This IBM® Redbooks® publication describes the concepts, architecture, and implementation of the IBM System Storage® DS8700 storage subsystem. This book has reference information that will help you plan for, install, and configure the DS8700 and also discusses the architecture and components. The DS8700 is the most advanced model in the IBM System Storage DS8000® series. It includes IBM POWER6®-based controllers, with a dual 2-way or dual 4-way processor complex implementation. Its extended connectivity, with up to 128 Fibre Channel/FICON® ports for host connections, make it suitable for multiple server environments in both open systems and IBM System z® environments. If desired, the DS8700 can be integrated in an LDAP infrastructure. The DS8700 supports thin provisioning. Depending on your specific needs, the DS8700 storage subsystem can be equipped with SATA drives, FC drives, and Solid® State Drives (SSDs). The DS8700 can now automatically optimize the use of SSD drives through its no charge Easy Tier feature. The DS8700 also supports Full Disk Encryption (FDE) feature. Its switched Fibre Channel architecture, dual processor complex implementation, high availability design, and the advanced Point-in-Time Copy and Remote Mirror and Copy functions that incorporates make the DS8700 storage subsystem suitable for mission-critical business functions.

Booting servers from a storage area network (SAN) is being used increasingly in complex data center environments today, due to its significant benefits over the traditional method of booting from local disks. SAN Boot enables organizations to maximize consolidation of their IT resources, minimize their equipment costs, and realize the considerable management benefits of centralizing the boot process. In SAN Boot, you can deploy diskless servers in an environment where the boot disk is located on (often RAID-capable) storage connected to the SAN. The server (initiator) communicates with the storage device (target) through the SAN using the Fibre Channel host bus adapter (HBA). The system downtime is greatly minimized in case a critical component such as a processor, memory, or host bus adapter fails and needs to be replaced. The system administrator needs to swap only the hardware and reconfigure the HBA's BIOS, switch zoning, and host-port definitions on the storage server. The system image still exists on the logical drive, therefore the server is fully operational after the hardware swap and configuration change is completed. This IBM® Redbooks® publication can help you with the SAN Boot implementation. We present various SAN Boot scenarios using IBM System Storage® products that include DS5000, DS8000®, XIV®, and SVC. The operating systems that are covered include Windows 2008, Red Hat Linux, SUSE Linux, and VMware.

An information infrastructure is comprised of software, servers, storage, and networks, integrated and optimized to deliver timely, secure, and trusted information throughout the organization and to its clients and partners. With the explosive growth in data and information—coupled with demands for projects with rapid ROI—IT infrastructures and storage administrators are reaching a breaking point. IBM® can help with the changes needed to manage information availability, security, and regulatory and compliance requirements on a tighter budget. And because the health of any business often depends on its ability to take advantage of information in real time, a sound, intelligent information infrastructure becomes critical to supporting new growth initiatives. IBM offers an innovative approach to help you manage information growth more effectively and mitigate risks with a dynamic infrastructure that efficiently and securely stores and protects information, and optimizes information access. You can control, protect, manage, and gain new intelligence from your information with the IBM leading-edge Information Infrastructure products, services and integrated solutions, supported by world-class expertise and access to top experts from around the world. This IBM Redbooks® publication provides an overview of the IBM Information Infrastructure solutions that are designed to help you manage the information explosion and address challenges of information compliance, availability, retention, and security. This will lead your company toward improved productivity, service delivery, and reduced risk, while streamlining costs.

Many organizations require continuous operation of their mission-critical, IBM® FileNet P8® systems after a failure has occurred. Loss of system resources and services as a result of any failure can translate directly into lost customers and lost revenue. The goal, therefore, is to design and implement a FileNet P8 system that ensures continuous operation even after a failure happens. This IBM Redbooks® publication focuses on FileNet P8 Version 4.5.1 systems disaster recovery. The book covers strategies, preparation levels, site sizing, data replication, testing, and what to do during a disaster. Backup and restore planning is a critical aspect of a disaster recovery strategy. We discuss backup types and strategies. We also discuss alternative strategies such as rolling storage policies and IBM FlashCopy® capability. With the help of use cases and our lab testing environment, the book provides guidelines for setting up a FileNet P8 production environment and a standby FileNet P8 disaster recovery system. This book is intended for IT architects, IT specialists, project managers, and decision makers, who must identify the best disaster recovery strategies and integrate them into the FileNet P8 system design process.

The IBM® Smart Analytics System 9600 is a single, end-to-end business analytics solution to accelerate data warehousing and business intelligence initiatives. It provides integrated hardware, software, and services that enable enterprise customers to quickly and cost-effectively deploy business-changing analytics across their organizations. As a workload-optimized system for business analytics, it leverages the strengths of the System z® platform to drive: Significant savings in hardware, software, operating, and people costs to deliver a complete range of data warehouse and BI capabilities Faster time to value with a reduction in the time and speed associated with deploying Business Intelligence Industry-leading scalability, reliability, availability, and security Simplified and faster access to the data on System z

