Adaptive Systems in Control and Signal Processing 1983 is a compendium of papers presented at the International Federation of Automatic Control in San Francisco on June 20-22, 1983. One paper addresses the results through comparative alternative algorithms in adaptive control of linear time invariant and time varying systems. Another paper presents a method in computer simulation of a wide range of stable plants to achieve an alternative approach in designing an adaptive control system. The book also compares the stability and the sensitivity approach involving the design of model-reference adaptive systems. The authors involved explain that the sensitivity concept determines the "dynamic speed of adaptation," while the stability concept focuses on finding a linear compensator for any deviant signal. One paper proposes an indirect adaptive control algorithm for MIMO square full rank minimum phase systems, while another paper discusses the application of the discrete time multivariable adaptive control system, to non-minimum phase plants with an unknown dead time. This book can prove valuable to engineers and researchers of electrical, computer, and mechanical engineering. It can also be helpful for technicians and students dealing with automatic control and telecontrol.

Theory and Application of Digital Control contains the proceedings of the IFAC Symposium held at New Delhi, India on January 5-7, 1982. This book particularly presents the texts of the five plenary talks and the 110 papers of the symposium. This book organizes the papers into 109 chapters, with nearly one-third of the papers focus on digital control, particularly, software and hardware of control using microcomputers; computer-aided design; and adaptive control and modeling for digital control. Another set of papers deal with several applications of digital control techniques in solving interesting problems of socio economic systems, electrical power systems, bio systems, and artificial satellites. The reader will benefit hugely from the topics in this book that span several important theoretical and applied areas of the fast-changing topic of digital control.

The introduction of the microprocessor in computer and system engineering has motivated the development of many new concepts and has simplified the design of many modern industrial systems. During the first decade of their life. microprocessors have shown a tremendous evolution in all possible directions (technology. power. functionality. I/O handling. etc). Of course putting the microprocessors and their environmental devices into properly operating systems is a complex and difficult task requiring high skills for melding and integrating hardware. and systemic components. software This book was motivated by the editors' feeling that a cohesive reference is needed providing a good coverage of modern industrial applications of microprocessor-based real time control, together with latest advanced methodological issues. Unavoidably a single volume cannot be exhaustive. but the present book contains a sufficient number of important real-time applications. The book is divided in two sections. Section I deals with general hardware. software and systemic topics. and involves six chapters. Chapter 1. by Gupta and Toong. presents an overview of the development of microprocessors during their first twelve years of existence. Chapter 2. by Dasgupta. deals with a number of system software concepts for real time microprocessor-based systems (task scheduling. memory management. input-output aspects. programming language reqUirements.

Adaptive control has been a remarkable field for industrial and academic research since 1950s. Since more and more adaptive algorithms are applied in various control applications, it is becoming very important for practical implementation. As it can be confirmed from the increasing number of conferences and journals on adaptive control topics, it is certain that the adaptive control is a significant guidance for technology development.The authors the chapters in this book are professionals in their areas and their recent research results are presented in this book which will also provide new ideas for improved performance of various control application problems.

This book describes important techniques, developments, and applications of computational intelligence in system control. Chapters present: an introduction to the fundamentals of neural networks, fuzzy logic, and evolutionary computing a rigorous treatment of intelligent control industrial applications of intelligent control and soft computing, including transportation, petroleum, motor drive, industrial automation, and fish processing other knowledge-based techniques, including vehicle driving aid and air traffic management Intelligent Adaptive Control provides a state-of-the-art treatment of practical applications of computational intelligence in system control. The book cohesively covers introductory and advanced theory, design, implementation, and industrial use - serving as a singular resource for the theory and application of intelligent control, particularly employing fuzzy logic, neural networks, and evolutionary computing.

Software for Computer Control is a collection of papers and lectures presented at the Second IFAC/IFIP Symposium on Software for Computer Control, held in Prague, Czechoslovakia in June 1979. The symposium is organized with the hope of making vital contributions to the development of the computer sciences. The text focuses on the design and programming of process control systems used in various industrial processes and experiments. Topics covered include communication control in computer networks; program generators for process control applications; methods for the design of control software; presentations on software for microprocessors; real-time languages; algorithms for computer control; and applications of computer control in sciences. Computer scientists, systems analysts, programmers, and students of computer science will benefit from this book.

