This book discusses the latest advances in digital modeling systems (DMSs) and additive manufacturing (AM) technologies. It covers applications of networked technologies, ubiquitous computing, new materials and hybrid production systems, discussing how they are changing the processes of conception, modeling and production of products and systems of product. The book emphasizes ergonomic and sustainability issues, as well as timely topics such as DMSs and AM in Industry 4.0, DMSs and AM in developing countries, DMSs and AM in extreme environments, thus highlighting future trends and promising scenarios for further developing those technologies. Based on the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, held on July 24-28, 2019, in Washington D.C., USA, the book is intended as source of inspiration for researchers, engineers and stakeholders, and to foster interdisciplinary and international collaborations between them.

Additive Manufacturing, Modeling Systems and 3D Prototyping Proceedings of the 13th International Conference on Applied Human Factors and Ergonomics (AHFE 2022), July 24–28, 2022, New York, USA

This edited book is a compilation of scholarly articles on the latest developments in the field of additive manufacturing, discussing nature-inspired and artificial intelligence–aided additive manufactured processes for different materials including biomanufacturing, and their applications, as well as various methods to enhance the characteristics of the materials produced, the efficiency of the manufacturing process itself, as well as optimal ways to develop a product in minimum time. The book explores the advancements in additive manufacturing from prefabrication stage to final product, with real-time defect detection, control, and process efficiency improvement covered. This book will be a great resource for engineers, researchers, and academics involved in this revolutionary and unique field of manufacturing. - Discusses modeling of additive manufacturing processes by artificial intelligence - Looks at the optimization of designs, technologies, and material fabrication and the use of simulation in additive manufacturing - Includes case studies and real-world industrial problems and solutions

High Value Manufacturing is the result of the 6th International Conference on Advanced Research in Virtual and Rapid Prototyping, held in Leiria, Portugal, October 2013. It contains current contributions to the fi eld of virtual and rapid prototyping (V&RP) and is also focused on promoting better links between industry and academia. This volume comprises a collection of more than 110 reviewed papers which cover a wide range of topics, such as Additive and Nano Manufacturing Technologies, Biomanufacturing, Materials, Rapid Tooling and Manufacturing, CAD and 3D Data Acquisition Technologies, Simulation and Virtual Environments, and novel applications. High Value Manufacturing is intended for engineers, designers and manufacturers who are active in the fi elds of mechanical, industrial and biomedical engineering.

Sensory Polymers: From their Design to Practical Applications discusses recent developments in the field of sensory polymers and showcases the potential applications of these materials in food control and security, civil security, the biomedical field, environmental control and remediation, industrial control of chemicals, and more. Written by worldwide experts in the field, chapters provide in-depth knowledge on several different polymer sensors and their response to different stimuli, which makes this book a valuable resource for researchers and advanced students in polymer science, materials science, and chemistry, as well as those interested on sensing applications and chemical sensory systems, including industry R&D. - Discusses the foundation of sensory polymers, from material design to development and production - Explores state-of-the-art applications in environmental control, biomedicine, sensing, the chemical industry, and food science - Provides perspectives and future applications of polymer chemosensors

This volume focuses on the fundamentals of additive manufacturing and its components, explains why and what we do, outlines what is crucial to the user, offers details on important applications such as in the aerospace, automotive, or medical areas, and the difficult certification process. This book explores the advancements in additive manufacturing which produces solid, free-form, nearly net-shaped objects. This refers to items that are easy to use, out-of-the-box, and not bound by the design constraints of modern manufacturing techniques. AM expands the definition of 3D printing to encompass a variety of procedures that begin with a three-dimensional computer model, incorporate an AM production procedure, and result in a useful product. The AM process can be confusing due to the rapid rise of competing techniques for fabricating 3D parts. This volume provides a thorough review of the basic components and procedures involved in additive manufacturing. It outlines a road map for where to begin, what to study, how everything goes together, and how AM might enable ideas outside traditional processing to realize those ideas in AM. Furthermore, this book investigates the benefits of AM including affordable access to 3D solid modeling software. With this software, learning is achieved without having to invest in costly industrial equipment. AM encompasses a variety of techniques, including those that use high-intensity beams to fuse powder or wire, and hybrid techniques that combine additive and subtractive manufacturing techniques. AM-related processes have developed at breakneck speed, giving rise to a deluge of acronyms and terminology, not to mention the emergence, acquisition, and demise of new businesses. By combining ideas and aspirations, better methods will be revealed that result in useful products that will serve and contribute to a lasting future. Although expensive commercial additive manufacturing equipment can cost hundreds of thousands to millions of dollars, a lack of access to equipment does not preclude the study of the technology. 3D printing services will undoubtedly become more reasonable for small- and medium-sized organizations as their prices decline. Hybrid 3D plastic printing technologies and low-cost hobbyist 3D weld deposition systems are already in development which will make the best 3D printers accessible and affordable. This book will assist the reader in determining what is required to begin, which software, supplies, and procedures best suit, and where to obtain additional information. Audience The book will be used by engineers and R&D researchers involved in advanced additive manufacturing technology, postgraduate students in various disciplines such as mechanical, manufacturing, biomedical, and industrial engineering, etc. It will also serve as a reference manual for manufacturing and materials engineers involved in additive manufacturing and product development.

