Aircraft Control Allocation Wayne Durham, Virginia Polytechnic Institute and State University, USA Kenneth A. Bordignon, Embry-Riddle Aeronautical University, USA Roger Beck, Dynamic Concepts, Inc., USA An authoritative work on aircraft control allocation by its pioneers Aircraft Control Allocation addresses the problem of allocating supposed redundant flight controls. It provides introductory material on flight dynamics and control to provide the context, and then describes in detail the geometry of the problem. The book includes a large section on solution methods, including 'Banks' method', a previously unpublished procedure. Generalized inverses are also discussed at length. There is an introductory section on linear programming solutions, as well as an extensive and comprehensive appendix dedicated to linear programming formulations and solutions. Discrete-time, or frame-wise allocation, is presented, including rate-limiting, nonlinear data, and preferred solutions. Key features: Written by pioneers in the field of control allocation. Comprehensive explanation and discussion of the major control allocation solution methods. Extensive treatment of linear programming solutions to control allocation. A companion web site contains the code of a MATLAB/Simulink flight simulation with modules that incorporate all of the major solution methods. Includes examples based on actual aircraft. The book is a vital reference for researchers and practitioners working in aircraft control, as well as graduate students in aerospace engineering.

Written by leading experts in the field, this book provides the state-of-the-art in terms of fault tolerant control applicable to civil aircraft. The book consists of five parts and includes online material.

