With resources at a premium, and ecological concerns paramount, the need for clean, efficient and low-cost processes is one of the most critical challenges facing chemical engineers. The ability to control these processes, optimizing one, two or several variables has the potential to make more substantial savings in time, money and resources than any other single factor. Building on the success of the previous editions, this new third edition of A Real-Time Approach to Process Control employs both real industry practice and process control education without the use of complex or highly mathematical techniques, providing a more practical and applied approach. Updated throughout, this edition: • Includes a brand new chapter on Model predictive Control (MPC) • Now includes wireless and web-based technologies • Covers bio-related systems • Details the new multivariable control measure developed by the authors • Includes PowerPoint slides and solutions to Workshop problems on the accompanying website: http://www.wiley.com/go/svrcek-real-time-3e From the reviews of previous editions: “Would appeal to practising engineers due to its “hands on” feel for the subject matter. But more importantly, the authors present these concepts as fundamentals of chemical engineering, in a way that is consistent with how professor teach at the universities.” –Chemical Engineering Process (CEP) “The book has been beautifully crafted” –Engineering Subject Centre “Provides a refreshing approach to the presentation of process analysis and control” –The Chemical Engineer

A hands-on teaching and reference text for chemical engineers In writing this book the authors' have focused exclusively on the vast majority of chemical engineering students who need a basic understanding of practical process control for their industrial careers. Traditionally process control has been taught using non-intuitive and highly mathematical techniques (Laplace and frequency-domain techniques). Aside from being difficult to master in a one-semester course, the traditional approach is of limited use for more complex process control problems encountered in the chemical processing industries. When designing and analyzing multi-loop control systems today, industry practitioners employ both steady-state and dynamic simulation-based methodologies. These 'real time' methods have now all but replaced the traditional approach. A Real Time Approach to Process Control provides the student with both a theoretical and practical introduction to this increasingly important approach. Assuming no prior knowledge of the subject, this text introduces all of the applied fundamentals of process control from instrumentation to process dynamics, PID loops and tuning, to distillation, multi-loop and plant-wide control. In addition, students come away with a working knowledge of the three most popular dynamic simulation packages. The text carefully balances theory and practice by offering students readings and lecture materials along with hands-on workshops that provide a 'virtual' process on which to experiment and from which to learn modern, real time control strategy development. Features: * The first and only textbook to use a completely real time approach. * Gives students the opportunity to understand and use HYSYS software. * Carefully designed workshops (tutorials) have been included to allow students to practice and apply the theory. * Includes many worked examples and student problems. VISIT THE AUTHORS' WEBSITE: www.ench.ucalgary.ca/~realtime

A practical and hands-on discussion of modern distillation control In A Real-time Approach to Distillation Process Control, a team of distinguished researchers and industrial practitioners delivers a practical text combining hands-on and active learning using process simulation with discussions of the fundamental knowledge and tools required to apply modern distillation control principles. The book offers a balanced, real-time approach integrated with practical insights. It includes many exercises designed to be simulator agnostic that can be performed on the process simulator locally available to the reader. Readers will discover explorations of topics including distillation control hardware, distillation composition control, refinery versus chemical plant distillation control, distillation control tuning, advanced regulatory control, and more. They’ll also find: A thorough introduction to distillation fundamentals, as well as basic and advanced modern controls from a practical point of view Comprehensive explorations of known base controls combined with modern control practices Practical discussions of hands-on modelling and simulation exercises, allowing the reader to design and tune controls on a distillation column Fulsome treatments of control structure design integrated with controller tuning using a real-time approach Perfect for senior undergraduate and graduate students studying general process control or distillation process control, A Real-time Approach to Distillation Process Control will also benefit plant managers, production supervisors, startup supervisors, operations engineers, production engineers, and chemical engineers working in industry.

With resources at a premium, and ecological concerns paramount, the need for clean, efficient and low-cost processes is one of the most critical challenges facing chemical engineers. The ability to control these processes, optimizing one, two or several variables has the potential to make more substantial savings in time, money and resources than any other single factor. Building on the success of the previous editions, this new third edition of A Real-Time Approach to Process Control employs both real industry practice and process control education without the use of complex or highly mathematical techniques, providing a more practical and applied approach. Updated throughout, this edition: Includes a brand new chapter on Model predictive Control (MPC) Now includes wireless and web-based technologies Covers bio-related systems Details the new multivariable control measure developed by the authors Includes PowerPoint slides and solutions to Workshop problems on the accompanying website: http://www.wiley.com/go/svrcek-real-time-3e.

