The two-volume set IFIP AICT 513 and 514 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2017, held in Hamburg, Germany, in September 2017. The 121 revised full papers presented were carefully reviewed and selected from 163 submissions. They are organized in the following topical sections: smart manufacturing system characterization; product and asset life cycle management in smart factories of industry 4.0; cyber-physical (IIoT) technology deployments in smart manufacturing systems; multi-disciplinary collaboration in the development of smart product-service solutions; sustainable human integration in cyber-physical systems: the operator 4.0; intelligent diagnostics and maintenance solutions; operations planning, scheduling and control; supply chain design; production management in food supply chains; factory planning; industrial and other services; operations management in engineer-to-order manufacturing; gamification of complex systems design development; lean and green manufacturing; and eco-efficiency in manufacturing operations.

This book covers a variety of topics in manufacturing, with a special emphasis on product design, production planning, and implementation of both resources and production processes. The content is based on papers presented at the 6th International Scientific Technical Conference MANUFACTURING 2019, held in Poznan, Poland on May 19-22, 2019. The main focus is on showing best practices to use tools currently available in the enterprises to effectively improving industrial processes. Knowledge and production flow management, decision-making systems, production leveling, enterprise efficiency, as well as maintenance, modeling and simulation of production processes are just some of the topics discussed in this book, which offers a timely and practice-oriented reference guide for applied researchers, product engineers and product managers.

This book presents endeavors to join synergies in order to create added value for society, using the latest scientific knowledge to boost technology transfer from academia to industry. It potentiates the foundations for the creation of knowledge- and entrepreneurial cooperation networks involving engineering, innovation, and entrepreneurship stakeholders. The Regional HELIX 2018 conference was organized at the University of Minho’s School of Engineering by the MEtRICs and Algoritmi Research Centers, and took place in Guimarães, Portugal, from June 27th to 29th, 2018. After a rigorous peer-review process, 160 were accepted for publication, covering a wide range of topics, including Control, Automation and Robotics; Mechatronics Design, Medical Devices and Wellbeing; Cyber-Physical Systems, IoT and Industry 4.0; Innovations in Industrial Context and Advanced Manufacturing; New Trends in Mechanical Systems Development; Advanced Materials and Innovative Applications; Waste to Energy and Sustainable Environment; Operational Research and Industrial Mathematics; Innovation and Collaborative Arrangements; Entrepreneurship and Internationalization; and Oriented Education for Innovation, Engineering and/or Entrepreneurship.

The two-volume set IFIP AICT 566 and 567 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2019, held in Austin, TX, USA. The 161 revised full papers presented were carefully reviewed and selected from 184 submissions. They discuss globally pressing issues in smart manufacturing, operations management, supply chain management, and Industry 4.0. The papers are organized in the following topical sections: lean production; production management in food supply chains; sustainability and reconfigurability of manufacturing systems; product and asset life cycle management in smart factories of industry 4.0; variety and complexity management in the era of industry 4.0; participatory methods for supporting the career choices in industrial engineering and management education; blockchain in supply chain management; designing and delivering smart services in the digital age; operations management in engineer-to-order manufacturing; the operator 4.0 and the Internet of Things, services and people; intelligent diagnostics and maintenance solutions for smart manufacturing; smart supply networks; production management theory and methodology; data-driven production management; industry 4.0 implementations; smart factory and IIOT; cyber-physical systems; knowledge management in design and manufacturing; collaborative product development; ICT for collaborative manufacturing; collaborative technoloy; applications of machine learning in production management; and collaborative technology.

This 4-volume set, IFIP AICT 689-692, constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2023, held in Trondheim, Norway, during September 17–21, 2023. The 213 full papers presented in these volumes were carefully reviewed and selected from a total of 224 submissions. They were organized in topical sections as follows: Part I : Lean Management in the Industry 4.0 Era; Crossroads and Paradoxes in the Digital Lean Manufacturing World; Digital Transformation Approaches in Production Management; Managing Digitalization of Production Systems; Workforce Evolutionary Pathways in Smart Manufacturing Systems; Next Generation Human-Centered Manufacturing and Logistics Systems for the Operator 5.0; and SME 5.0: Exploring Pathways to the Next Level of Intelligent, Sustainable, and Human-Centered SMEs. Part II : Digitally Enabled and Sustainable Service and Operations Management in PSS Lifecycle; Exploring Digital Servitization in Manufacturing; Everything-as-a-Service (XaaS) Business Models in the Manufacturing Industry; Digital Twin Concepts in Production and Services; Experiential Learning in Engineering Education; Lean in Healthcare; Additive Manufacturing in Operations and Supply Chain Management; and Applications of Artificial Intelligence in Manufacturing. Part III : Towards Next-Generation Production and SCM in Yard and Construction Industries; Transforming Engineer-to-Order Projects, Supply Chains and Ecosystems; Modelling Supply Chain and Production Systems; Advances in Dynamic Scheduling Technologies for Smart Manufacturing; and Smart Production Planning and Control. Part IV : Circular Manufacturing and Industrial Eco-Efficiency; Smart Manufacturing to Support Circular Economy; Product Information Management and Extended Producer Responsibility; Product and Asset Life Cycle Management for Sustainable and Resilient Manufacturing Systems; Sustainable Mass Customization in the Era of Industry 5.0; Food and Bio-Manufacturing; Battery Production Development and Management; Operations and SCM in Energy-Intensive Production for a Sustainable Future; and Resilience Management in Supply Chains.

Machine learning (ML) offers the potential to train data-based models and therefore to extract knowledge from data. Due to an increase in networking and digitalization, data and consequently the application of ML are growing in production. The creation of ML models includes several tasks that need to be conducted within data integration, data preparation, modeling, and deployment. One key design decision in this context is the selection of the hyperparameters of an ML algorithm – regardless of whether this task is conducted manually by a data scientist or automatically by an AutoML system. Therefore, data scientists and AutoML systems rely on hyperparameter optimization (HPO) techniques: algorithms that automatically identify good hyperparameters for ML algorithms. The selection of the HPO technique is of great relevance, since it can improve the final performance of an ML model by up to 62 % and reduce its errors by up to 95 %, compared to computing with default values. As the selection of the HPO technique depends on different domain-specific influences, it becomes more and more popular to use decision support systems to facilitate this selection. Since no approach exists, which covers the requirements from the production domain, the main research question of this thesis was: Can a decision support system be developed that supports in the selecting of HPO techniques in the production domain?

Proceedings of the 5th International Conference on Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems, February 22–24, 2022, Venice, Italy

The book presents latest research-based innovations in the field of mechanical infrastructure presented in the International Conference on Recent Advances in Mechanical Infrastructure (ICRAM 2021). The broad research topics presented in this book are recent advances in thermal infrastructure: This includes aerodynamics, renewable energy, computational fluid dynamics, carbon dioxide capture and sequestration, energy and thermo-fluids, fluid dynamics, fuels and combustion, heat and mass transfer, internal combustion engine, and refrigeration and air conditioning. Recent advances in manufacturing infrastructure includes green manufacturing, instrumentation and control, material characterization, manufacturing techniques, rapid prototyping, polymers, and composites. Recent advances in infrastructure planning and design includes applied mechanics, bio-mechanics, computer-aided engineering design, finite element analysis, industrial tribology, machine design, robotics and automation, dynamics and vibration, industrial engineering, and optimization.