This IBM® Redbooks® publication captures several of the preferred practices and describes the performance gains that can be achieved by implementing the IBM FlashSystem® 9100. These practices are based on field experience. This book highlights configuration guidelines and preferred practices for the storage area network (SAN) topology, clustered system, back-end storage, storage pools and managed disks, volumes, remote copy services, and hosts. It explains how you can optimize disk performance with the IBM System Storage® Easy Tier® function. It also provides preferred practices for monitoring, maintaining, and troubleshooting. This book is intended for experienced storage, SAN, IBM FlashSystem, SAN Volume Controller and Storwize® administrators and technicians. Understanding his book requires advanced knowledge of these environments. Important, IBM FlashSystem 9200: On 11th February 2020 IBM announced the arrival of the IBM FlashSystem 9200 to the family. This book was written specifically for IBM FlashSystem 9100, however most of the general principles will apply to the IBM FlashSystem 9200. If you are in any doubt as to their applicability to the FlashSystem 9200 then you should work with your local IBM representative. This book will be updated to include FlashSystem 9200 in due course.

This IBM® Redbooks® publication captures several of the preferred practices and describes the performance gains that can be achieved by implementing the IBM FlashSystem® 9100. These practices are based on field experience. This book highlights configuration guidelines and preferred practices for the storage area network (SAN) topology, clustered system, back-end storage, storage pools and managed disks, volumes, remote copy services, and hosts. It explains how you can optimize disk performance with the IBM System Storage® Easy Tier® function. It also provides preferred practices for monitoring, maintaining, and troubleshooting. This book is intended for experienced storage, SAN, IBM FlashSystem, SAN Volume Controller and Storwize® administrators and technicians. Understanding his book requires advanced knowledge of these environments. Important, IBM FlashSystem 9200: On 11th February 2020 IBM announced the arrival of the IBM FlashSystem 9200 to the family. This book was written specifically for IBM FlashSystem 9100, however most of the general principles will apply to the IBM FlashSystem 9200. If you are in any doubt as to their applicability to the FlashSystem 9200 then you should work with your local IBM representative. This book will be updated to include FlashSystem 9200 in due course.

This IBM® Redbooks® publication captures several of the preferred practices and describes the performance gains that can be achieved by implementing the IBM FlashSystem® products that are powered by IBM Spectrum® Virtualize Version 8.4.2. These practices are based on field experience. This book highlights configuration guidelines and preferred practices for the storage area network (SAN) topology, clustered system, back-end storage, storage pools and managed disks, volumes, Remote Copy services, and hosts. It explains how you can optimize disk performance with the IBM System Storage Easy Tier® function. It also provides preferred practices for monitoring, maintaining, and troubleshooting. This book is intended for experienced storage, SAN, IBM FlashSystem, SAN Volume Controller, and IBM Storwize® administrators and technicians. Understanding this book requires advanced knowledge of these environments.

The FlashSystem 9200 combines the performance of flash and end-to-end Non-Volatile Memory Express (NVMe) with the reliability and innovation of IBM® FlashCore technology, the ultra-low latency of Storage Class Memory (SCM), the rich features of IBM Spectrum® Virtualize and AI predictive storage management, and proactive support by Storage Insights. All of these features are included in a powerful 2U enterprise-class, blazing fast storage all-flash array.

This IBM® Redbooks® publication captures several of the preferred practices and describes the performance gains that can be achieved by implementing the IBM SAN Volume Controller powered by IBM Spectrum® Virtualize Version 8.4.2. These practices are based on field experience. This book highlights configuration guidelines and preferred practices for the storage area network (SAN) topology, clustered system, back-end storage, storage pools and managed disks, volumes, Remote Copy services and hosts. It explains how you can optimize disk performance with the IBM System Storage Easy Tier® function. It also provides preferred practices for monitoring, maintaining, and troubleshooting. This book is intended for experienced storage, SAN, IBM FlashSystem®, IBM SAN Volume Controller, and IBM Storwize® administrators and technicians. Understanding this book requires advanced knowledge of these environments.

