System Design; Digital to Analog Converters; Sensors; Time-Based Measurements; Output Control Methods; Solenoids, Relays, and Other Analog Outputs; Motors; EMI; High Precision Applications; Standard Interfaces.

Analog Interfacing to Embedded Microprocessors addresses the technologies and methods used in interfacing analog devices to microprocessors, providing in-depth coverage of practical control applications, op amp examples, and much more. A companion to the author's popular Embedded Microprocessor Systems: Real World Design, this new embedded systems book focuses on measurement and control of analog quantities in embedded systems that are required to interface to the real world. At a time when modern electronic systems are increasingly digital, a comprehensive source on interfacing the real world to microprocessors should prove invaluable to embedded systems engineers, students, technicians, and hobbyists. Anyone involved in connecting the analog environment to their digital machines, or troubleshooting such connections will find this book especially useful. Stuart Ball is also the author of Debugging Embedded Microprocessor Systems, both published by Newnes. Additionally, Stuart has written articles for periodicals such as Circuit Cellar INK, Byte, and Modern Electronics. Provides hard-to-find information on interfacing analog devices and technologies to the purely digital world of embedded microprocessors. Gives the reader the insight and perspective of a real embedded systems design engineer, including tips that only a hands-on professional would know. Covers important considerations for both hardware and software systems when linking analog and digital devices.

Analog Interfacing to Embedded Microprocessors addresses the technologies and methods used in interfacing analog devices to microprocessors, providing in-depth coverage of practical control applications, op amp examples, and much more. A companion to the author's popular Embedded Microprocessor Systems: Real World Design, this new embedded systems book focuses on measurement and control of analog quantities in embedded systems that are required to interface to the real world. At a time when modern electronic systems are increasingly digital, a comprehensive source on interfacing the real world to microprocessors should prove invaluable to embedded systems engineers, students, technicians, and hobbyists. Anyone involved in connecting the analog environment to their digital machines, or troubleshooting such connections will find this book especially useful. Stuart Ball is also the author of Debugging Embedded Microprocessor Systems, both published by Newnes. Additionally, Stuart has written articles for periodicals such as Circuit Cellar INK, Byte, and Modern Electronics. Provides hard-to-find information on interfacing analog devices and technologies to the purely digital world of embedded microprocessors Gives the reader the insight and perspective of a real embedded systems design engineer, including tips that only a hands-on professional would know Covers important considerations for both hardware and software systems when linking analog and digital devices.

The vast majority of computers in use today are encapsulated within other systems. In contrast to general-purpose computers that run an endless selection of software, these embedded computers are often programmed for a very specific, low-level and often mundane purpose. Low-end microcontrollers, costing as little as one dollar, are often employed by engineers in designs that utilize only a small fraction of the processing capability of the device because it is either more cost-effective than selecting an application-specific part or because programmability offers custom functionality not otherwise available. Embedded Systems Interfacing for Engineers using the Freescale HCS08 Microcontroller is a two-part book intended to provide an introduction to hardware and software interfacing for engineers. Building from a comprehensive introduction of fundamental computing concepts, the book suitable for a first course in computer organization for electrical or computer engineering students with a minimal background in digital logic and programming. In addition, this book can be valuable as a reference for engineers new to the Freescale HCS08 family of microcontrollers. The HCS08 processor architecture used in the book is relatively simple to learn, powerful enough to apply towards a wide-range of interfacing tasks, and accommodates breadboard prototyping in a laboratory using freely available and low-cost tools. In Part II: Digital and Analog Hardware Interfacing, hardware and software interfacing concepts are introduced. The emphasis of this work is on good hardware and software engineering design principles. Device drivers are developed illustrating the use of general-purpose and special-purpose digital I/O interfaces, analog interfaces, serial interfaces and real-time I/O processing. The hardware side of each interface is described and electrical specifications and related issues are considered. The first part of the book provides the programming skills necessary to implement the software in this part. Table of Contents: Introduction to the MC9S08QG4/8 Hardware / Analog Input / Serial Communication / Real-Time I/O Processing

Appropriate for undergraduate and beginning graduate level courses on embedded systems or microprocessor based systems design in computer engineering, electrical engineering, and computer science. The basic structure, operation, and design of embedded systems is presented in a stepwise fashion. A balanced treatment of both hardware and software is provided. The Intel 80C188EB microprocessor is used as the instructional example. Hardware is covered starting from the component level. Software development focuses on assembly language. The only background required is an introductory course in digital systems design.

