The world of wireless communications is changing very rapidly since a few years. The introduction of digital data communication in combination with digital signal process ing has created the foundation for the development of many new wireless applications. High-quality digital wireless networks for voice communication with global and local coverage, like the GSM and DECT system, are only faint and early examples of the wide variety of wireless applications that will become available in the remainder of this decade. The new evolutions in wireless communications set new requirements for the trans ceivers (transmitter-receivers). Higher operating frequencies, a lower power consump tion and a very high degree of integration, are new specifications which ask for design approaches quite different from the classical RF design techniques. The integrata bility and power consumption reduction of the digital part will further improve with the continued downscaling of technologies. This is however completely different for the analog transceiver front-end, the part which performs the interfacing between the antenna and the digital signal processing. The analog front-end's integratability and power consumption are closely related to the physical limitations of the transceiver topology and not so much to the scaling of the used technology. Chapter 2 gives a detailed study of the level of integration in current transceiver realization and analyzes their limitations. In chapter 3 of this book the complex signal technique for the analysis and synthesis of multi-path receiver and transmitter topologies is introduced.

This comprehensive treatment of the challenges in low-power RF CMOS design deals with the design and implementation of low- power wireless transceivers in a standard digital CMOS process. It addresses trade-offs and techniques that improve performance, from the component level to the architectural level.

Design and Modeling of Millimeter-wave CMOS Circuits for Wireless Transceivers describes in detail some of the interesting developments in CMOS millimetre-wave circuit design. This includes the re-emergence of the slow-wave technique used on passive devices, the license-free 60GHz band circuit blocks and a 76GHz voltage-controlled oscillator suitable for vehicular radar applications. All circuit solutions described are suitable for digital CMOS technology. Digital CMOS technology developments driven by Moore’s law make it an inevitable solution for low cost and high volume products in the marketplace. Explosion of the consumer wireless applications further makes this subject a hot topic of the day. The book begins with a brief history of millimetre-wave research and how the silicon transistor is born. Originally meant for different purposes, the two technologies converged and found its way into advanced chip designs. The second part of the book describes the most important passive devices used in millimetre-wave CMOS circuits. Part three uses these passive devices and builds circuit blocks for the wireless transceiver. The book completes with a comprehensive list of references for further readings. Design and Modeling of Millimeter-wave CMOS Circuits for Wireless Transceivers is useful to show the analogue IC designer the issues involved in making the leap to millimetre-wave circuit designs. The graduate student and researcher can also use it as a starting point to understand the subject or proceed to innovative from the works described herein.

This book provides readers with detailed explanation of the design principles of CMOS integrated circuits for wireless medical and health care, from the perspective of two successfully-commercialized applications. Design techniques for both the circuit block level and the system level are discussed, based on real design examples. CMOS IC design techniques for the entire signal chain of wireless medical and health care systems are covered, including biomedical signal acquisition, wireless transceivers, power management and SoC integration, with emphasis on ultra-low-power IC design techniques.

This book provides comprehensive knowledge, aimed at practicing integrated circuit design engineer or researcher, to learn and design a low noise amplifier (LNA) for single and multiband applications. The content is structured in a way so that even a beginner can follow the design method easily. This book features the following characteristics: different types of LNA designs (with key building blocks) are discussed, and detailed analysis is given for each LNA design, which covers from the fundamental and principal knowledge to the justification of the design approach. Detailed design approaches are using 180 nm and 130nm CMOS technologies, purposely presented in this manner to give exposure to the design of LNA under different technologies. The LNAs in this book are designed for GSM, WCDMA and WLAN standards, but the same method can be used for other frequencies of operation. Comprehensive analyses on the extreme or corner condition effects are highlighted. Besides, detailed derivation of equations relating to the parameters of the LNA’s performance metrics help LNA designers in understanding how the performance metrics of the LNA can be optimized to meet the desired specification. Electromagnetic analyses using Sonnet, an electromagnetic tool able to replace the conventional post-layout simulation with resistance and capacitance parasitic extraction for more accurate frequency performance prediction are presented. The electromagnetic method is proposed to be used in the LNA design as it can accurately predict the LNA’s performance before tape-out for first-pass fabrication. MATLAB codes are provided to generate important S-parameters and noise figure values.

This book presents architectural and circuit techniques for wireless transceivers to achieve multistandard and low-voltage compliance. It provides an up-to-date survey and detailed study of the state-of-the-art transceivers for modern single- and multi-purpose wireless communication systems. The book includes comprehensive analysis and design of multimode reconfigurable receivers and transmitters for an efficient multistandard compliance.

Because they provide practical machine-to-machine communication at a very low cost, the popularity of wireless sensor networks is expected to skyrocket in the next few years, duplicating the recent explosion of wireless LANs. Wireless Sensor Networks: Architectures and Protocols describes how to build these networks, from the layers of the

CMOS Telecom Data Converters compiles the latest achievements regarding the design of high-speed and high-resolution data converters in deep submicron CMOS technologies. The four types of analog-to-digital converter architectures commonly found in this arena are covered, namely sigma-delta, pipeline, folding/interpolating and flash. For all these types, latest achievements regarding the solution of critical architectural and circuital issues are presented, and illustrated through IC prototypes with measured state-of-the-art performances. Some of these prototypes are conceived to be employed at the chipset of newest generation wireline modems (ADSL and ADSL+). Others are intended for wireless transceivers. Besides analog-to-digital converters, the book also covers other functions needed for communication systems, such as digital-to-analog converters, analog filters, programmable gain amplifiers, digital filters, and line drivers.

In the 11th edition in this successful series, the topics are structured-mixed-mode design, multi-bit sigma-delta converters and short range RF circuits. The book provides valuable information and excellent overviews of analogue circuit design, CAD and RF systems.