Industrial radiography is a well-established non-destructive testing (NDT) method in which the basic principles were established many years ago. However, during 1993-95 the European Standards Organisa tion (CEN) commenced drafting many new standards on NDT including radiographic methods, and when completed these will replace national standards in all the EC member countries. In some cases these standards vary significantly from those in use in the UK at present. These CEN standards are accepted by majority, not unanimous voting, so they will become mandatory even in countries which vote against them. As most are likely to be legal by the time this second edition is published, they are described in the appropriate places in the text. The most important new technical development is the greater use of computers in radiology. In the first edition, computerized tomography was only briefly mentioned at the end of Chapter 11, as it was then largely a medical method with only a few equipments having found a place in industrial use. The method depends on a complex computer program and a large data store. Industrial equipments are now being built, although their spread into industry has been slow. Computer data storage is also being used for radiographic data. Small computers can now store all the data produced by scanning a radiographic film with a small light-spot, and various programs can be applied to these data.

Containing chapter contributions from over 130 experts, this unique publication is the first handbook dedicated to the physics and technology of X-ray imaging, offering extensive coverage of the field. This highly comprehensive work is edited by one of the world’s leading experts in X-ray imaging physics and technology and has been created with guidance from a Scientific Board containing respected and renowned scientists from around the world. The book's scope includes 2D and 3D X-ray imaging techniques from soft-X-ray to megavoltage energies, including computed tomography, fluoroscopy, dental imaging and small animal imaging, with several chapters dedicated to breast imaging techniques. 2D and 3D industrial imaging is incorporated, including imaging of artworks. Specific attention is dedicated to techniques of phase contrast X-ray imaging. The approach undertaken is one that illustrates the theory as well as the techniques and the devices routinely used in the various fields. Computational aspects are fully covered, including 3D reconstruction algorithms, hard/software phantoms, and computer-aided diagnosis. Theories of image quality are fully illustrated. Historical, radioprotection, radiation dosimetry, quality assurance and educational aspects are also covered. This handbook will be suitable for a very broad audience, including graduate students in medical physics and biomedical engineering; medical physics residents; radiographers; physicists and engineers in the field of imaging and non-destructive industrial testing using X-rays; and scientists interested in understanding and using X-ray imaging techniques. The handbook's editor, Dr. Paolo Russo, has over 30 years’ experience in the academic teaching of medical physics and X-ray imaging research. He has authored several book chapters in the field of X-ray imaging, is Editor-in-Chief of an international scientific journal in medical physics, and has responsibilities in the publication committees of international scientific organizations in medical physics. Features: Comprehensive coverage of the use of X-rays both in medical radiology and industrial testing The first handbook published to be dedicated to the physics and technology of X-rays Handbook edited by world authority, with contributions from experts in each field

A quick, easy-to-consult source of practical overviews on wide-ranging issues of concern for those responsible for the health and safety of workers This new and completely revised edition of the popular Handbook is an ideal, go-to resource for those who need to anticipate, recognize, evaluate, and control conditions that can cause injury or illness to employees in the workplace. Devised as a “how-to” guide, it offers a mix of theory and practice while adding new and timely topics to its core chapters, including prevention by design, product stewardship, statistics for safety and health, safety and health management systems, safety and health management of international operations, and EHS auditing. The new edition of Handbook of Occupational Safety and Health has been rearranged into topic sections to better categorize the flow of the chapters. Starting with a general introduction on management, it works its way up from recognition of hazards to safety evaluations and risk assessment. It continues on the health side beginning with chemical agents and ending with medical surveillance. The book also offers sections covering normal control practices, physical hazards, and management approaches (which focuses on legal issues and workers compensation). Features new chapters on current developments like management systems, prevention by design, and statistics for safety and health Written by a number of pioneers in the safety and health field Offers fast overviews that enable individuals not formally trained in occupational safety to quickly get up to speed Presents many chapters in a "how-to" format Featuring contributions from numerous experts in the field, Handbook of Occupational Safety and Health, 3rd Edition is an excellent tool for promoting and maintaining the physical, mental, and social well-being of workers in all occupations and is important to a company’s financial, moral, and legal welfare.