The 33 papers presented in this book were selected from amongst the 97 papers presented during the sixth edition of the International Conference on Integrated Design and Manufacturing in Mechanical Engineering during 28 sessions. This conference represents the state-of-the-art research in the field. Two keynote papers introduce the subject of the Conference and are followed by the different themes highlighted during the conference.

This book presents a selection of papers related to the fifth edition of book further to the International Conference on Integrated Design and Manufacturing in Mechanical Engineering. This Conference has been organized within the framework of the activities of the AIP-PRIMECA network whose main scientific field is Integrated Design applied to both Mechanical Engineering and Productics. This network isorganized along the lines of a joint project: the evolution, in the field of training of Integrated Design in Mechanics and Productics, in quite close connection with the ever changing industrial needs over the past 20 years. It is in charge of promoting both exchanges of experience and know-how capitalisation. It has a paramount mission to fulfil, be it in the field of initial and continuous education, technological transfer and knowledge dissemination through strong links with research labs. For the second time, in fact, the IDMME Conference has been held abroad and, after Canada in 2000, the United Kingdom, more particularly Bath University, has been retained under the responsibility of Professor Alan Bramley, the Chairman of the Scientific Committee of the conference. The Scientific Committee members have selected all the lectures from com mplete papers, which is the guarantee for the Conference of quite an outstanding scientific level. After that, a new selection hasbeen carried out to retain the best publications, which establish in a book, a state-of-the-art analysis as regards Integrated Design and Manufacturing in the discipline of Mechanical Engineering.

This book presents recent advances in the integration and the optimization of product design and manufacturing systems. The book is divided into 3 chapters corresponding to the following three main topics : - optimization of product design process (mechanical design process, mass customization, modeling the product representation, computer support for engineering design, support systems for tolerancing, simulation and optimization tools for structures and for mechanisms and robots), -optimization of manufacturing systems (multi-criteria optimization and fuzzy volumes, tooth path generation, machine-tools behavior, surface integrity and precision, process simulation), - methodological aspects of integrated design and manufacturing (solid modeling, collaborative tools and knowledge formalization, integrating product and process design and innovation, robust and reliable design, multi-agent approach in VR environment). The present book is of interest to engineers, researchers, academic staff, and postgraduate students interested in integrated design and manufacturing in mechanical engineering.

This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

Maximizing reader insights into the key scientific disciplines of Machine Tool Metrology, this text will prove useful for the industrial-practitioner and those interested in the operation of machine tools. Within this current level of industrial-content, this book incorporates significant usage of the existing published literature and valid information obtained from a wide-spectrum of manufacturers of plant, equipment and instrumentation before putting forward novel ideas and methodologies. Providing easy to understand bullet points and lucid descriptions of metrological and calibration subjects, this book aids reader understanding of the topics discussed whilst adding a voluminous-amount of footnotes utilised throughout all of the chapters, which adds some additional detail to the subject. Featuring an extensive amount of photographic-support, this book will serve as a key reference text for all those involved in the field.

Analysis and Optimization of Sheet Metal Forming Processes comprehensively covers sheet metal forming, from choosing materials, tools and the forming method to optimising the entire process through finite element analysis and computer-aided engineering. Beginning with an introduction to sheet metal forming, the book provides a guide to the various techniques used within the industry. It provides a discussion of sheet metal properties relevant to forming processes, such as ductility, formability, and strength, and analyses how materials should be selected with factors including material properties, cost, and availability. Forming processes including shearing, bending, deep drawing, and stamping are also discussed, along with tools such as dies, punches, and moulds. Simulation and modelling are key to optimising the sheet metal forming process, including finite element analysis and computer-aided engineering. Other topics included are quality control, design, industry applications, and future trends. The book will be of interest to students and professionals working in the field of sheet metal and metal forming, materials science, mechanical engineering, and metallurgy.

This book reports on innovative concepts and practical solutions at the intersection between engineering design, production and industrial management. It covers cutting-edge design, modeling and control of dynamic and multiphysics systems, knowledge management systems in industry 4.0, cyber-physical production systems, additive and sustainable manufacturing and many other related topics. It also highlights important collaborative works between different countries and between industry and universities. Gathering the proceedings of the 12th International Conference on Integrated Design and Production, CPI 2022, held on May 10-12, 2022, at École Nationale Supérieure d'Arts et Métiers (ENSAM), in Rabat, Morocco, this book gathers carefully peer-reviewed chapters, with extensive information for researchers and professionals in the broad area of engineering design, production and management.

The second volume of the series is devoted to applications of mechatronics in material processing and robotics. Both classical machining methods, such as extrusion, forging and milling, and modern ones, such as plasma and ultrasonic machining, are analyzed. An extensive part covers the modeling of these processes, also from a phenomenological point of view. The study analyzes the issues related to robotics in various technological processes as well.

This book constitutes the refereed proceedings of the 7th International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2015, held in Valencia, Spain, in September 2015. The 19 revised full papers presented together with one invited talk were carefully reviewed and selected from 27 submissions. The papers are organized in the following topical sections: surveys, conceptual design and validation, digital factories and manufacturing control systems, ARUM: adaptive production management, and smart grids, complex networks and big data.