibited by law, and installation, maintenance, repair, alteration, or extension of air-piping, vacuum line piping, oxygen line piping, nitrous oxide piping, and all related medical gas systems; fire line standpipes and fire sprinklers if authorized by law; ink and chemical lines; fuel oil and gasoline piping and tank and pump installation, except bulk storage plants; and pneumatic control piping systems, all in a manner that complies with all plans, specifications, codes, laws, and regulations applicable. The scope of work of the plumbing contractor applies to private property and public property, including any excavation work incidental thereto, and includes the work of the specialty plumbing contractor. Such contractor shall subcontract, with a qualified contractor in the field concerned, all other work incidental to the work but which is specified as being the work of a trade other than that of a plumbing contractor. A plumbing contractor may perform drain cleaning and clearing and install or repair rainwater catchment systems; however, a mandatory licensing requirement is not established for the performance of these specific services. FLORIDA STATE PLUMBING EXAM DATES AND DEADLINES: The plumbing (trade knowledge) examinations are administered in paper and pencil format multiple times per year in Orlando only. To register for the exam visit www.floridaexam.com Exam DateDeadlineExam Location February 27-28, 2023January 29, 2023Osceola Heritage Park, Exhibition Building April 11-12, 2023March 12, 2023Osceola Heritage Park, Exhibition Building June 26-27, 2023May 28, 2023Osceola Heritage Park, Exhibition Building August 15-16, 2023July 16, 2023Osceola Heritage Park, Exhibition Building October 17-18, 2023September 17, 2023Osceola Heritage Park, Exhibition Building December 12-13, 2023November 12, 2023Osceola Heritage Park, Exhibition Building

Get one step closer to becoming a county licensed Irrigation Contractor in Florida with a prep course designed by 1 Exam Prep to help you conquer the required Prov trade examination. Our exam prep course includes: Highlighting and tabbing location for each required book, so you can quickly and easily reference your materials during the exam Hundreds of practice questions help you become familiar with each reference book Testing techniques that are an indispensable part of passing these open-book exams

Get one step closer to becoming a Florida Underground Utility Contractor with a book designed by 1 Exam Prep to help you conquer the required Florida Underground Utility Contractor Trade Knowledge computer based examination. •Test Taking Techniques •Book Overviews •Highlight and Tab Instructions •Hundreds of Test Questions •Math Review •Test Scope & Approved References "Underground utility and excavation contractor" means a contractor whose services are limited to the construction, installation, and repair, on public or private property, whether accomplished through open excavations or through other means, including, but not limited to, directional drilling, auger boring, jacking and boring, trenchless technologies, wet and dry taps, grouting, and slip lining, of main sanitary sewer collection systems, main water distribution systems, storm sewer collection systems, and the continuation of utility lines from the main systems to a point of termination up to and including the meter location for the individual occupancy, sewer collection systems at property line on residential or single-occupancy commercial properties, or on multioccupancy properties at manhole or wye lateral extended to an invert elevation as engineered to accommodate future building sewers, water distribution systems, or storm sewer collection systems at storm sewer structures. However, an underground utility and excavation contractor may install empty underground conduits in rights-of-way, easements, platted rights-of-way in new site development, and sleeves for parking lot crossings no smaller than 2 inches in diameter if each conduit system installed is designed by a licensed professional engineer or an authorized employee of a municipality, county, or public utility and the installation of such conduit does not include installation of any conductor wiring or connection to an energized electrical system. An underground utility and excavation contractor may not install piping that is an integral part of a fire protection system as defined in s. 633.102 beginning at the point where the piping is used exclusively for such system.

At 1 Exam Prep, we have the proven process of passing any open book contractor exam. Our courses make it convenient and easy for EVERY type of student who is attempting to obtain a contractor's license. What our Prov Journeyman Plumber Contractor Online Course Exam Prep includes: Highlighting and tabbing locations for every required book. Hundreds of practice questions. Test-taking techniques and tips

Get one step closer to becoming a Florida State Irrigation contractor with a prep course designed by 1 Exam Prep to help you conquer the required 2023 Florida Irrigation Contractor Trade Knowledge examination. Use the online course structure to tailor your prep to your individual learning style. You’ll have a full year of access to the online course. Highlight & tab locations for all of the references books Practice Exams with hundreds of questions & answers divided by book.