Aircraft operating as so-called High Altitude Platform Systems (HAPS) have been considered as a complementary technology to satellites since several years. These aircraft can be used for similar communication and monitoring tasks while operating at a fraction of the cost. Such concepts have been successfully tested. Those include the AeroVironment Helios and the Airbus Zephyr, with an endurance of nearly 624 hours (26 days). All these HAPS aircraft have a high-aspect-ratio wing using lightweight construction. In gusty atmosphere, this results in high bending moments and high structural loads, which can lead to overloads. Aircraft crashes, for example from Google’s Solara 50 or Facebook’s Aquila give proof of that fact. Especially in the troposphere, where the active weather takes place, gust loads occur, which can lead to the destruction of the structure. The Airbus Zephyr, the only HAPS aircraft without flight accidents, provides only a very small payload. Thus it does not fully comply with the requirements for future HAPS aircraft. To overcome the shortcomings of such single-wing aircraft, so-called multibody aircraft are considered to be an alternative. The concept assumes multiple aircraft connected to each other at their wingtips. It goes back to the German engineer Dr. Vogt. In the United States, shortly after the end of World War II, he experimented with the coupling of manned aircraft. This resulted in a high-aspect-ratio wing for the aircraft formation. The range of the formation could be increased correspondingly. The engineer Geoffrey S. Sommer took up Vogt’s idea and patented an aircraft configuration consisting of several unmanned aerial vehicles coupled at their wingtips. However, the patent does not provide any insight into the flight performance, the flight mechanical modeling or the control of such an aircraft. Single publications exist that deal with the performance of coupled aircraft. A profound, complete analysis, however, is missing so far. This is where the present work starts. For the first time, a flying vehicle based on the concept of the multibody aircraft will be analyzed in terms of flight mechanics and flight control. In a performance analysis, the aircraft concept is analyzed in detail and the benefits in terms of bending moments and flight performance are clearly highlighted. Limits for operation in flight are shown considering aerodynamic optimal points. The joints at the wingtips allow a roll and pitch motion of the individual aircraft. This results in additional degrees of freedom for the design through the implementation of different relative pitch and bank angles. For example, using individual pitch angles for individual aircraft further decreases the induced drag and increases flight performance. Because the lift is distributed symmetrically, but not homogenously along the wingspan, a lateral trim of the individual aircraft in formation flight becomes necessary. The thesis presents a new method to implement this trim by moving the battery mass along half the wingspan, which avoids additional parasite drag. Further, a complete flight dynamics model is provided and analyzed for aircraft that are mechanically connected at their wingtips. To study this model in detail, a hypothetical torsional and bending spring between the aircraft is introduced. If the spring constants are very high, the flight dynamics model has properties similar to those of an elastic aircraft. Rigid-body and formation eigenmotions can be clearly distinguished. If the spring constants are reduced towards zero, which represents the case of the multibody aircraft, classical flight mechanics eigenmotions and modes resulting from the additional degrees of freedom are coupled. This affects the eigenstructure of the aircraft. Hence, normal motions with respect to the inertial space as known from a rigid aircraft cannot be observed anymore. The plant also reveals unstable behavior. Using the non-linear flight dynamics model, flight controllers are designed to stabilize the plant and provide the aircraft with an eigenstructure similar to conventional aircraft. Different controller design methods are used. The flight controller shall further maintain a determined shape of the flight formation, it shall control flight, bank and pitch angles, and it shall suppress disturbances. Flight control theories in the time domain (Eigenstructure assignment) and in the frequency domain (H-infinity loop-shaping) are considered. The resulting inner-control loops yield a multibody aircraft behavior that is similar to the one of a rigid aircraft. For the outer-control loops, classical autopilot concepts are applied. Overall, the flight trajectory of the multibody aircraft above ground is controlled and, thus, an actual operation as HAPS is possible. In the last step, the flight controller is successfully validated in non-linear simulations with complete flight dynamics. Flugzeuge in der Form von sogenannten Höhenplattformen (engl. High-Altitude Platform Systems, HAPS) werden seit einigen Jahren als kostengünstige Ergänzung zu teuren Satelliten betrachtet. Diese Flugzeuge können für ähnliche Kommunikations- und überwachungsaufgaben eingesetzt werden. Zu den gegenwärtigen Konzepten solcher Fluggeräte, die bereits erfolgreich im Flugversuch eingesetzt wurden, zählen der Helios von AeroVironment und der Airbus Zephyr, der eine Flugdauer von fast 624 Stunden (26 Tagen) erreicht hat. Alle diese HAPS-Flugzeuge besitzen einen Flügel langer Streckung, der in Leichtbauweise konstruiert ist. Hieraus resultieren in böiger Atmosphäre hohe Biegemomente und starke strukturelle Belastungen, die zu überbelastungen führen können. Flugunfälle beispielsweise von Googles Solara 50 oder Facebooks Aquila belegen dies. Insbesondere in der Troposphäre, in der das aktive Wetter stattfindet, treten Böenlasten auf, die die Struktur zerstören können. Der Airbus Zephyr, der bisher als einziges HAPS-Flugzeug frei von Flugunfällen ist, besitzt nur eine sehr geringe Nutzlast. Daher kann er die Anforderungen an zukünftige HAPS-Flugzeuge nicht vollständig erfüllen. Um die Schwachstellen solcher Ein-Flügel-Konzepte zu überwinden, wird in dieser Arbeit ein alternatives Flugzeugkonzept betrachtet, das als Mehrkörperflugzeug bezeichnet wird. Das Konzept geht von mehreren, an den Flügelspitzen miteinander verbundenen Flugzeugen aus und beruht auf Ideen des deutschen Ingenieurs Dr. Vogt. Dieser hatte in den USA kurz nach Ende des Zweiten Weltkrieges bemannte Flugzeuge aneinanderkoppeln lassen. Hierdurch ergab sich ein Flugzeugverbund mit einem Flügel langer Streckung. Damit konnte die Reichweite des Verbundes gesteigert werden. Geoffrey S. Sommer griff die Idee von Vogt auf und lies sich eine Flugzeugkonfiguration patentieren, die aus mehreren, unbemannten Flugzeugen besteht, die an den Enden der Tragflächen miteinander gekoppelt sind. Die Patentschrift gibt jedoch keinen Einblick in die Flugleistungen, die flugmechanische Modellierung oder die Regelung eines solchen Fluggerätes. Vereinzelt existieren Veröffentlichungen, die sich mit den Flugleistungen von gekoppelten Luftfahrzeugen beschäftigen. Eine tiefgreifende, vollständige flugmechanische Analyse fehlt jedoch bisher. Hier setzt die vorliegende Arbeit an. Ein Fluggerät basierend auf dem Konzept des Mehrkörperflug-zeugs wird erstmalig hinsichtlich der Flugmechanik und Flugregelung untersucht. In einer Flugleistungsbetrachtung wird das Flugzeugkonzept genau analysiert und die Vorteile hinsichtlich der Biegemomente und der Flugleistungen klar herausgestellt. Die Grenzen des Einsatzes im Flugbetrieb werden mithilfe aerodynamischer Optimalpunkte aufgezeigt. über die Lager an den Flügelspitzen, die eine relative Roll- und Nickbewegung der Flugzeuge untereinander ermöglichen, ergeben sich durch die Einstellung unterschiedlicher Längslage- und Hängewinkel zusätzliche Freiheitsgerade im Entwurf. Die Verwendung unterschiedlicher Nicklagewinkel der einzelnen Flugzeuge reduziert beispielsweise den induzierten Widerstand weiter und steigert die Flugleistung. Durch die symmetrische, entlang der Spannweite jedoch nicht homogene Auftriebsverteilung ist auch eine laterale Trimmung der einzelnen Flugzeuge in der Formation notwendig. Hier stellt die Arbeit eine neuartige Möglichkeit vor, um diese Trimmung ohne zusätzlichen parasitären Widerstand mittels Verschiebung der Batteriemasse entlang der Halbspannweite umzusetzen. Weiterhin wird ein vollständiges flugdynamisches Modell für über mechanische Lager verbundene Luftfahrzeuge aufgestellt und analysiert. Für diese Analyse wird eine hypothetische Torsions- und Biegefeder zwischen den Flugzeugen modelliert. Sind die Federsteifigkeiten hinreichend hoch, besitzt das flugdynamische Modell Eigenschaften, die einem elastischen Flugzeug entsprechen. Starrkörper- und elastische Eigenbewegungsformen sind in diesem Fall klar separiert. Bei immer weiterer Reduzierung, bis auf eine Federsteifigkeit von Null, kommt es zu Kopplungen zwischen den klassischen, flugmechanischen Eigenbewegungsformen und den Moden aus den zusätzlichen Freiheitsgraden. Dies stellt den Auslegungsfall für das Mehrkörperflugzeug dar. Hierbei verändert sich die Eigenstruktur (engl. eigenstructure) des Flugzeugs und normale, bei einem starren Flugzeug beobachtbare Bewegungen gegenüber dem inertialen Raum sind nicht mehr erkennbar. Zusätzlich zeigt die Strecke instabiles Verhalten. Basierend auf dem nichtlinearen, flugdynamischen Modell werden mit verschiedenen Methoden Regler entworfen, die die Regelstrecke stabilisieren und dem Flugzeug eine Streckenstruktur zuweisen, die derjenigen klassischer Flugzeuge ähnelt. Zudem soll durch die Regler eine vorgegebene Form des Flugzeugverbundes beibehalten werden, die Fahrt, der Längs- und Rolllagewinkel sollen geregelt und Störungen unterdrückt werden. Als Auslegungsverfahren werden Theorien der Zustandsregelungen im Zeitbereich (Eigenstrukturvorgabe) und Frequenzbereich (H-infinity loop-shaping) verwendet. Hierdurch wird durch die inneren Regelschleifen ein Verhalten des Mehrkörperflugzeugs erzielt, das dem eines starren Flugzeugs entspricht. Für die äußeren Regelschleifen werden anschließend klassische Konzepte von Autopiloten verwendet. Im Ergebnis ist eine Regelung des Flugweges über Grund des Mehrkörperflugzeugs und somit ein tatsächlicher Betrieb als HAPS möglich. Die Funktionalität des Reglers wird abschließend in nichtlinearen Simulationen mit vollständiger Flugdynamik verifiziert.

