The general understanding of design is that it should lead to a manufacturable product. Neither the design nor the process of manufacturing is perfect. As a result, the product will be faulty, will require testing and fixing. Where does economics enter this scenario? Consider the cost of testing and fixing the product. If a manufactured product is grossly faulty, or too many of the products are faulty, the cost of testing and fixing will be high. Suppose we do not like that. We then ask what is the cause of the faulty product. There must be something wrong in the manufacturing process. We trace this cause and fix it. Suppose we fix all possible causes and have no defective products. We would have eliminated the need for testing. Unfortunately, things are not so perfect. There is a cost involved with finding and eliminating the causes of faults. We thus have two costs: the cost of testing and fixing (we will call it cost-1), and the cost of finding and eliminating causes of faults (call it cost-2). Both costs, in some way, are included in the overall cost of the product. If we try to eliminate cost-1, cost-2 goes up, and vice versa. An economic system of production will minimize the overall cost of the product. Economics of Electronic Design, Manufacture and Test is a collection of research contributions derived from the Second Workshop on Economics of Design, Manufacture and Test, written for inclusion in this book.

Focuses on the design and production of integrated circuits specifically designed for a particular application from original equipment manufacturers. The book outlines silicon and GaAs semiconductor fabrication techniques and circuit configurations; compares custom design style; discusses computer-aided design tools; and more.

The modern electronic testing has a forty year history. Test professionals hold some fairly large conferences and numerous workshops, have a journal, and there are over one hundred books on testing. Still, a full course on testing is offered only at a few universities, mostly by professors who have a research interest in this area. Apparently, most professors would not have taken a course on electronic testing when they were students. Other than the computer engineering curriculum being too crowded, the major reason cited for the absence of a course on electronic testing is the lack of a suitable textbook. For VLSI the foundation was provided by semiconductor device techn- ogy, circuit design, and electronic testing. In a computer engineering curriculum, therefore, it is necessary that foundations should be taught before applications. The field of VLSI has expanded to systems-on-a-chip, which include digital, memory, and mixed-signalsubsystems. To our knowledge this is the first textbook to cover all three types of electronic circuits. We have written this textbook for an undergraduate “foundations” course on electronic testing. Obviously, it is too voluminous for a one-semester course and a teacher will have to select from the topics. We did not restrict such freedom because the selection may depend upon the individual expertise and interests. Besides, there is merit in having a larger book that will retain its usefulness for the owner even after the completion of the course. With equal tenacity, we address the needs of three other groups of readers.

The 2nd edition of defect oriented testing has been extensively updated. New chapters on Functional, Parametric Defect Models and Inductive fault Analysis and Yield Engineering have been added to provide a link between defect sources and yield. The chapter on RAM testing has been updated with focus on parametric and SRAM stability testing. Similarly, newer material has been incorporated in digital fault modeling and analog testing chapters. The strength of Defect Oriented Testing for nano-Metric CMOS VLSIs lies in its industrial relevance.

Defect oriented testing is expected to play a significant role in coming generations of technology. Smaller feature sizes and larger die sizes will make ICs more sensitive to defects that can not be modeled by traditional fault modeling approaches. Furthermore, with increased level of integration, an IC may contain diverse building blocks. Such blocks include, digital logic, PLAs, volatile and non-volatile memories, and analog interfaces. For such diverse building blocks, traditional fault modeling and test approaches will become increasingly inadequate. Defect oriented testing methods have come a long way from a mere interesting academic exercise to a hard industrial reality. Many factors have contributed to its industrial acceptance. Traditional approaches of testing modern integrated circuits (ICs) have been found to be inadequate in terms of quality and economics of test. In a globally competitive semiconductor market place, overall product quality and economics have become very important objectives. In addition, electronic systems are becoming increasingly complex and demand components of highest possible quality. Testing, in general and, defect oriented testing, in particular, help in realizing these objectives. Defect Oriented Testing for CMOS Analog and Digital Circuits is the first book to provide a complete overview of the subject. It is essential reading for all design and test professionals as well as researchers and students working in the field. `A strength of this book is its breadth. Types of designs considered include analog and digital circuits, programmable logic arrays, and memories. Having a fault model does not automatically provide a test. Sometimes, design for testability hardware is necessary. Many design for testability ideas, supported by experimental evidence, are included.' ... from the Foreword by Vishwani D. Agrawal

A recent technological advance is the art of designing circuits to test themselves, referred to as a Built-In Self-Test. This book is written from a designer's perspective and describes the major BIST approaches that have been proposed and implemented, along with their advantages and limitations.