Volume 1 of 2 Get one step closer to becoming a Florida Electrical contractor with a book course designed by 1 Exam Prep to help you conquer the required Florida Electrical Contractor examination. Highlighting and tabbing location for each required book, so you can quickly and easily reference your materials during the exam Practice questions Testing taking techniques that are an indispensable part of these open-book exams SCOPE - APPLIES TO ALL OF THE BELOW: Lighting Maintenance Specialty Electrical Contractor. The scope of certification of a lighting maintenance specialty contractor is limited to the installation, repair, alteration, or replacement of lighting fixtures in or on buildings, signs, billboards, roadways, streets, parking lots and other similar structures. However, the scope of the certification does not include the provision of, or work beyond, the last electrical supplying source, outlet, or disconnecting means. Sign Specialty Electrical Contractor. The scope of certification includes the structural fabrication including concrete foundation, erection, installation, alteration, repair, service and wiring of electrical signs and outline lighting. The scope of certification shall not include the provision of, or any electrical work beyond, the last disconnect mean or terminal points. However, a contractor certified under this section may provide the electrical entrance requirements for metering and main disconnect of remote billboards or signs which are independent of any structure or building and which require no more than twenty-five (25) kilowatts at two hundred fifty (250) volts maximum. Residential Electrical Contractor. The scope of certification includes installation, repair, alteration, addition to, replacement of or design of electrical wiring, fixtures, appliances, apparatus, raceways, conduit, or any part thereof, in a 1, 2, 3, or 4 family residence not exceeding 2 stories in height, and accessory use structures in connection with the residence. The electrical service installed or worked upon is limited to single phase, 400 ampere single service. Limited Energy Systems Specialty. The scope of certification of a limited energy systems specialty contractor includes the installation, repair, fabrication, erection, alteration, addition to, or design of electrical wiring, fixtures, appliances, thermostats, apparatus, raceways, conduit, and fiber optics (transmission of light over stranded glass) or any part thereof not to exceed 98 volts, (RMS). The scope of work of this license does not include installation, repair, fabrication, erection, alteration, addition to, or design of electrical wiring, fixtures, appliances, thermostats, apparatus, raceways, conduit, that are part of an alarm system. The scope of certification is limited to electrical circuits and equipment as set forth in Section 489.505(7), F.S. The scope of certification shall not include work performed by public utilities exempt under the terms of Section 489.503(4), F.S., or exempt due to the regulatory jurisdiction of the Florida Public Service Commission. The scope of work of this license may also be performed by the following certified and registered license categories: Unlimited Electrical Contractor, Alarm System Contractor I, Alarm System Contractor II, and Residential Electrical Contractor. Utility Line Electrical Contractor. The scope of certification of a utility line electrical contractor means a utility contractor whose business includes all types of transmission electrical circuits, distribution electrical circuits, and substation construction done for investor-owned electrical utilities, city municipal electrical utilities, and cooperatives under the rural electric authority between the point of origin and point of delivery