The vast majority of computers in use today are encapsulated within other systems. In contrast to general-purpose computers that run an endless selection of software, these embedded computers are often programmed for a very specific, low-level and often mundane purpose. Low-end microcontrollers, costing as little as one dollar, are often employed by engineers in designs that utilize only a small fraction of the processing capability of the device because it is either more cost-effective than selecting an application-specific part or because programmability offers custom functionality not otherwise available. Embedded Systems Interfacing for Engineers using the Freescale HCS08 Microcontroller is a two-part book intended to provide an introduction to hardware and software interfacing for engineers. Building from a comprehensive introduction of fundamental computing concepts, the book suitable for a first course in computer organization for electrical or computer engineering students with a minimal background in digital logic and programming. In addition, this book can be valuable as a reference for engineers new to the Freescale HCS08 family of microcontrollers. The HCS08 processor architecture used in the book is relatively simple to learn, powerful enough to apply towards a wide-range of interfacing tasks, and accommodates breadboard prototyping in a laboratory using freely available and low-cost tools. In Part II: Digital and Analog Hardware Interfacing, hardware and software interfacing concepts are introduced. The emphasis of this work is on good hardware and software engineering design principles. Device drivers are developed illustrating the use of general-purpose and special-purpose digital I/O interfaces, analog interfaces, serial interfaces and real-time I/O processing. The hardware side of each interface is described and electrical specifications and related issues are considered. The first part of the book provides the programming skills necessary to implement the software in this part. Table of Contents: Introduction to the MC9S08QG4/8 Hardware / Analog Input / Serial Communication / Real-Time I/O Processing

This book presents the use of a microprocessor-based digital system in our daily life. Its bottom-up approach ensures that all the basic building blocks are covered before the development of a real-life system. The ultimate goal of the book is to equip students with all the fundamental building blocks as well as their integration, allowing them to implement the applications they have dreamed up with minimum effort.

This textbook for courses in Embedded Systems introduces students to necessary concepts, through a hands-on approach. It gives a great introduction to FPGA-based microprocessor system design using state-of-the-art boards, tools, and microprocessors from Altera/Intel® and Xilinx®. HDL-based designs (soft-core), parameterized cores (Nios II and MicroBlaze), and ARM Cortex-A9 design are discussed, compared and explored using many hand-on designs projects. Custom IP for HDMI coder, Floating-point operations, and FFT bit-swap are developed, implemented, tested and speed-up is measured. Downloadable files include all design examples such as basic processor synthesizable code for Xilinx and Altera tools for PicoBlaze, MicroBlaze, Nios II and ARMv7 architectures in VHDL and Verilog code, as well as the custom IP projects. Each Chapter has a substantial number of short quiz questions, exercises, and challenging projects. Explains soft, parameterized, and hard core systems design tradeoffs; Demonstrates design of popular KCPSM6 8 Bit microprocessor step-by-step; Discusses the 32 Bit ARM Cortex-A9 and a basic processor is synthesized; Covers design flows for both FPGA Market leaders Nios II Altera/Intel and MicroBlaze Xilinx system; Describes Compiler-Compiler Tool development; Includes a substantial number of Homework’s and FPGA exercises and design projects in each chapter.

This textbook provides practicing scientists and engineers an advanced treatment of the Atmel AVR microcontroller. This book is intended as a follow-on to a previously published book, titled Atmel AVR Microcontroller Primer: Programming and Interfacing. Some of the content from this earlier text is retained for completeness. This book will emphasize advanced programming and interfacing skills. We focus on system level design consisting of several interacting microcontroller subsystems. The first chapter discusses the system design process. Our approach is to provide the skills to quickly get up to speed to operate the internationally popular Atmel AVR microcontroller line by developing systems level design skills. We use the Atmel ATmega164 as a representative sample of the AVR line. The knowledge you gain on this microcontroller can be easily translated to every other microcontroller in the AVR line. In succeeding chapters, we cover the main subsystems aboard the microcontroller, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying software for the subsystem. We then provide advanced examples exercising some of the features discussed. In all examples, we use the C programming language. The code provided can be readily adapted to the wide variety of compilers available for the Atmel AVR microcontroller line. We also include a chapter describing how to interface the microcontroller to a wide variety of input and output devices. The book concludes with several detailed system level design examples employing the Atmel AVR microcontroller. Table of Contents: Embedded Systems Design / Atmel AVR Architecture Overview / Serial Communication Subsystem / Analog to Digital Conversion (ADC) / Interrupt Subsystem / Timing Subsystem / Atmel AVR Operating Parameters and Interfacing / System Level Design

Mixed-Signal Embedded Microcontrollers are commonly used in integrating analog components needed to control non-digital electronic systems. They are used in automatically controlled devices and products, such as automobile engine control systems, wireless remote controllers, office machines, home appliances, power tools, and toys. Microcontrollers make it economical to digitally control even more devices and processes by reducing the size and cost, compared to a design that uses a separate microprocessor, memory, and input/output devices. In many undergraduate and post-graduate courses, teaching of mixed-signal microcontrollers and their use for project work has become compulsory. Students face a lot of difficulties when they have to interface a microcontroller with the electronics they deal with. This book addresses some issues of interfacing the microcontrollers and describes some project implementations with the Silicon Lab C8051F020 mixed–signal microcontroller. The intended readers are college and university students specializing in electronics, computer systems engineering, electrical and electronics engineering; researchers involved with electronics based system, practitioners, technicians and in general anybody interested in microcontrollers based projects.