These proceedings represent the work of contributors to the 24th European Conference on Knowledge Management (ECKM 2023), hosted by Iscte – Instituto Universitário de Lisboa, Portugal on 7-8 September 2023. The Conference Chair is Prof Florinda Matos, and the Programme Chair is Prof Álvaro Rosa, both from Iscte Business School, Iscte – Instituto Universitário de Lisboa, Portugal. ECKM is now a well-established event on the academic research calendar and now in its 24th year the key aim remains the opportunity for participants to share ideas and meet the people who hold them. The scope of papers will ensure an interesting two days. The subjects covered illustrate the wide range of topics that fall into this important and ever-growing area of research. The opening keynote presentation is given by Professor Leif Edvinsson, on the topic of Intellectual Capital as a Missed Value. The second day of the conference will open with an address by Professor Noboru Konno from Tama Graduate School and Keio University, Japan who will talk about Society 5.0, Knowledge and Conceptual Capability, and Professor Jay Liebowitz, who will talk about Digital Transformation for the University of the Future. With an initial submission of 350 abstracts, after the double blind, peer review process there are 184 Academic research papers, 11 PhD research papers, 1 Masters Research paper, 4 Non-Academic papers and 11 work-in-progress papers published in these Conference Proceedings. These papers represent research from Australia, Austria, Brazil, Bulgaria, Canada, Chile, China, Colombia, Cyprus, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, India, Iran, Iraq, Ireland, Israel, Italy, Japan, Jordan, Kazakhstan, Kuwait, Latvia, Lithuania, Malaysia, México, Morocco, Netherlands, Norway, Palestine, Peru, Philippines, Poland, Portugal, Romania, South Africa, Spain, Sweden, Switzerland, Taiwan, Thailand, Tunisia, UK, United Arab Emirates and the USA.

This book gathers the proceedings of the 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing (AMP 2020), held in Belgrade, Serbia, on 1–4 June 2020. The event marks the latest in a series of high-level conferences that bring together experts from academia and industry to exchange knowledge, ideas, experiences, research findings, and information in the field of manufacturing. The book addresses a wide range of topics, including: design of smart and intelligent products, developments in CAD/CAM technologies, rapid prototyping and reverse engineering, multistage manufacturing processes, manufacturing automation in the Industry 4.0 model, cloud-based products, and cyber-physical and reconfigurable manufacturing systems. By providing updates on key issues and highlighting recent advances in manufacturing engineering and technologies, the book supports the transfer of vital knowledge to the next generation of academics and practitioners. Further, it will appeal to anyone working or conducting research in this rapidly evolving field.

This seminal compendium, available through open access, illuminates the forefront of digital collaboration in production. It introduces the visionary concept of the Internet of Production (IoP), an ambitious initiative by Germany's esteemed Cluster of Excellence at RWTH Aachen University. This handbook pioneers the integration of data, models, and knowledge across development, production, and user cycles, offering interdisciplinary insights into production technology's horizons with the overall objective to create a worldwide lab. The work is organized into seven key parts, each contributing to a comprehensive understanding of the IoP. Part I lays the foundation with interdisciplinary visions and concepts. Part II delves into IoP's infrastructure, encompassing digital shadows and actionable artificial intelligence. Part III examines materials within the digitalized production landscape. Part IV confronts the challenges and potentials of production processes under novel digitalization methods. Part V focuses on production management with data-driven decision support, while Part VI explores agile development processes. Finally, Part VII delves into the interplay between internal and external perspectives in the IoP, human-centered work design, and platform-based ecosystems. Supported by the German Research Foundation (DFG), this compendium redefines manufacturing through the transformative IoP lens. Embrace this scholarly endeavor to embrace technological advancement. This is an open access book.

Proceedings of the 14th International Conference on Applied Human Factors and Ergonomics (AHFE 2023), July 20–24, 2023, San Francisco, USA