Get one step closer to becoming a Florida Alarm Systems contractor with a prep course designed by 1 Exam Prep to help you conquer the required Florida Alarm Systems Contractor I computer based examination. Course includes: Test taking techniques and tips Highlight and tab locations for the references books Practice questions SCOPE - APPLIES TO ALL OF THE BELOW: Lighting Maintenance Specialty Electrical Contractor. The scope of certification of a lighting maintenance specialty contractor is limited to the installation, repair, alteration, or replacement of lighting fixtures in or on buildings, signs, billboards, roadways, streets, parking lots and other similar structures. However, the scope of the certification does not include the provision of, or work beyond, the last electrical supplying source, outlet, or disconnecting means. Sign Specialty Electrical Contractor. The scope of certification includes the structural fabrication including concrete foundation, erection, installation, alteration, repair, service and wiring of electrical signs and outline lighting. The scope of certification shall not include the provision of, or any electrical work beyond, the last disconnect mean or terminal points. However, a contractor certified under this section may provide the electrical entrance requirements for metering and main disconnect of remote billboards or signs which are independent of any structure or building and which require no more than twenty-five (25) kilowatts at two hundred fifty (250) volts maximum. Residential Electrical Contractor. The scope of certification includes installation, repair, alteration, addition to, replacement of or design of electrical wiring, fixtures, appliances, apparatus, raceways, conduit, or any part thereof, in a 1, 2, 3, or 4 family residence not exceeding 2 stories in height, and accessory use structures in connection with the residence. The electrical service installed or worked upon is limited to single phase, 400 ampere single service. Limited Energy Systems Specialty. The scope of certification of a limited energy systems specialty contractor includes the installation, repair, fabrication, erection, alteration, addition to, or design of electrical wiring, fixtures, appliances, thermostats, apparatus, raceways, conduit, and fiber optics (transmission of light over stranded glass) or any part thereof not to exceed 98 volts, (RMS). The scope of work of this license does not include installation, repair, fabrication, erection, alteration, addition to, or design of electrical wiring, fixtures, appliances, thermostats, apparatus, raceways, conduit, that are part of an alarm system. The scope of certification is limited to electrical circuits and equipment as set forth in Section 489.505(7), F.S. The scope of certification shall not include work performed by public utilities exempt under the terms of Section 489.503(4), F.S., or exempt due to the regulatory jurisdiction of the Florida Public Service Commission. The scope of work of this license may also be performed by the following certified and registered license categories: Unlimited Electrical Contractor, Alarm System Contractor I, Alarm System Contractor II, and Residential Electrical Contractor. Utility Line Electrical Contractor. The scope of certification of a utility line electrical contractor means a utility contractor whose business includes all types of transmission electrical circuits, distribution electrical circuits, and substation construction is done for investor-owned electrical utilities, city municipal electrical utilities, and cooperatives under the rural electric authority between the point of origin and point of delivery.

Get one step closer to becoming a Florida Air B Contractor with a prep course designed by 1 Exam Prep to help you conquer the required Air B Contractors Trade Knowledge examination. Course includes: Highlighting and tabbing location for each required book, so you can quickly and easily reference your materials during the exam Practice questions Testing taking techniques that are an indispensable part of these open-book exams Covered topics include topics with the requirements of services limited to 25 tons of cooling and 500,000 BTU of heating in any one system in the execution of contracts requiring the experience, knowledge, skill to install, maintain, repair, fabricate, alter, extend, or design central air-conditioning, refrigeration, heating, and ventilating systems, including duct work in connection with a complete system. Florida Air B Contractors Trade Knowledge - Online Exam Prep Course prepared by 1 Exam Prep. We have the proven process of passing any open book contractor exam. With our Blended Format, we mix online basic instruction with face-to-face instruction to obtain the perfect mix for EVERY type of student who is attempting to obtain a contractors license. Florida Class B Air-Conditioning Contractor means a contractor whose services are limited to 25 tons of cooling and 500,000 BTU of heating in any one system in the execution of contracts requiring the experience, knowledge, and skill to install, maintain, repair, fabricate, alter, extend, or design central air-conditioning, refrigeration, heating, and ventilating systems, including duct work in connection with a complete system. Android and iOS Compatible - Complete the course on your phone, anytime or anywhere.

Get one step closer to becoming a Florida County PROV Master Mechanical Contractor with a prep course designed by 1ExamPrep to help you conquer the Florida County PROV Master Mechanical computer-based examination. Our courses make it convenient and easy for EVERY type of student who is attempting to obtain a contractor’s license. The course includes: Test-taking techniques and tips Tab and highlight locations for every required book Hundreds of Practice questions. We base these per book so you can understand which questions come from which book to better know where to find the answer, as well as final exams to reinforce your test taking skills.

Get one step closer to becoming a Florida Lighting Maintenance Specialty Electrical Contractor with a prep course designed by 1 Exam Prep to help you conquer the required Florida Lighting Maintenance Specialty Electrical Contractor computer based examination. Test taking techniques and tips Highlight and tab locations for the references books Practice questions SCOPE - APPLIES TO THE BELOW: Lighting Maintenance Specialty Electrical Contractor. The scope of certification of a lighting maintenance specialty contractor is limited to the installation, repair, alteration, or replacement of lighting fixtures in or on buildings, signs, billboards, roadways, streets, parking lots and other similar structures. However, the scope of the certification does not include the provision of, or work beyond, the last electrical supplying source, outlet, or disconnecting means.