Micro-power domestic organic Rankine cycle (ORC) systems and the selection of the expander and the working fluid are presented, analyzed thoroughly, and numerically evaluated. A promising decentralized hybrid PV-SOFC system is investigated for providing useful energy supply to commercial buildings, capable of power and heat generation at a lower cost. A hybrid solar-combined cycle power plant integrated with a packed-bed thermal energy storage system with a novel recycling configuration enables robust control of collector temperature and net power during times of high solar activity. An automated hybrid (solar and biomass) power plant for thermal energy production for indoor space heating loads coverage is presented. A comprehensive and up-to-date literature review is presented of non-iterative methods for the extraction of the single diode model parameters of photovoltaic modules. A prototype custom built two-speed gearbox with a single stage transmission electric vehicle achieves significant reductions in the overall energy consumption. Two new fuzzy models are presented of high concentrator photovoltaics using the high-accuracy Takagi–Sugeno–Kang approach and the ease of interpreting the Mamdani linguistic rules. Finally, the impact of plug-in hybrid electric vehicles (PHEVs) in the primary frequency regulation is studied and the effects of PHEVs in non-interconnected isolated power systems with significant renewable energy source (RES) penetration are demonstrated through simulations of the isolated power system of Cyprus Island.

With the widespread availability of high-speed, high-capacity microprocessors and microcomputers with high-speed communication ability, and sophisticated energy analytics software, the technology to support deployment of automated diagnostics is now available, and the opportunity to apply automated fault detection and diagnostics to every system and piece of equipment in a facility, as well as for whole buildings, is imminent. The purpose of this book is to share information with a broad audience on the state of automated fault detection and diagnostics for buildings applications, the benefits of those applications, emerging diagnostic technology, examples of field deployments, the relationship to codes and standards, automated diagnostic tools presently available, guidance on how to use automated diagnostics, and related issues.

Discusses the application of mathematical and engineering tools for modeling, simulation and control oriented for energy systems, power electronics and renewable energy This book builds on the background knowledge of electrical circuits, control of dc/dc converters and inverters, energy conversion and power electronics. The book shows readers how to apply computational methods for multi-domain simulation of energy systems and power electronics engineering problems. Each chapter has a brief introduction on the theoretical background, a description of the problems to be solved, and objectives to be achieved. Block diagrams, electrical circuits, mathematical analysis or computer code are covered. Each chapter concludes with discussions on what should be learned, suggestions for further studies and even some experimental work. Discusses the mathematical formulation of system equations for energy systems and power electronics aiming state-space and circuit oriented simulations Studies the interactions between MATLAB and Simulink models and functions with real-world implementation using microprocessors and microcontrollers Presents numerical integration techniques, transfer-function modeling, harmonic analysis and power quality performance assessment Examines existing software such as, MATLAB/Simulink, Power Systems Toolbox and PSIM to simulate power electronic circuits including the use of renewable energy sources such as wind and solar sources The simulation files are available for readers who register with the Google Group: power-electronics-interfacing-energy-conversion-systems@googlegroups.com. After your registration you will receive information in how to access the simulation files, the Google Group can also be used to communicate with other registered readers of this book.

eWork and eBusiness in Architecture, Engineering and Construction 2018 collects the papers presented at the 12th European Conference on Product and Process Modelling (ECPPM 2018, Copenhagen, 12-14 September 2018). The contributions cover complementary thematic areas that hold great promise towards the advancement of research and technological development in the modelling of complex engineering systems, encompassing a substantial number of high quality contributions on a large spectrum of topics pertaining to ICT deployment instances in AEC/FM, including: • Information and Knowledge Management • Construction Management • Description Logics and Ontology Application in AEC • Risk Management • 5D/nD Modelling, Simulation and Augmented Reality • Infrastructure Condition Assessment • Standardization of Data Structures • Regulatory and Legal Aspects • Multi-Model and distributed Data Management • System Identification • Industrilized Production, Smart Products and Services • Interoperability • Smart Cities • Sustainable Buildings and Urban Environments • Collaboration and Teamwork • BIM Implementation and Deployment • Building Performance Simulation • Intelligent Catalogues and Services eWork and eBusiness in Architecture, Engineering and Construction 2018 represents a rich and comprehensive resource for academics and researchers working in the interdisciplinary areas of information technology applications in architecture, engineering and construction. In the last two decades, the biennial ECPPM (European Conference on Product and Process Modelling) conference series, as the oldest BIM conference, has provided a unique platform for the presentation and discussion of the most recent advances with regard to the ICT (Information and Communication Technology) applications in the AEC/FM (Architecture, Engineering, Construction and Facilities Management) domains.

This book provides a platform for scientists and engineers to comprehend the technologies of solar wind hybrid renewable energy systems and their applications. It describes the thermodynamic analysis of wind energy systems, and advanced monitoring, modeling, simulation, and control of wind turbines. Based on recent hybrid technologies considering wind and solar energy systems, this book also covers modeling, design, and optimization of wind solar energy systems in conjunction with grid-connected distribution energy management systems comprising wind photovoltaic (PV) models. In addition, solar thermochemical fuel generation topology and evaluation of PV wind hybrid energy for a small island are also included in this book. Since energy storage plays a vital role in renewable energy systems, another salient part of this book addresses the methodology for sizing hybrid battery-backed power generation systems in off-grid connected locations. Furthermore, the book proposes solutions for sustainable rural development via passive solar housing schemes, and the impacts of renewable energies in general, considering social, economic, and environmental factors. Because this book proposes solutions based on recent challenges in the area of hybrid renewable technologies, it is hoped that it will serve as a useful reference to readers who would like to be acquainted with new strategies of control and advanced technology regarding wind solar hybrid systems

Quality attributes, such as performance or reliability, are crucial for the success of a software system and largely influenced by the software architecture. Their quantitative prediction supports systematic, goal-oriented software design and forms a base of an engineering approach to software design. This thesis proposes a method and tool to automatically improve component-based software architecture (CBA) models based on such quantitative quality prediction techniques.

This book is thematically positioned at the intersections of Urban Design, Architecture, Civil Engineering and Computer Science, and it has the goal to provide specialists coming from respective fields a multi-angle overview of state-of-the-art work currently being carried out. It addresses both newcomers who wish to obtain more knowledge about this growing area of interest, as well as established researchers and practitioners who want to keep up to date. In terms of organization, the volume starts out with chapters looking at the domain at a wide-angle and then moves focus towards technical viewpoints and approaches.