This book presents a comprehensive review of particle image velocimetry (PIV) and particle tracking velocimetry (PTV) as tools for experimental fluid dynamics (EFD). It shares practical techniques for high-speed photography to accurately analyze multi-phase flows; in particular, it addresses the practical know-how involved in high-speed photography, including e.g. the proper setup for lights and illumination; optical systems to remove perspective distortion; and the density of tracer particles and their fluorescence in the context of PIV and PTV. In this regard, using the correct photographic technique plays a key role in the accurate analysis of the respective flow. Practical applications include bubble and liquid flow dynamics in materials processes agitated by gas injection at high temperatures, mixing phenomena due to jet-induced rotary sloshing, and wettability effects on the efficiency of the processes.

It is not good to have zeal without knowledge • . . . Book of Proverbs This volume constitutes the proceedings of the Third International Workshop on Materials Processing at High Gravity. It offers the latest results in a new field with immense potential for commercialization, making this book a vital resource for research and development professionals in industry, academia and government. We have titled the proceedings Centrifugal Materials Processing to emphasize that centrifugation causes more than an increase in acceleration. It also introduces the Coriolis force and a gradient of acceleration, both of which have been discovered to play important roles in materials processing. The workshop was held June 2-8, 1996 on the campus of Clarkson University in Potsdam, New York, under the sponsorship of Corning Corporation and the International Center for Gravity Materials Science and Applications. The meeting was very productive and exciting, with energetic discussions of the latest discoveries in centrifugal materials processing, continuing the atmosphere of the first workshop held in 1991 at Dubna (Russia) and the second workshop held in 1993 in Potsdam, New York. Results and research plans were presented for a wide variety of centrifugal materials processing, including directional solidification of semiconductors, crystallization of high Tc superconductors, growth of diamond thin films, welding, alloy casting, solution behavior and growth, protein crystal growth, polymerization, and flow behavior. Also described were several centrifuge facilities that have been constructed for research, with costs beginning at below $1000.

With contributions from some of the world's leading experts, the second edition of this classic reference compiles all major techniques of flow visualization and demonstrates their applications in all fields of science and technology. A new chapter has been added that covers flow visualization applications in large wide tunnels for airplane and automobile testing. Several important examples of applications are included. A second new chapter details the use of infrared (IR) cameras for detecting and observing the boundary layer transition in industrial wind tunnels and flight testing of commercial transport airplanes. A final new chapter has been added on multiphase flow and pulsed-light velocimetry.

This collection presents contributions on computational fluid dynamics (CFD) modeling and simulation of engineering processes from researchers and engineers involved in the modeling of multiscale and multiphase phenomena in material processing systems. The following processes are covered: Additive Manufacturing (Selective Laser Melting and Laser Powder Bed Fusion); Ironmaking and Steelmaking (Ladle Metallurgical Furnace, EAF, Continuous Casting, Blown Converter, Reheating Furnace, Rotary Hearth Furnace); Degassing; High Pressure Gas Atomization of Liquid Metals; Electroslag Remelting; Electrokinetic Deposition; Friction Stir Welding; Quenching; High Pressure Die Casting; Core Injection Molding; Evaporation of Metals; Investment Casting; Electromagnetic Levitation; Ingot Casting; Casting and Solidification with External Field (electromagnetic stirring and ultrasonic cavitation) Interaction and Microstructure Evolution The collection also covers applications of CFD to engineering processes, and demonstrates how CFD can help scientists and engineers to better understand the fundamentals of engineering processes.