Considers the application of modern control engineering on digital computers with a view to improving productivity and product quality, easing supervision of industrial processes and reducing energy consumption and pollution. The topics covered may be divided into two main subject areas: (1) applications of digital control - in the chemical and oil industries, in water turbines, energy and power systems, robotics and manufacturing, cement, metallurgical processes, traffic control, heating and cooling; (2) systems theoretical aspects of digital control - adaptive systems, control aspects, multivariable systems, optimization and reliability, modelling and identification, real-time software and languages, distributed systems and data networks. Contains 84 papers.

Instrument Engineers' Handbook – Volume 3: Process Software and Digital Networks, Fourth Edition is the latest addition to an enduring collection that industrial automation (AT) professionals often refer to as the "bible." First published in 1970, the entire handbook is approximately 5,000 pages, designed as standalone volumes that cover the measurement (Volume 1), control (Volume 2), and software (Volume 3) aspects of automation. This fourth edition of the third volume provides an in-depth, state-of-the-art review of control software packages used in plant optimization, control, maintenance, and safety. Each updated volume of this renowned reference requires about ten years to prepare, so revised installments have been issued every decade, taking into account the numerous developments that occur from one publication to the next. Assessing the rapid evolution of automation and optimization in control systems used in all types of industrial plants, this book details the wired/wireless communications and software used. This includes the ever-increasing number of applications for intelligent instruments, enhanced networks, Internet use, virtual private networks, and integration of control systems with the main networks used by management, all of which operate in a linked global environment. Topics covered include: Advances in new displays, which help operators to more quickly assess and respond to plant conditions Software and networks that help monitor, control, and optimize industrial processes, to determine the efficiency, energy consumption, and profitability of operations Strategies to counteract changes in market conditions and energy and raw material costs Techniques to fortify the safety of plant operations and the security of digital communications systems This volume explores why the holistic approach to integrating process and enterprise networks is convenient and efficient, despite associated problems involving cyber and local network security, energy conservation, and other issues. It shows how firewalls must separate the business (IT) and the operation (automation technology, or AT) domains to guarantee the safe function of all industrial plants. This book illustrates how these concerns must be addressed using effective technical solutions and proper management policies and practices. Reinforcing the fact that all industrial control systems are, in general, critically interdependent, this handbook provides a wide range of software application examples from industries including: automotive, mining, renewable energy, steel, dairy, pharmaceutical, mineral processing, oil, gas, electric power, utility, and nuclear power.

Case Studies in Control presents a framework to facilitate the use of advanced control concepts in real systems based on two decades of research and over 150 successful applications for industrial end-users from various backgrounds. In successive parts the text approaches the problem of putting the theory to work from both ends, theoretical and practical. The first part begins with a stress on solid control theory and the shaping of that theory to solve particular instances of practical problems. It emphasizes the need to establish by experiment whether a model-derived solution will perform properly in reality. The second part focuses on real industrial applications based on the needs and requirements of end-users. Here, the engineering approach is dominant but with theoretical input of varying degree depending on the particular process involved. Following the illustrations of the progress that can be made from either extreme of the well-known theory–practice divide, the text proceeds to a third part related to the development of tools that enable simpler use of advanced methods, a need only partially met by available commercial products. Each case study represents a self-contained unit that shows an experimental application of a particular method, a practical solution to an industrial problem or a toolkit that makes control design and implementation easier or more efficient. Among the applications presented are: wastewater treatment; manufacturing of electrical motors ; temperature control of blow moulding; burn-protective garments quality assessment; and rapid prototyping. Written by contributors with a considerable record of industrially-applied research, Case Studies in Control will encourage interaction between industrial practitioners and academic researchers and be of benefit to both, helping to make theory realistic and practical implementation more thorough and efficacious. Advances in Industrial Control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.