Most schools using Autodesk software first introduce students to the 2D features of AutoCAD and then go on to its 3D Capabilities. Inventor is usually reserved for the second or third course or for a solid modeling course. However, another possibility is to introduce students first to solid modeling using Inventor and then to introduce AutoCAD as a 2D product. Students learn to create solid models using Inventor and then learn how to create working drawings of their 3D models using AutoCAD. This approach provides students with a strong understanding of the process used to create models and drawing in the industry. This book contains a series of tutorial style lessons designed to introduce Autodesk Inventor, AutoCAD, solid modeling, and parametric modeling. It uses a hands-on, exercise-intensive approach to all the import parametric modeling techniques and concepts. The lessons guide the user from constructing basic shapes to building intelligent mechanical designs, creating multi-view drawings and assembly models. Introduction to Inventor 2012 and AutoCAD 2012 consists of ten chapters from Parametric Modeling using Inventor 2012 and six chapters from AutoCAD 2012 Tutorial-First Level: 2D Fundamentals. This book is used by Ohio State in their freshman engineering program.

Tools for Design is intended to provide the user with an overview of computer aided design using two popular CAD software packages from Autodesk: AutoCAD and Autodesk Inventor. This book explores the strengths of each package and show how they can be used in design, both separately and in combination with each other. What you'll learn How to create and dimension 2D multiview drawings using AutoCAD How to freehand sketch using axonometric, oblique and perspective projection techniques How to create 3D parametric models and 2D multiview drawings using Autodesk Inventor How to reuse design information between AutoCAD and Autodesk Inventor How to combine parts into assemblies including assembly modeling with a LEGO® MINDSTORMS® Education Base Set with TETRIX® kit How to perform basic finite element stress analysis using Inventor Stress Analysis Module

The main purpose of this book is to provide civil engineering students with a clear presentation of the theory of engineering graphics and the use of AutoCAD 2012. Each chapter starts with the chapter objectives followed by the introduction. The contents of each chapter are organized into well-defined sections that contain step-by-step instructions to carry out the AutoCAD commands. The drawings shown in this book are created using AutoCAD 2012 and Paint software. Several improvements have been made to this edition. An index has been added and one of the chapters has been partitioned into two chapters, hence the twenty two chapters. Chapter chapter 19, 'Suggested In-Class Activities', has been improved and provides in-class activities (or labs). For some of the initial ICAs, it explains the drawing with the help of step-by-step instruction. Also, new problems have been added to the homework’s chapter. Furthermore, the contents and the drawings of every chapter are improved. Each chapter starts with the chapter objectives followed by the introduction. The bulleted objectives provide a general overview of the material covered. The contents of each chapter are organized into well-defined sections that contain detailed step-by-step instructions with graphical illustrations to carry out the AutoCAD commands. This book has been categorized and ordered into nine parts: Introduction to AutoCAD 2012 Use of AutoCAD in land survey data plotting The use of AutoCAD in hydrology Transportation engineering and AutoCAD AutoCAD and architecture technology Introduction to working drawing Suggested drawing problems Bibliography Index

Tools for Design is intended to provide the user with an overview of computer aided design using two popular CAD software packages from Autodesk: AutoCAD and Autodesk Inventor. This book explores the strengths of each package and show how they can be used in design, both separately and in combination with each other. What you'll learn How to create and dimension 2D multiview drawings using AutoCAD How to freehand sketch using axonometric, oblique and perspective projection techniques How to create 3D parametric models and 2D multiview drawings using Autodesk Inventor How to reuse design information between AutoCAD and Autodesk Inventor How to combine parts into assemblies including assembly modeling with a VEX Robot Kit How to perform basic finite element stress analysis using Inventor Stress Analysis Module

Tools for Design is intended to provide the user with an overview of computer aided design using two popular CAD software packages from Autodesk: AutoCAD and Autodesk Inventor. This book explores the strengths of each package and show how they can be used in design, both separately and in combination with each other. What you'll learn How to create and dimension 2D multiview drawings using AutoCAD How to freehand sketch using axonometric, oblique and perspective projection techniques How to create 3D parametric models and 2D multiview drawings using Autodesk Inventor How to reuse design information between AutoCAD and Autodesk Inventor How to combine parts into assemblies including assembly modeling with a FischerTechnik Robo Kit How to perform basic finite element stress analysis using Inventor Stress Analysis Module

