Photoactive nanomaterials have been receiving increasing attention due to their potential application in the light-driven degradation of water and gas-phase pollutants. However, to exploit the great potential of photoactive materials and access their properties requires fine-tuning of their size/shape-dependent chemical–physical properties, and on the ability to integrate them in photoreactors or to deposit them onto large surfaces. Therefore, the synthetic approach as well as post-synthesis manipulation could strongly affect the final photocatalytic properties of the nanomaterial. The aim of the present Special Issue is to report on the most recent progress towards the application of photoactive nanomaterials and nanomaterial-based coatings in pollutant degradation, paying particular attention to cases close to real application: scalable synthetic approaches to nanocatalysts, preparation of nanocatalyst-based coatings, degradation of real pollutants and bacterial inactivation, and application in building materials.

Photoactive nanomaterials have been receiving increasing attention due to their potential application in the light-driven degradation of water and gas-phase pollutants. However, to exploit the great potential of photoactive materials and access their properties requires fine-tuning of their size/shape-dependent chemical-physical properties, and on the ability to integrate them in photoreactors or to deposit them onto large surfaces. Therefore, the synthetic approach as well as post-synthesis manipulation could strongly affect the final photocatalytic properties of the nanomaterial. The aim of the present Special Issue is to report on the most recent progress towards the application of photoactive nanomaterials and nanomaterial-based coatings in pollutant degradation, paying particular attention to cases close to real application: scalable synthetic approaches to nanocatalysts, preparation of nanocatalyst-based coatings, degradation of real pollutants and bacterial inactivation, and application in building materials.

Nano-Materials as Photocatalysts for Degradation of Environmental Pollutants: Challenges and Possibilities contains both practical and theoretical aspects of environmental management using the processes of photodegradation and various heterogeneous catalysts. The book's main focus is on the degradation of harmful pollutants, such as petrochemicals, crude oils, dyes, xenobiotic pharmaceutical waste, endocrine disrupting compounds, and other common pollutants. Chapters incorporate both theoretical and practical aspects. This book is useful for undergraduate or university students, teachers and researchers, especially those working in areas of photocatalysis through heterogeneous catalysts. The primary audience for this book includes Chemical Engineers, Environmental Engineers and scientists, scholars working on the management of hazardous waste, scientists working in fields of materials science, and Civil Engineers working on wastewater treatment. Reviews recent trends in the photodegradation of organic pollutants Offers a bibliometric analysis of photocatalysis for environmental abatement Includes many degradation mechanisms of organic pollutants using various catalysts Includes examples on the degradation of organic pollutants from various sources, e.g., pharmaceuticals, dyes, pesticides, etc. Discusses the effect of nanocatalysts on soil, plants and the ecosystem

Photocatalytic nanomaterials have a great potential in such applications as reduction of carbon dioxide and degradation of various pollutants. They are equally important in the production and storage of energy, e.g. in the conversion of solar energy to electricity, and the production of hydrogen in photoelectrochemical cells. Research on synthesis, characterization and specific applications is reported for titanium oxide and a number of other promising catalysts, such as silver phosphate, cerium oxide, zinc oxide and zinc sulfide.

Green nanomaterials are classed as nanomaterials with no environmentally harmful, toxic, properties. The photocatalysis of nanomaterials involves photo-conduction value in efficient removal/degradation of noxious pollutants. Green nanotechnology has objectives for the development of products and processes which are environmentally friendly, economically sustainable, safe, energy-efficient, and produce little waste or emissions. Such products and processes are based on renewable materials and/or have a low net impact on the environment. Green functionalized nanomaterials, formed by a combination of nanomaterials with natural materials or are derived through a green source, are the new trends in the remediation of pollutants in environmental industries. This has the effect of making photoactive nanomaterials work under UV/sunlight radiation in order to produce reactive radical species that rapidly remove pollutants by redox mechanism. Green Functionalized Nanomaterials for Environmental Applications focuses on recent developments in the area of fabrication of green nanomaterials and their properties. It also looks at ways of lowering the risk of exposure of green functionalized nanomaterials. This needs to be pursued in the future for investigating and assessing health risks, which may be due to exposure to green nanomaterials. It is an important reference source for all those seeking to improve their understanding of how green functionalized nanomaterials are being used in a range of environmental applications, as well as considering potential toxicity implications. - Highlights innovative industrial technologies for green functionalized nanomaterials - Covers major fabrication techniques for sustainable functionalized nanomaterials - Shows how sustainable functionalized nanomaterials are being developed for commercial applications

