This timely text integrates disciplines such as materials science, polymer chemistry, plant science, chemical engineering, and nanotechnology to provide comprehensive coverage of the state of the art in bio-based composite materials. It discusses the raw materials used in bio-based composites, basic design principles, properties, applications, a

Since synthetic plastics derived from fossil resources are mostly non-biodegradable, many academic and industrial researchers have shifted their attention toward bio-based materials, which are more eco-friendly.Bio-Based Composites for High-Performance Materials: From Strategy to Industrial Application provides an overview of the state-of-art in bi

Explore the world of biocomposites with this one-stop resource edited by four international leaders in the field Bio-based Composites: Characterization, Properties, and Applications delivers a comprehensive treatment of all known characterization methods, properties, and industry applications of bio-based composites materials. This unique, one-stop resource covers all major developments in the field from the last decade of research into this environmentally beneficial area. The internationally recognized editors have selected resources that represent advances in the mechanical, thermal, tribological, and water sorption properties of bio-based composites, and cover new areas of research in physico-chemical analysis, flame retardancy, failure mechanisms, lifecycle assessment, and modeling of bio-based composites. The low weight, low cost, excellent thermal recyclability, and biodegradability of bio-based composites make them ideal candidates to replace engineered plastic products derived from fossil fuel. This book provides its readers with the knowledge they’ll require to understand a new class of materials increasingly being used in the automotive and packaging industries, aerospace, the military, and construction. It also includes: An extended discussion of the environmental impact of bio-based composites using a lice cycle methodology A review of forecasts of natural fiber reinforced polymeric composites and its degradability concerns An analysis of the physical and mechanical properties of a bio-based composite with sisal powder A comprehensive treatment of the mechanical, thermal, tribological, and dielectric properties of bio-based composites A review of processing methods for the manufacture of bio-based composites Perfect for materials scientists in private industry, government laboratories, or engaged in academic research, Bio-Based Composites will also earn a place in the libraries of industrial and manufacturing engineers who seek a better understanding of the beneficial industrial applications of biocomposites in industries ranging from automobiles to packaging.

Explore the world of biocomposites with this one-stop resource edited by four international leaders in the field Biobased Composites: Processing, Characterization, Properties, and Applications delivers a comprehensive treatment of all known characterization methods, properties, and industry applications of biobased composites materials. This unique, one-stop resource covers all major developments in the field from the last decade of research into this environmentally beneficial area. The internationally recognized editors have selected resources that represent advances in the mechanical, thermal, tribological, and water sorption properties of biobased composites, and cover new areas of research in physico-chemical analysis, flame retardancy, failure mechanisms, lifecycle assessment, and modeling of biobased composites. The low weight, low cost, excellent thermal recyclability, and biodegradability of biobased composites make them ideal candidates to replace engineered plastic products derived from fossil fuel. This book provides its readers with the knowledge they'll require to understand a new class of materials increasingly being used in the automotive and packaging industries, aerospace, the military, and construction. It also includes: An extended discussion of the environmental impact of biobased composites using a life cycle methodology A review of forecasts of natural fiber reinforced polymeric composites and its degradability concerns An analysis of the physical and mechanical properties of a biobased composite with sisal powder A comprehensive treatment of the mechanical, thermal, tribological, and dielectric properties of biobased composites A review of processing methods for the manufacture of biobased composites Perfect for materials scientists in private industry, government laboratories, or engaged in academic research, Biobased Composites will also earn a place in the libraries of industrial and manufacturing engineers who seek a better understanding of the beneficial industrial applications of biocomposites in industries ranging from automobiles to packaging.

Biocomposites – Bio-based Fibres and Polymers from Renewable Resources: Processing, Performance, Durability and Applications provides a systematic and comprehensive review of recent developments in this important area of research. Chapters discuss novel techniques for processing and the characterization of biocomposites derived from renewable resources, focusing on durability, strength prediction, aging methods and performance evaluation. Future trends, directions and opportunities are also addressed. Readers will find an up-to-date summary of recent research findings that have been conducted on biocomposites, making this an essential reference resource for academic and industrial researchers and anyone working in the development of innovative materials from renewable resources. - Provides wide coverage of processing methods, mechanical performance and industrial applications - Emphasizes durability assessment of natural fiber composites in different environments