Observer-based sliding mode control is investigated for application to aircraft reconfigurable flight control. An overview of reconfigurable flight control is given, including a review of the current state-of-the-art within the subdisciplines of fault detection parameter identification, adaptive control schemes, and dynamic control allocation. Of the adaptive control methods reviewed, sliding mode control (SMC) appears promising due its property of invariance to matched uncertainty. An overview of SMC is given and its properties are demonstrated. Sliding mode methods, however, are difficult to implement because unmodeled parasitic dynamics cause immediate and severe instability. This presents a challenge for all practical applications with limited bandwidth actuators. One method to deal with parasitic dynamics is the use of an asymptotic observer. Observer-based SMC is investigated, and a method for selecting observer gains is offered. An additional method for shaping the feedback loop using a filter is also developed. It is shown that this SMC prefilter is equivalent to a form of model reference hedging. A complete design procedure is given which takes advantage of the sliding mode boundary layer to recast the SMC as a linear control law. Frequency domain loop shaping is then used to design the sliding manifold. Finally, three aircraft applications are demonstrated. An F-18/HARV is used to demonstrate SISO and MIMO designs. The third application is a linear six degree-of-freedom advanced tailless fighter model. The observer-based SMC is seen to provide excellent tracking with superior robustness to parameter changes and actuator failures.

