Techniques such as dead time compensation, adaptive control and Kalman filtering have been around for some time, but as yet find little application in industry. This is due to several reasons, including: Articles in the literature usually assume that the reader is familiar with a specific topic and are therefore often difficult for the practicing control engineer to comprehend. Many practicing control engineers in the process industry have a chemical engineering background and did not receive a control engineering education. There is a wide gap between theory and practical implementation, since implementation is primarily concerned with robustness, and theory is not. The user therefore has to build an "expert shell" in order to achieve the desired robustness. Little is published on this issue, however. This book tries to promote the use of advanced control techniques by taking the reader from basic theory to practical implementation. It is therefore of interest to practicing control engineers in various types of industries, especially the process industry. Graduate and undergraduate students in control engineering will also find the book extremely useful since many practical details are given which are usually omitted in books on control engineering. Of special interest are the simulation examples, illustrating the application of various control techniques. The examples are available on a 5-1/4" floppy disk and can be used by anyone who has access to LOTUS 1-2-3. Chapter 1 is the introduction; Chapters 2 through 6 deal with distributed control system networks, computer system software, computer system selection, reliability and security, and batch and continuous control. Chapter 7 gives and introduction to advanced control. Chapters 8 through 11 deal with dead time compensation techniques and model identification. Chapters 12 through 14 discuss constraint control and design, and the adjustment and application of simple process models and optimization. Chapter 15 gives a thorough introduction to adaptive control, and the last two chapters deal with state and parameter estimation. This book is a valuable tool for everyone who realizes the importance of advanced control in achieving improved plant performance. It will take the reader from theory to practical implementation.

Based on a series of lectures given at a Vacation School for postgraduate students in the areas of control and instrumentation, held at the University of Sheffield. It covers four major themes: design and tuning of controllers, the hardware technology, software design and applications.

Now in its second edition, this text presents the fundamentals of computer-based control of industrial processes. Intended primarily for undergraduate and postgraduate students of instrumentation and electronics engineering, the book will also be useful for professionals and researchers in these fields.

The proceedings of the fifth workshop in this subject continue the trend set by the previous four and discusses some of the current problems involved in the design and production of safe real-time computer systems. Topics covered include software quality assurance, software fault tolerance, design for safety, and reliability and safety assessment. Every paper details the theoretical and practical problems involved in the development of safe systems and should therefore be of interest to all those involved in systems design.

In this updated and amplified edition, Dr Pitblado answers the crucial questions of risk analysis: what can go wrong?; what are the effects and consequences?; and how often will it happen'.

This volume studies the advances of software for computers, their development, applications and management. Topics covered include software project management, real time languages and their uses, and computer aided design techniques. The book also discusses how far artificial intelligence is integrated with business and industry to give a complete overview of the role of computer systems today.

The purpose of this volume is to describe the components, assembly, and implementation of computer-based process control systems. Presented in two sections, it illustrates how such systems have been used to monitor and control industrial fermentation processes as a means to improve our understanding of product biosynthesis. This book covers the fields of indirect parameter estimation and fermentation-specific control algorithms. It also includes chapters which describe system architecture and process application, process control, on-line liquid sampling and computer system architecture. This is an ideal source for anyone involved with biotechnology, bioengineering, microbial technology, chemical engineering, and computer control.

Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field