This book puts together a body of very recent information never before presented in one volume on the design of post-release mitigation systems. The development of a fundamental knowledge base on post-release mitigation systems, through testing and data correlation, is very new. While further research and development is needed, this practical work offers guidance on putting post-release countermeasures to work now. The book presents current engineering methods for minimizing the consequences of the release of toxic vapors, or ignition of flammable vapors, including passive and active systems intended to reduce or eliminate significant acute effects of a dispersing vapor cloud in the plant facility, or into the surrounding community. As in all CCPS works, the book emphasizes planning and a systems approach, shows limitations of any methods discussed, and provides numerous references so that the reader may continue to learn.

Members of the Center for Chemical Process Safety describe the current engineering practices for minimizing the consequences when toxic vapors or the ignition of flammable vapors have been accidently released despite the prevention methods they have previously identified. They focus on post-release systems, either passive such as dikes or berms around storage tanks; or active such as water-spray, deluge, or spraying foam. They do not cover fire fighting, blast protection, or environmental control of response methods Covers release scenarios, reducing vaporization, fluid curtains, secondary containment, detection and response, and examples of mitigation effectiveness. Annotation copyrighted by Book News, Inc., Portland, OR

This book provides guidance on characterizing, recognizing, and responding to warning signs to help avoid process incidents and injuries before they occur. The guidance can be used by both process safety management (PSM) professionals in evaluating their processes and PSM systems as well as for operators who are often the frontline defense against process incidents. Warning signs may consist of process deviations or upsets, instrumentation warnings or alarms, past operating history and incidents, observable problems such as corrosion or unusual odors, audit results indicating procedures are not being followed, or a number of other indicators. Filled with photos and practical tips, this book will turn anyone in a process plant into a hazard lookout and will help prevent potential incidents before they turn into catastrophic events.

Prevention, preparedness, response and recovery--the key components of emergency planning--form the major sections of this work. The book first describes PSM (Process Safety Management) as the key to prevention, then goes on to consider the main features of a preparedness program, including recognizing credible incidents, planning practical strategy to deal with these incidents, selecting necessary physical support systems and equipment, and developing a complete emergency response plan. The Response section presents the functions implemented during an actual emergency and concludes with a section on managing cleanup and restoration of operations. The many tables and figures include Sample Incident Command System Plans for both large and small organizations, OSHA and EPA regulations affecting planning, sample Fire Emergency Action Levels, HAZMAT Responder Levels, and OSHA Emergency Training Requirements.

Batch reaction systems pose unique challenges to process safety managers because they do not operate in a steady state. The sequence of processing steps, and frequent start-ups and shutdowns, increase the possibility of human errors and equipment failures. And, since batch plants are often designed for shared use, frequent modification of piping and layout may occur, resulting in complex "management of change" issues. This book identifies the singular concerns of batch reaction systems—including potential sources of unsafe conditions—and provides a "how-to" guide for the practicing engineer in dealing with them by applying appropriate practices to prevent accidents.

From fundamentals to plant operations, Albright's Chemical Engineering Handbook offers a thorough, yet succinct guide to day-to-day methods and calculations used in chemical engineering applications. Leaders from an exceptional diversity of specialties provide a clear review of basic information, case examples, and references to additional information. They discuss essential principles, calculations, and key issues such as reaction engineering, process control and design, waste disposal, and electrochemical and biochemical engineering. The final chapters cover aspects of patents, intellectual property, communications, and ethics that are most relevant to engineers.

Siting of permanent and temporary buildings in process areas requires careful consideration of potential effects of explosions and fires arising from accidental release of flammable materials. This book, which updates the 1996 edition, provides a single-source reference that explains the American Petroleum Institute (API) permanent (752) and temporary (753) building recommended practices and details how to implement them. New coverage on toxicity and updated standards are also highlighted. Practical and easy-to-use, this reliable guide is a must-have for implementing safe building practices.

This book is an update and expansion of topics covered in Guidelines for Mechanical Integrity Systems (2006). The new book is consistent with Risk-Based Process Safety and Life Cycle approaches and includes details on failure modes and mechanisms. Also, example testing an inspection programs is included for various types of equipment and systems. Guidance and examples are provided for selecting and maintaining critical safety systems.

""Written by engineers for engineers (with over 150 International Editorial Advisory Board members),this highly lauded resource provides up-to-the-minute information on the chemical processes, methods, practices, products, and standards in the chemical, and related, industries.

Process vent header collection systems are subject to continually varying compositions and flow rates and thus present significant challenges for safe design. Due to increasingly demanding safety, health, environmental, and property protection requirements, today's industrial designers are faced with the need to create increasingly complex systems for more effective treatment, dispersal, or disposal of process gases. Safe Design and Operation of Process Vents and Emission Control Systems provides cutting-edgeguidance for the design, evaluation, and operation of these systems, with emphasis on: Preventing fires, explosions, and toxic releases Maintaining safe vent conditions Understanding normal process operations, such as intentional routine controlled venting and emergency operations, like overpressure relief Mitigating the impacts of end-of-line treatment devices, such as scrubbers, flares, and thermal oxidizers, on the vent header system Complying with regulations Written by a team of process safety experts from the chemical, pharmaceutical, and petroleum industries, the book includes a wealth of real-world examples and a thorough overview of the tools and methods used in the profession.