The key attribute of a Fault Tolerant Control (FTC) system is its ability to maintain overall system stability and acceptable performance in the face of faults and failures within the feedback system. In this book Integral Sliding Mode (ISM) Control Allocation (CA) schemes for FTC are described, which have the potential to maintain close to nominal fault-free performance (for the entire system response), in the face of actuator faults and even complete failures of certain actuators. Broadly an ISM controller based around a model of the plant with the aim of creating a nonlinear fault tolerant feedback controller whose closed-loop performance is established during the design process. The second approach involves retro-fitting an ISM scheme to an existing feedback controller to introduce fault tolerance. This may be advantageous from an industrial perspective, because fault tolerance can be introduced without changing the existing control loops. A high fidelity benchmark model of a large transport aircraft is used to demonstrate the efficacy of the FTC schemes. In particular a scheme based on an LPV representation has been implemented and tested on a motion flight simulator.

This book offers a complete overview of fault-tolerant flight control techniques. Discussion covers the necessary equations for the modeling of small UAVs, a complete system based on extended Kalman filters, and a nonlinear flight control and guidance system.

These two volumes constitute the refereed proceedings of the First International Conference on Intelligent Robotics and Applications, ICIRA 2008, held in Wuhan, China, in October 2008. The 265 revised full papers presented were thoroughly reviewed and selected from 552 submissions; they are devoted but not limited to robot motion planning and manipulation; robot control; cognitive robotics; rehabilitation robotics; health care and artificial limb; robot learning; robot vision; human-machine interaction & coordination; mobile robotics; micro/nano mechanical systems; manufacturing automation; multi-axis surface machining; realworld applications.

Nonlinear problems in flight control have stimulated cooperation among engineers and scientists from a range of disciplines. Developments in computer technology allowed for numerical solutions of nonlinear control problems, while industrial recognition and applications of nonlinear mathematical models in solving technological problems is increasing. The aim of the book Advances in Flight Control Systems is to bring together reputable researchers from different countries in order to provide a comprehensive coverage of advanced and modern topics in flight control not yet reflected by other books. This product comprises 14 contributions submitted by 38 authors from 11 different countries and areas. It covers most of the currents main streams of flight control researches, ranging from adaptive flight control mechanism, fault tolerant flight control, acceleration based flight control, helicopter flight control, comparison of flight control systems and fundamentals. According to these themes the contributions are grouped in six categories, corresponding to six parts of the book.

The forces and moments produced by a vehicle's aerodynamic control surfaces are often nonlinear functions of control surface deflection. This phenomenon limits the accuracy of state-of-the-art control allocation algorithms since all of the approaches are based on the assumption that the control variable rates are linear functions of the surface deflections and that control variable rate increments are not produced for zero deflections. The errors introduced by this assumption are currently mitigated by the robustness resulting from feedback control laws. A method for improving the performance of the feedback control/control allocation system is presented that directly attacks the inaccuracies introduced by these linear assumptions.

With the extraordinary growth of Unmanned Aerial Vehicles (UAV) in research, military, and commercial contexts, there has been a need for a reference that provides a comprehensive look at the latest research in the area. Filling this void, Smart Autonomous Aircraft: Flight Control and Planning for UAV introduces the advanced methods of flight contr