AutoCAD LT 2012 contains a series of ten tutorial style lessons designed to introduce students and professionals to AutoCAD LT 2012 and the aspects of computer aided drafting. The lessons proceed in a pedagogical fashion to guide you from constructing basic shapes to making multiview drawings and building three dimensional wireframe models. The new improvements and key enhancements of AutoCAD LT 2012 are incorporated into the lessons. This book takes a hands-on, exercise-intensive approach to all the important CAD techniques and concepts. The basic premise of this book is that the more designs you create using AutoCAD LT 2012, the better you learn the software. With this in mind each lesson introduces a new set of commands and concepts, building on previous lessons. AutoCAD LT 2012 Tutorial will establish a good basis for exploring and growing in the exciting field of computer aided engineering.

The primary goal of AutoCAD 2012 Tutorial - First Level: 2D Fundamentals is to introduce the aspects of Computer Aided Design and Drafting (CADD). This text is intended to be used as a training guide for students and professionals. This text covers AutoCAD 2012 and the lessons proceed in a pedagogical fashion to guide you from constructing basic shapes to making multiview drawings. The lessons are further reinforced by the video presentations found on the enclosed multimedia DVD. This textbook contains a series of eleven tutorial style lessons designed to introduce beginning CAD users to AutoCAD 2012. It takes a hands-on, exercise-intensive approach to all the important 2D CAD techniques and concepts. This text is also helpful to AutoCAD users upgrading from a previous release of the software. The new improvements and key enhancements of the software are incorporated into the lessons. The 2D-CAD techniques and concepts discussed in this text are also designed to serve as the foundation to the more advanced parametric feature-based CAD packages such as Autodesk Inventor. The basic premise of this book is that the more designs you create using AutoCAD 2012, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book is intended to help readers establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.

Parametric Modeling with Autodesk Inventor 2012 contains a series of sixteen tutorial style lessons designed to introduce Autodesk Inventor, solid modeling, and parametric modeling. It uses a hands-on, exercise-intensive approach to all the import parametric modeling techniques and concepts. The lessons guide the user from constructing basic shapes to building intelligent mechanical designs, creating multi-view drawings and assembly models. Other featured topics include sheet metal design, motion analysis, 2D design reuse, collision and contact, stress analysis and the Autodesk Inventor 2012 Certified Associate Examination.

The unit of competency covers the skills and knowledge required to apply functions of computer-aided design (CAD) software programs that are typically used in the production of detail drawings and covers competent use of a CAD program to perform basic drawing tasks used in the development of detail drawings. Drawings may include plans, diagrams, charts, circuits, systems or schematics. Topics: 1 Types of CAD Software: 2 Template Drawings and Options: 3 Text Styles: 4 Dimension Styles: 5 Blocks, WBlocks, X-Refs & Insert: 6 Define & Insert Attributes: 7 Extract Attributes: 8 Polylines, Splines & Donuts: 9 Multi View Drawings: 10 Isometric Drawings: 11 Dimensioning Isometric Drawings: 12 Advanced Dimensioning Techniques: 186 Pages A CD containing drawing templates is available for $10 plus postage by contacting BlackLine Design at blakline@bigpond.net.au

Tools for Design is intended to provide the user with an overview of computer aided design using two popular CAD software packages from Autodesk: AutoCAD and Autodesk Inventor. This book explores the strengths of each package and show how they can be used in design, both separately and in combination with each other. What you'll learn How to create and dimension 2D multiview drawings using AutoCAD How to freehand sketch using axonometric, oblique and perspective projection techniques How to create 3D parametric models and 2D multiview drawings using Autodesk Inventor How to reuse design information between AutoCAD and Autodesk Inventor How to combine parts into assemblies including assembly modeling with a LEGO® MINDSTORMS® Education Base Set with TETRIX® kit and a VEX Robot Kit How to perform basic finite element stress analysis using Inventor Stress Analysis Module