"System level testing is becoming increasingly important. It is driven by the incessant march of complexity ... which is forcing us to renew our thinking on the processes and procedures that we apply to test and diagnosis of systems. In fact, the complexity defines the system itself which, for our purposes, is ¿any aggregation of related elements that together form an entity of sufficient complexity for which it is impractical to treat all of the elements at the lowest level of detail . System approaches embody the partitioning of problems into smaller inter-related subsystems that will be solved together. Thus, words like hierarchical, dependence, inference, model, and partitioning are frequent throughout this text. Each of the authors deals with the complexity issue in a similar fashion, but the real value in a collected work such as this is in the subtle differences that may lead to synthesized approaches that allow even more progress. The works included in this volume are an outgrowth of the 2nd International Workshop on System Test and Diagnosis held in Alexandria, Virginia in April 1998. The first such workshop was held in Freiburg, Germany, six years earlier. In the current workshop nearly 50 experts from around the world struggled over issues concerning the subject... In this volume, a select group of workshop participants was invited to provide a chapter that expanded their workshop presentations and incorporated their workshop interactions... While we have attempted to present the work as one volume and requested some revision to the work, the content of the individual chapters was not edited significantly. Consequently, you will see different approaches to solving the same problems and occasional disagreement between authors as to definitions or the importance of factors. ... The works collected in this volume represent the state-of-the-art in system test and diagnosis, and the authors are at the leading edge of that science...”. From the Preface

In the early days of digital design, we were concerned with the logical correctness of circuits. We knew that if we slowed down the clock signal sufficiently, the circuit would function correctly. With improvements in the semiconductor process technology, our expectations on speed have soared. A frequently asked question in the last decade has been how fast can the clock run. This puts significant demands on timing analysis and delay testing. Fueled by the above events, a tremendous growth has occurred in the research on delay testing. Recent work includes fault models, algorithms for test generation and fault simulation, and methods for design and synthesis for testability. The authors of this book, Angela Krstic and Tim Cheng, have personally contributed to this research. Now they do an even greater service to the profession by collecting the work of a large number of researchers. In addition to expounding such a great deal of information, they have delivered it with utmost clarity. To further the reader's understanding many key concepts are illustrated by simple examples. The basic ideas of delay testing have reached a level of maturity that makes them suitable for practice. In that sense, this book is the best x DELAY FAULT TESTING FOR VLSI CIRCUITS available guide for an engineer designing or testing VLSI systems. Tech niques for path delay testing and for use of slower test equipment to test high-speed circuits are of particular interest.

Test functions (fault detection, diagnosis, error correction, repair, etc.) that are applied concurrently while the system continues its intended function are defined as on-line testing. In its expanded scope, on-line testing includes the design of concurrent error checking subsystems that can be themselves self-checking, fail-safe systems that continue to function correctly even after an error occurs, reliability monitoring, and self-test and fault-tolerant designs. On-Line Testing for VLSI contains a selected set of articles that discuss many of the modern aspects of on-line testing as faced today. The contributions are largely derived from recent IEEE International On-Line Testing Workshops. Guest editors Michael Nicolaidis, Yervant Zorian and Dhiraj Pradhan organized the articles into six chapters. In the first chapter the editors introduce a large number of approaches with an expanded bibliography in which some references date back to the sixties. On-Line Testing for VLSI is an edited volume of original research comprising invited contributions by leading researchers.

MCMs today consist of complex and dense VLSI devices mounted into packages that allow little physical access to internal nodes. The complexity and cost associated with their test and diagnosis are major obstacles to their use. Multi-Chip Module Test Strategies presents state-of-the-art test strategies for MCMs. This volume of original research is designed for engineers interested in practical implementations of MCM test solutions and for designers looking for leading edge test and design-for-testability solutions for their next designs. Multi-Chip Module Test Strategies consists of eight contributions by leading researchers. It is designed to provide a comprehensive and well-balanced coverage of the MCM test domain. Multi-Chip Module Test Strategies has also been published as a special issue of the Journal of Electronic Testing: Theory and Applications (JETTA, Volume 10, Numbers 1 and 2).