The book compiles scientific articles describing advances in nanomaterial synthesis and their application in water remediation. The publications treat diverse problems such as dye degradation, heavy metal ion, as well as radioactive element capture and sequestration. There are 10 original research articles and one review article. The latter proposes graphene/CNT and Prussian blue nanocomposites for radioactive 137-cesium extraction from aqueous media. All reports thoroughly characterize the nanomaterials post-synthesis and describe their catalytic, photocatalytic, or ion exchange activities in contaminated water. The dyes studied in the collection are azo dyes, i.e. methylene blue and orange, rhodamine B, phenolic dyes viz. bromophenol blue, and other dyes with sulfonyl groups. Extraction of radioactive elements, including cationic 137Cs+ and anionic 125I−, is also investigated. The omnipresence of ZnO nanoparticles in everyday products and their effects in wastewater are also evaluated. Layered double hydroxide are capable of capturing Ag ions, which then has a catalytic effect on dye degradation. The nanomaterials considered are varied, viz., graphene, CNT, Prussian blue, nanoporous carbon, layered double hydroxides, magnetite, ferrites, organic powders, polymer membranes, bacteria, and inorganic nanomaterials such as MnO and Ag. The book targets an interdisciplinary readership.

A comprehensive volume on photocatalytic functional materials for environmental remediation As the need for removing large amounts of pollution and contamination in air, soil, and water grows, emerging technologies in the field of environmental remediation are of increasing importance. The use of photocatalysis—a green technology with enormous potential to resolve the issues related to environmental pollution—breaks down toxic organic compounds to mineralized products such as carbon dioxide and water. Due to their high performance, ease of fabrication, long-term stability, and low manufacturing costs, photofunctional materials constructed from nanocomposite materials hold great potential for environmental remediation. Photocatalytic Functional Materials for Environmental Remediation examines the development of high performance photofunctional materials for the treatment of environmental pollutants. This timely volume assembles and reviews a broad range of ideas from leading experts in fields of chemistry, physics, nanotechnology, materials science, and engineering. Precise, up-to-date chapters cover both the fundamentals and applications of photocatalytic functional materials. Semiconductor-metal nanocomposites, layered double hydroxides, metal-organic frameworks, polymer nanocomposites, and other photofunctional materials are examined in applications such as carbon dioxide reduction and organic pollutant degradation. Providing interdisciplinary focus to green technology materials for the treatment of environmental pollutants, this important work: Provides comprehensive coverage of various photocatalytic materials for environmental remediation useful for researchers and developers Encompasses both fundamental concepts and applied technology in the field Focuses on novel design and application of photocatalytic materials used for the removal of environmental contaminates and pollution Offers in-depth examination of highly topical green-technology solutions Presents an interdisciplinary approach to environmental remediation Photocatalytic Functional Materials for Environmental Remediation is a vital resource for researchers, engineers, and graduate students in the multi-disciplinary areas of chemistry, physics, nanotechnology, environmental science, materials science, and engineering related to photocatalytic environmental remediation.

CUTTING-EDGE NANOTECHNOLOGY TECHNIQUES AND APPLICATIONS FOR ENVIRONMENTAL DECONTAMINATION Written by a team of global experts, Nanotechnology for Environmental Contamination covers the latest methods for using nanomaterials, processes, and tools to remediate toxin-contaminated water, air, soil, groundwater, and wastewater. This groundbreaking work discusses the use of nanotechnology to neutralize microbes, pesticides, heavy metals, industrial chemicals, chemical and biological warfare agents, and other toxic substances. In-depth details on the physics, chemistry, and technology of nanomaterials, nanostructures, and nanotechnology for decontamination are included in this authoritative resource. Preparation and application of inner skin hollow fiber nanoporous membrane Photocatalytic inactivation of water and air pollution Application of nano TiO, catalyst in wastewater treatment Photoelectrocatalytic degradation of organic contaminants at nanosemiconductor film electrodes under visible light irradiation Disinfection of microbes by nanoparticles Water disinfection and wastewater decontamination by solar photocatalysis using nanomaterials The role of nanotechnology for decontamination of chemical warfare agents Nanostructured bioassemblies for environmental bioremediation Reactive nanoparticles for the treatment of chlorinated dense nonaqueous phase liquids (DNAPL) in soil and groundwater Persistent pesticides: detection and control using nanotechnology Decontaminating chemical and biological warfare agents and related toxins with nanomaterials

This book report the advances in the synthesis of new nanomaterials for the remediation of natural waters, groundwaters, and wastewaters. The authors describe synthetic routes for the assembly of different nanomaterials for the removal of contaminants by adsorption, catalytic degradation, and antibacterial activity. The hazardous effects of nanomaterials in aquatic ecosystems are discussed. This book presents the trends in the development of advanced technologies available in the market based on nanomaterials for more efficient water remediation. The authors also discuss sustainable management of water resources according to the new technologies developed and the improved efficiency of remediation processes.

Providing up-to-date coverage of green nanomaterials and systems, this book provides comprehensive information on nanostructured materials, including their applications in energy and environmental sciences. The book focusses on photo-active nanostructured materials, from the basic understanding of solar energy activation to their sustainable preparation and applications in environmental remediation and fuel production from biomass and carbon dioxide. It also examines the health and environmental impacts of photo-catalyst nanomaterials. This book is an important reference for researchers and industrial chemists working in the fields of energy and environmental remediation.