This IBM® RedpaperTM publication describes the concepts, functions, and practical usage of IBM Easy Tier® Heat Map Transfer (HMT). IBM System Storage® DS8000® Easy Tier is designed to automate data placement throughout the storage system disks pool. Easy Tier generates a heat map. It is a workload activity metric for each extent in a logical volume. With Easy Tier HMT, it is possible to transfer the heat map from a mirrored primary site and reapply it periodically at secondary and tertiary sites by using the Easy Tier Heat Map Transfer Utility (HMTU). This capability helps maintain storage performance after a failover to a remote site. With DS8870 Release 7.5, the heat map transfer supports Metro Global Mirror (MGM) replication topology in addition to Metro Mirror/Global Copy/Global Mirror (MM/GC/GM) functions. This paper is for those professionals who want to understand the Easy Tier HMT concept and its underlying design. It also provides guidance and practical illustrations about the operation of the HMTU. For more information about the general concept of Easy Tier, see IBM DS8000 Easy Tier, REDP-4667. For more information about Easy Tier Server and Easy Tier Application, see the following publications: IBM System Storage DS8000 Easy Tier Server, REDP-5013 DS8870 Easy Tier Application, REDP-5014

This IBM® Redbooks® publication positions the IBM PowerHA® SystemMirror® V6.1 for AIX® Enterprise Edition as the cluster management solution for high availability. This solution enables near-continuous application service and minimizes the impact of planned and unplanned outages. The primary goal of this high-availability solution is to recover operations at a remote location after a system or data center failure, establish or strengthen a business recovery plan, and provide separate recovery location. The IBM PowerHA SystemMirror Enterprise Edition is targeted at multisite high-availability disaster recovery. The objective of this book is to help new and existing PowerHA customers to understand how to plan to accomplish a successful installation and configuration of the PowerHA SystemMirror for AIX Enterprise Edition. This book emphasizes the IBM Power SystemsTM strategy to deliver more advanced functional capabilities for business resiliency and to enhance product usability and robustness through deep integration with AIX, affiliated software stack, and storage technologies. PowerHA SystemMirror is designed, developed, integrated, tested, and supported by IBM from top to bottom.

This book constitutes the refereed post-proceedings of the 9th European Performance Engineering Workshop, EPEW 2012, held in Munich, Germany, and the 28th UK Performance Engineering Workshop, UKPEW 2012, held in Edinburgh, UK, in July 2012. The 15 regular papers and one poster presentation paper presented together with 2 invited talks were carefully reviewed and selected from numerous submissions. The papers cover a wide range of topics from classical performance modeling areas such as wireless network protocols and parallel execution of scientific codes to hot topics such as energy-aware computing to unexpected ventures into ranking professional tennis players. In addition to new case studies, the papers also present new techniques for dealing with the modeling challenges brought about by the increasing complexity and scale of systems today.

This IBM® RedpaperTM publication is a comprehensive guide that covers the IBM Power 795 server that supports IBM AIX®, IBM i, and Linux operating systems. The goal of this paper is to introduce the innovative Power 795 offering and its major functions: IBM POWER7® processor, available at frequencies of 3.7 GHz and 4.0 GHz with TurboCore options of 4.25 GHz and 4.31 GHz Specialized POWER7 Level 3 cache that provides greater bandwidth, capacity, and reliability IBM PowerVM® virtualization, including PowerVM Live Partition Mobility and PowerVM IBM Active MemoryTM Sharing TurboCore mode that delivers the highest performance per core Enhanced reliability, accessibility, and serviceability (RAS) features that are designed for maximum availability Active Memory Expansion that provides more usable memory than what is physically installed on the system IBM EnergyScaleTM technology that provides features such as power trending, power-saving, capping of power, and thermal measurement Professionals who want to acquire a better understanding of IBM Power SystemsTM products can benefit from reading this paper. This paper complements the available set of IBM Power Systems documentation by providing a desktop reference that offers a detailed technical description of the Power 795 system. This paper does not replace the latest marketing materials and configuration tools. It is intended as an additional source of information that, together with existing sources, can be used to enhance your knowledge of IBM server solutions.

This IBM® RedpaperTM publication is a comprehensive guide covering the IBM Power 710 and Power 730 servers supporting AIX®, IBM i, and Linux® operating systems. The goal of this paper is to introduce the major innovative Power 710 and 730 offerings and their prominent functions, including these: The POWER7TM processor available at frequencies of 3.0 GHz, 3.55 GHz, and 3.7 GHz The specialized POWER7 Level 3 cache that provides greater bandwidth, capacity, and reliability The 1 Gb or 10 Gb Integrated Virtual Ethernet adapter, included with each server configuration, and providing native hardware virtualization PowerVMTM virtualization including PowerVM Live Partition Mobility and PowerVM Active MemoryTM Sharing Active Memory Expansion that provides more usable memory than what is physically installed on the system EnergyScaleTM technology that provides features such as power trending, power-saving, capping of power, and thermal measurement. Professionals who want to acquire a better understanding of IBM Power Systems products can benefit from reading this paper. This paper expands the current set of IBM Power Systems documentation by providing a desktop reference that offers a detailed technical description of the Power 710 and Power 730 systems. This paper does not replace the latest marketing materials and configuration tools. It is intended as an additional source of information that, together with existing sources, can be used to enhance your knowledge of IBM server solutions.