When you are using IBM® FlashCore Modules with IBM FlashSystem® 9200 and 9100, for most use cases the best practice is to use Data Reduction Pools with fully allocated volumes. This sheet guides you through the process to create these volumes.

Companies need to migrate data not only when technology needs to be replaced, but also for consolidation, load balancing, and disaster recovery (DR). Data migration is a critical operation, and this book explains the phases and steps to ensure a smooth migration. Topics range from planning and preparation to execution and validation. The book explains, from a generic standpoint, the appliance-based, storage-based, and host-based techniques that can be used to accomplish the migration. Each method is explained through practical migration scenarios and for various operating systems. This publication addresses the aspects of data migration efforts while focusing on fixed block storage systems in open environment with the IBM® FlashSystem 9100 as the target system. Therefore, the book also emphasizes various migration techniques using the Spectrum Virtualize built-in functions. This document targets storage administrators, storage network administrators, system designers, architects, and IT professionals who design, administer or plan data migrations in large data Centers. The aim is to ensure that you are aware of the current thinking, methods, and products that IBM can make available to you. These items are provided to ensure a data migration process that is as efficient and problem-free as possible. The material presented in this book was developed with versions of the referenced products as of February, 2020.

This IBM® Redbooks® publication describes several of the preferred practices and describes the performance gains that can be achieved by implementing the IBM SAN Volume Controller powered by IBM Spectrum® Virtualize V8.4. These practices are based on field experience. This book highlights configuration guidelines and preferred practices for the storage area network (SAN) topology, clustered system, back-end storage, storage pools, and managed disks, volumes, Remote Copy services, and hosts. Then, it provides performance guidelines for IBM SAN Volume Controller, back-end storage, and applications. It explains how you can optimize disk performance with the IBM System Storage Easy Tier® function. It also provides preferred practices for monitoring, maintaining, and troubleshooting IBM SAN Volume Controller. This book is intended for experienced storage, SAN, and IBM SAN Volume Controller administrators and technicians. Understanding this book requires advanced knowledge of the IBM SAN Volume Controller, IBM FlashSystem, and SAN environments.

This IBM® Redbooks® publication is a detailed technical guide to the IBM System StorageTM SAN Volume Controller, which is powered by IBM Spectrum® Virtualize V8.3.1. IBM SAN Volume Controller is a virtualization appliance solution that maps virtualized volumes that are visible to hosts and applications to physical volumes on storage devices. Each server within the storage area network (SAN) has its own set of virtual storage addresses that are mapped to physical addresses. If the physical addresses change, the server continues running by using the same virtual addresses that it had before. Therefore, volumes or storage can be added or moved while the server is still running. The IBM virtualization technology improves the management of information at the block level in a network, which enables applications and servers to share storage devices on a network.

In this multicloud and cognitive era, information continues to grow rapidly. By 2025, IDC says worldwide data will grow by 61% to 175 zettabytes, with as much of the data in data centers as in the cloud. IT environments with Oracle deployments will need to accommodate that data growth, including storing, copying, mirroring, and protecting the data. When IT budgets are constrained but data keeps growing, storage costs can consume more than their fair share of the IT budget. The leading-edge portfolio of storage solutions and essential technologies of IBM® can help organizations stay ahead of the information explosion. Designed with built-in efficiency, these solutions represent preferred practices that address the following main storage objectives for hybrid multicloud environments: Stop storing so much Store more with what you have. Move Oracle and related data to balance performance and efficiency IBM offers true enterprise class storage support for Oracle deployments at a low total cost of ownership (TCO). With flash disk, tape, storage network hardware, consolidated management console, software-defined storage solutions, and security software, IBM can provide Oracle customers the full spectrum of products to meet their availability, retention, security, and compliance requirements.