This volume constitutes the proceedings of the Fourth International Workshop on Materials Processing at High Gravity, held at Clarkson University, May 29 to June 2, 2000. There were 73 attendees from 16 countries. Since the topics extended well beyond materials processing, it was felt appropriate to name this proceedings "Centrifugal Processing." Processing by Centrifugation includes the traditional bench-scale centrifuges, as well as all rotating systems utilizing the centrifugal and Coriolis forces to provide unique performance. Centrifugation led to the formation of sticky porous Teflon membranes, as well as improved polymeric solar cells. Centrifugation on large equipment improved the chemical vapor deposition of diamond films, influenced the growth and dissolution of semiconductor crystals, and elucidated the influence of gravity on coagulation of colloidal Teflon. A million g centrifuge was constructed and used to study sedimentation in solids and to prepare compositionally graded materials and new phases. Rotation of a pipe about its axis allowed the casting of large-diameter metal alloy pipes as well as coating the interior of pipes with a cermet utilizing self-propagating high-temperature synthesis. Such coatings are highly corrosion and erosion resistant. Flow on a rotating disk was shown to be useful for process intensification, such as large-scale manufacturing of nano-particles, polymerization reactions, and heat & mass transfer. Several theoretical studies dealt with the influence of rotation on fluid convection on surfaces and in pipes, tubes, and porous media. These have applications to integrated-circuit chip manufacturing, alloy casting, oil production, crystal growth, and the operation of rotating machinery.

The past few decades have brought significant advances in the computational methods and in the experimental techniques used to study transport phenomena in materials processing operations. However, the advances have been made independently and with competition between the two approaches. Mathematical models are easier and less costly to implement, but experiments are essential for verifying theoretical models. In Mathematical and Physical Modeling of Materials Processing Operations, the authors bridge the gap between mathematical modelers and experimentalists. They combine mathematical and physical modeling principles for materials processing operations simulation and use numerous examples to compare theoretical and experimental results. The modeling of transport processes is multi-disciplinary, involving concepts and principles not all of which can be associated with just one field of study. Therefore, the authors have taken care to ensure that the text is self-sustaining through the variety and breadth of topics covered. Beyond the usual topics associated with transport phenomena, the authors also include detailed discussion of numerical methods and implementation of process models, software and hardware selection and application, and representation of auxiliary relationships, including turbulence modeling, chemical kinetics, magnetohydrodynamics, and multi-phase flow. They also provide several correlations for representing the boundary conditions of fluid flow, heat transfer, and mass transfer phenomena. Mathematical and Physical Modeling of Materials Processing Operations is ideal for introducing these tools to materials engineers and researchers. Although the book emphasizes materials, some of the topics will prove interesting and useful to researchers in other fields of chemical and mechanical engineering.

There are two motives for studying materials processing in centrifuges. First, such research improves our understanding of the influence of acceleration and convection on materials processing. Second, there are commercial opportunities for production of unique and improved materials that cannot be prepared under normal earth conditions or in space. Through a combination of experiments and theory, we are gaining an understanding of centrifugation on phenomena of importance to materials processing. We find that it is necessary to consider not only acceleration, but also the Corio lis effect and the variation of acceleration with position. As one consequence, the vigor of buoyancy-driven convection is sometimes increased by centrifugation and sometimes decreased. Similarly, the tendency of the convection to become unstable or oscillatory may either be increased or decreased by centrifugation. On the other hand, the observed effects of centrifugation on product quality have largely gone unexplained. This volume constitutes the proceedings of The Second International Workshop on Materials Processing at High Gravity, hosted by Clarkson University in June of 1993. The concept for a workshop on materials processing in centrifuges was born at a series of informal meetings held in Paris in 1990. The First International Workshop on Materials Processing at High Gravity was held in May of 1991 in Dubna, USSR, on the banks of the Volga River. The proceedings of this workshop was published in 1992 as a special issue of the Journal of Crystal Growth.

In the recent decade a quantum leap has been made in production of aluminum alloys and new techniques of casting, forming, welding and surface modification have been evolved to improve the structural integrity of aluminum alloys. This book covers the essential need for the industrial and academic communities for update information. It would also be useful for entrepreneurs technocrats and all those interested in the production and the application of aluminum alloys and strategic structures. It would also help the instructors at senior and graduate level to support their text.