This book is a printed edition of the Special Issue "Crystal Dislocations: Their Impact on Physical Properties of Crystals" that was published in Crystals

The proposed existence of the edge and screw dislocation in the 1930s, and the subsequent work showing that dislocation theory could explain the plastic deformation of crystals, represent an important step in developing our understanding of materials into a science. The continued work involved with characterization of dislocations and linking them to a variety of physical properties in both single and poly crystals have made enormous progress over the past 50 years. It is rare to find a technical application involving a material with any crystal structure that is not impacted by dislocations; mechanical properties, massive phase transformations, interphases, crystal growth, electronic properties, the list goes on. In many systems the properties is controlled by the formation of partial dislocations separated by a stacking fault; for example plastic deformation via deformation twinning. And finally, giant strides have been made in characterization and modeling of systems containing dislocations. The Special Issue on “Crystal Dislocations” is intended to provide a unique international forum aimed at covering a broad range of results involving dislocations and their importance on crystal properties and crystal growth. Scientists working in a wide range of disciplines are invited to contribute to this cause.Dr. K. Peter D. Lagerlof, Associate Professor of CeramicsGuest Editor

Materials Science has now become established as a discipline in its own right as well as being of increasing importance in the fields of Physics, Chemistry and Engineering. To the student meeting this subject for the first time the combination of disciplines which it embraces represents a formidable challenge. He will require to understand the lan guage of the physicist and chemist as well as appreciate the practical uses and limita tions of solid materials. This book has been written as an introduction to the Physical Properties of Materials with these thoughts in mind. The mathematical content has been limited deliberately and emphasis is placed on providing a sound basis using simplified models. Once these are understood we feel that a mathematical approach is more readily assimilated and for this purpose supplementary reading is suggested. While the authors are deeply aware of the pitfalls in attempting such a treatment this is meant to be an essentially simple book to point the many avenues to be explored. We anticipate that the book will appeal to first and second year degree students in a variety of disciplines and may not prove too difficult for those studying appropriate Higher National Certificate and Diploma courses. Electrical engineers working in the field of materials applications may well find it useful as a guide to modern thinking about materials and their properties. The book begins with an introduction to some basic ideas of modern physics.

This handbook is a unique compendium of knowledge on all aspects of the physics of liquid crystals. In over 500 pages it provides detailed information on the physical properties of liquid crystals as well as the recent theories and results on phase transitions, defects and textures of different types of liquid crystals. An in-depth understanding of the physical fundamentals is a prerequisite for everyone working in the field of liquid crystal research. With this book the experts as well as graduate students entering the field get all the information they need.

Single Crystals of Electronic Materials: Growth and Properties is a complete overview of the state-of-the-art growth of bulk semiconductors. It is not only a valuable update on the body of information on crystal growth of well-established electronic materials, such as silicon, III-V, II-VI and IV-VI semiconductors, but also includes chapters on novel semiconductors, such as wide bandgap oxides like ZnO, Ga2, O3, In2, O3, Al2, O3, nitrides (AIN and GaN), and diamond. Each chapter focuses on a specific material, providing a comprehensive overview that includes applications and requirements, thermodynamic properties, schematics of growth methods, and more. - Presents the latest research and most comprehensive overview of both standard and novel semiconductors - Provides a systematic examination of important electronic materials, including their applications, growth methods, properties, technologies and defect and doping issues - Takes a close look at emerging materials, including wide bandgap oxides, nitrides and diamond

ENGINEERING PHYSICS OF HIGH-TEMPERATURE MATERIALS Discover a comprehensive exploration of high temperature materials written by leading materials scientists In Engineering Physics of High-Temperature Materials: Metals, Ice, Rocks, and Ceramics distinguished researchers and authors Nirmal K. Sinha and Shoma Sinha deliver a rigorous and wide-ranging discussion of the behavior of different materials at high temperatures. The book discusses a variety of physical phenomena, from plate tectonics and polar sea ice to ice-age and intraglacial depression and the postglacial rebound of Earth’s crust, stress relaxation at high temperatures, and microstructure and crack-enhanced Elasto Delayed Elastic Viscous (EDEV) models. At a very high level, Engineering Physics of High-Temperature Materials (EPHTM) takes a multidisciplinary view of the behavior of materials at temperatures close to their melting point. The volume particularly focuses on a powerful model called the Elasto-Delayed-Elastic-Viscous (EDEV) model that can be used to study a variety of inorganic materials ranging from snow and ice, metals, including complex gas-turbine engine materials, as well as natural rocks and earth formations (tectonic processes). It demonstrates how knowledge gained in one field of study can have a strong impact on other fields. Engineering Physics of High-Temperature Materials will be of interest to a broad range of specialists, including earth scientists, volcanologists, cryospheric and interdisciplinary climate scientists, and solid-earth geophysicists. The book demonstrates that apparently dissimilar polycrystalline materials, including metals, alloys, ice, rocks, ceramics, and glassy materials, all behave in a surprisingly similar way at high temperatures. This similarity makes the information contained in the book valuable to all manner of physical scientists. Readers will also benefit from the inclusion of: A thorough introduction to the importance of a unified model of high temperature material behavior, including high temperature deformation and the strength of materials An exploration of the nature of crystalline substances for engineering applications, including basic materials classification, solid state materials, and general physical principles Discussions of forensic physical materialogy and test techniques and test systems Examinations of creep fundamentals, including rheology and rheological terminology, and phenomenological creep failure models Perfect for materials scientists, metallurgists, and glaciologists, Engineering Physics of High-Temperature Materials: Metals, Ice, Rocks, and Ceramics will also earn a place in the libraries of specialists in the nuclear, chemical, and aerospace industries with an interest in the physics and engineering of high-temperature materials.

This 18th volume of the series includes invited papers from the Seventh All-Union Conference on the Growth of Crystals and the Symposium on Molecular-Beam Epitaxy that were held in Moscow in November, 1988. In choosing papers, the Program Committee of the conference gave priority to studies in rapidly emerging areas of the growth and preparation of crystalS and crystalline films. The qualifications of the authors were also consid ered. This ensured that the material was of a high standard and that the problems discussed covered a wide range. These are the same criteria that, we hope, are typical of the volumes of this series. The articles of the present volume are divided into four sections: I. Processes on the growth surface. II. Molecular-beam epitaxy. III. Growth of crystals and films from solutions and fluxes. N. Growth of crystals from the melt. Following tradition, the series opens with three theoretical articles. These examine problems applicable to various crystallization media: instability of the crystallization front (for a more general case than before and for a comparatively complicated system, a solution), adsorption and migration of atoms and molecules (the analysis is made on a quantum-chemical level), and the kinetics of step and dislocation growth in the presence of surface anisotropy as well as impurity adsorption (several earlier known methods are summarized). The next two articles are experimental and methodical.