This expanded new edition is specifically designed to meet the needs of the process industry, and closes the gap between theory and practice. Back-to-basics approach, with a focus on techniques that have an immediate practical application, and heavy maths relegated to the end of the book Written by an experienced practitioner, highly regarded by major corporations, with 25 years of teaching industry courses Supports the increasing expectations for Universities to teach more practical process control (supported by IChemE)

A Real-Time Approach to Distillation Process Control A practical and hands-on discussion of modern distillation control In A Real-time Approach to Distillation Process Control, a team of distinguished researchers and industrial practitioners delivers a practical text combining hands-on and active learning using process simulation with discussions of the fundamental knowledge and tools required to apply modern distillation control principles. The book offers a balanced, real-time approach integrated with practical insights. It includes many exercises designed to be simulator agnostic that can be performed on the process simulator locally available to the reader. Readers will discover explorations of topics including distillation control hardware, distillation composition control, refinery versus chemical plant distillation control, distillation control tuning, advanced regulatory control, and more. They’ll also find: A thorough introduction to distillation fundamentals, as well as basic and advanced modern controls from a practical point of view Comprehensive explorations of known base controls combined with modern control practices Practical discussions of hands-on modelling and simulation exercises, allowing the reader to design and tune controls on a distillation column Fulsome treatments of control structure design integrated with controller tuning using a real-time approach Perfect for senior undergraduate and graduate students studying general process control or distillation process control, A Real-time Approach to Distillation Process Control will also benefit plant managers, production supervisors, startup supervisors, operations engineers, production engineers, and chemical engineers working in industry.

Success in the continuous process industries depends upon the ability to adapt to the demands of global supply chains in real-time. Thus, process plants must be designed to be easily reconfigured as and when necessary. “A Distributed Coordination Approach to Reconfigurable Process Control” presents research that addresses this issue, via developing a new distributed framework that will enable the building of a process control system that is capable of reconfigurability. This framework views the process as a set of readily-integrated, modular process elements, which operate relatively independently and are each supported by a degree of stand-alone decision-making capability. The rationale and benefits of moving towards the new approach is demonstrated by means of a worked example of a real process plant. The research will also help end-users to gain an understanding of the economic aspects of material flows across their plants, and the ways in which their processes can be integrated across the enterprise.

Based on a series of lectures given at a Vacation School for postgraduate students in the areas of control and instrumentation, held at the University of Sheffield. It covers four major themes: design and tuning of controllers, the hardware technology, software design and applications.

This third edition provides chemical engineers with process control techniques that are used in practice while offering detailed mathematical analysis. Numerous examples and simulations are used to illustrate key theoretical concepts. New exercises are integrated throughout several chapters to reinforce concepts. Up-to-date information is also included on real-time optimization and model predictive control to highlight the significant impact these techniques have on industrial practice. And chemical engineers will find two new chapters on biosystems control to gain the latest perspective in the field.

Addressing the needs of engineers interested in controlling a continuous process and designed to help technicians, salespeople, students, managers and others handle 'real-life' industrial concerns. This book belongs in every library. Divided into two parts, Part I provides a general background on the elements needed for continuous process control. Measurements, control systems, and final control elements are discussed. Simple and complex control techniques including model predictive control are described in detail. Part II shows how these elements are combined to control actual processes. Control strategies are explained and related to process problems and objectives. Specific control designs needed to implement the strategies are described. These designs address such problems as difficult measurements, frequent disturbances, and interacting loops. Contents: Part I: Introduction, Continuous Process Characteristics, Measurement, Pressure and Temperature, Inventory and Throughput, Composition, Control Elements, Controllability, Controllers, Advanced Control Techniques, Control System Architecture, Control System Implementation, Evaluation.Part II: Fired Heater, Exothermic Reactor, Boiler Control, Wastewater Neutralization, Evaporator, Distillation, Gas Fractionation, Paper Mill Steam and Power Distribution, Nitric Acid, Supervisory Control of a Cat Cracker.