The presented work is a part of the ongoing effort on the development of high performance bio-based composites with enhanced durability, under static and dynamic mechanical loading including the exposure to elevated humidity. The impact of relative humidity on the performance of cellulosic fibers (natural and regenerated), bio-based resins and their composites was studied. The material performance was rated against the data for glass fiber epoxy, as the reference. The comparison of water absorption results for unreinforced resins and for composites showed that the cellulosic reinforcement is primarily responsible for the transport and uptake of moisture in the composites. The effect of chemical treatment on the cellulosic fibers, as a protection against moisture, was evaluated. However, the treatment did not improve the moisture resistance in composites significantly. Quasi-static tensile tests revealed that some of the bio-based resins and their composites performed very well and comparable to the composites of synthetic epoxy, even at high humidity. However, any structural material is supposed to hold mechanical loads over a long service time and most often in harsh environmental conditions. Hence, tension-tension fatigue tests were performed on the fiber bundles as well as on the composites. The fibers of choice as the reinforcement for further mechanical testing were regenerated cellulose fibers (RCF), mainly owing to the stable geometry and properties. Due to the high nonlinearity of RCF, the fatigue tests were limited in number and the focus was on analyzing the mechanisms underlying the fatigue behavior rather than on constructing S-N curves. Strain evolution of the bio-based composites during the dynamic fatigue was very similar to that observed in the static fatigue (creep). It confirmed the strong influence of viscoelastic and viscoplastic phenomena on the overall performance of the material under the rapid loading conditions in fatigue. Since the durability of composites greatly depends on the material¿s ability to stand the internal damages (e.g. debonding, microcracking, delaminations), the interfacial properties in the bio-based composites were addressed. To investigate the fracture toughness of bio-based composites, the double cantilever beam (DCB) tests were carried out, under static and dynamic loading. Moreover, the DCB results were utilized as a measure of the fiber chemical treatment¿s efficiency to improve the adhesion between RCF and the resin. The nonlinearity of RCF strongly influenced the results obtained from DCB tests, which complicated the analysis regarding the effectiveness of the fiber surface treatment. Nevertheless, this study brings forward the issues that have to be dealt with, in order to characterize and predict the performance of these composite materials with highly nonlinear reinforcing fibers. Overall, the results presented in this thesis give an insight into the behavior of bio-based composites, at various environments and under different types of mechanical loading. Based on these findings, the potential use of these materials in structural applications can be assessed.

High-Performance Materials from Bio-based Feedstocks The latest advancements in the production, properties, and performance of bio-based feedstock materials In High-Performance Materials from Bio-based Feedstocks, an accomplished team of researchers delivers a comprehensive exploration of recent developments in the research, manufacture, and application of advanced materials from bio-based feedstocks. With coverage of bio-based polymers, the inorganic components of biomass, and the conversion of biomass to advanced materials, the book illustrates the research and commercial potential of new technologies in the area. Real-life applications in areas as diverse as medicine, construction, synthesis, energy storage, agriculture, packaging, and food are discussed in the context of the structural properties of the materials used. The authors offer deep insights into materials production, properties, and performance. Perfect for chemists, environmental scientists, engineers, and materials scientists, High-Performance Materials from Bio-based Feedstocks will also earn a place in the libraries of academics, industrial researchers, and graduate students with an interest in biomass conversion, green chemistry, and sustainability. A thorough introduction to the latest developments in advanced bio-based feedstock materials research Comprehensive explorations of a vast range of real-world applications, from tissue scaffolds and drug delivery to batteries, sorbents, and controlled release fertilizers Practical discussions of the organic and inorganic components of biomass and the conversion of biomass to advanced materials In-depth examinations of the structural properties of commercially and academically significant biomass materials For more information on the Wiley Series in Renewable Resources, visit www.wiley.com/go/rrs

The sustainability of any process lies in the eco-friendly and economical production of products for applications. Bio-based materials are emerging as raw materials for different products and applications. The book covers cellulose, chitosan, silk, collagen and gelatin bio-based materials. It describes their use in biomedical applications, such as orthopaedic implant, drug delivery, tissue culture, biosensor and engineering applications such as fuel cells, energy storage and packaging. It concludes with the use of bio-based materials as precursors for biorefinery, biolubricants, membranes and adsorbents.

Bio-Based Polymers and Composites is the first book systematically describing the green engineering, chemistry and manufacture of biobased polymers and composites derived from plants. This book gives a thorough introduction to bio-based material resources, availability, sustainability, biobased polymer formation, extraction and refining technologies, and the need for integrated research and multi-disciplinary working teams. It provides an in-depth description of adhesives, resins, plastics, and composites derived from plant oils, proteins, starches, and natural fibers in terms of structures, properties, manufacturing, and product performance. This is an excellent book for scientists, engineers, graduate students and industrial researchers in the field of bio-based materials.* First book describing the utilization of crops to make high performance plastics, adhesives, and composites* Interdisciplinary approach to the subject, integrating genetic engineering, plant science, food science, chemistry, physics, nano-technology, and composite manufacturing.* Explains how to make green materials at low cost from soyoil, proteins, starch, natural fibers, recycled newspapers, chicken feathers and waste agricultural by-products.

The sustainability of any process lies in the eco-friendly and economical production of products for applications. Bio-based materials are emerging as raw materials for different products and applications. The book covers cellulose, chitosan, silk, collagen and gelatin bio-based materials. It describes their use in biomedical applications, such as orthopaedic implant, drug delivery, tissue culture, biosensor and engineering applications such as fuel cells, energy storage and packaging. It concludes with the use of bio-based materials as precursors for biorefinery, biolubricants, membranes and adsorbents.