The book explores industrial applications of green solvents in industrially important areas such as oil extraction, sensors and biosensors, CO2 capture, lignocellulosic biomass utilization, bio-based chemicals and their application in catalysis, electrochemical devices, purification of pharmaceuticals, organic synthesis and transformations, bio-lubricant additives, aluminum and aluminum-alloy production. The solvents covered include water, ionic liquids, supercritical carbon dioxide and glycerol.

This book contains the lecture notes for the NATO Advanced Research Workshop on th Green Industrial Applications of Ionic Liquids held April 12th_16 , 2000 in Heraklion, Crete, Greece. This was the fIrst international meeting devoted to research in the area of ionic liquids (salts with melting points below 100 0c), and was intended to explore the promise of ionic liquids as well as to set a research agenda for the fIeld. It was the fIrst international meeting dedicated to the study and application of ionic liquids as solvents, and forty-one scientists and engineers from academia, industry, and government research laboratories (as well as six industry observers and four student assistants) met to discuss the current and future status of the application of ionic liquids to new green industrial technologies. It was immediately clear that the number of organic chemists and engineers working in the fIeld needed to be increased. It was also clear that the declining interest in high temperature molten salts and subsequent increase in low melting ionic liquid solvents had not yet taken hold in Eastern Europe. Participants from NATO Partner Countries contributed signifIcant expertise in high temperature molten salts and were able to take back a new awareness and interest in ionic liquid solvents.

Numerous solvents used in chemical processes have poisonous and unsafe properties that pose significant ecological concerns ranging from atmospheric emissions to the contamination of water effluents. To combat these ecological threats, over the course of the past two decades, the field of green chemistry has grown to develop more natural reaction processes and techniques involving the use of nonconventional solvents to diminish waste solvent production and thus decrease negative impact on the environment. Ionic liquids in particular are more environmentally friendly substitutes to conventional solvents, and as such, have seen more widespread use in the past decade. They have been used in such processes as extraction, separation, purification of organic, inorganic, and bioinorganic compounds, reaction media in biochemical and chemical catalysis, green organic and drug synthesis, among other industrial applications. Thus, in proving themselves a suitable greener media for economic viability in chemical processes, ionic liquids are leading to more sustainable development. This edition explores the application of ionic liquids as a green solvent. It contains a state-of-the-art overview on ionic liquids as green solvents for chemical processes and techniques, as well as some of their useful industrial applications.

Nanofluids for Large-Scale Industrial Applications examines the challenges and current progress towards large-scale industrial application of nanofluids, summarizing and bringing together varied current research strands and providing potential solutions pertaining to the scientific, economic, and social barriers that currently exist. Opening with an introduction to nanofluid synthesis, types, and properties, this book traverses the potential large-scale applications and commercialisation of nanofluids in industrial heating/cooling, solar energy systems, refrigeration systems, automotive systems, and various chemical processes and manufacturing systems. This book provides knowledge of a vast area of applications of nanofluids in industries. Thus, it also has potential to encourage and trigger the minds of researchers to discover more about nanofluids, investigate the gaps, overcome the challenges, and provide future directions for newer applications and develop nanofluids further. The book is written chiefly for graduate/postdoc level students and researchers/academics teaching or studying in chemical and thermal engineering and who are focused on heat transfer enhancement, thermal energy, nanofluids, and nano-enhanced energy systems such as solar thermal systems. - Examines the challenges and current progress towards implementing large-scale industrial application of nanofluids - Addresses current gaps in research, explores challenges and controversies as well as weaknesses and strengths versus alternative solutions - Aims to bridge the gap between fundamental research and potential industrial-scale utilization in the future by providing pathways towards convenient and sustainable scale-up - Meets a need to compile all current information and knowledge from studies and research related to large-scale nanofluids applications in one single resource

Green Solvents for Environmental Remediation provides an in-depth overview of environmental remediation by using eutectic solvents, ionic liquids, biosolvents, and switchable solvents, of ionic-liquids, biosolvents, Gas-expanded solvents Liquid polymers, supercritical fluids, Polymer-based green solvents, Switchable solvents, etc. This book offers all-types of green solvents for the removal of contaminations from the soil, air, and water. It summarizes in-depth literature on the application of various green solvents in the areas such as municipal water, extraction, bioremediation, phytoremediation, soil and sediment remediation, toxic gases removal, and various industrial effluents. A brief introduction, limitations, and advantages to the practical use of green solvents are also discussed. This book is authored by experts in a broad range of fields. It is an invaluable reference guide for the sustainable and environmentally friendly development of synthetic methodologies for environmental, analytical, engineering, and industrial technology. - Provides an up-to-date research record on green solvents for environmental protection - Includes latest advances in environmental remediation - Outlines eco-friendly green solvents for toxic contaminants degradation and purification - Covers all-types of green solvent-driven environmental remediation technologies - Key references to obtain great results in environmental remediation using green solvents

Nanocellulose is a versatile material that has received much attention from scientists working in a broad range of application fields, such as automotive, composites, adsorbents, paints, coatings, medical implants, electronics, cosmetics, pulp and paper, tissue engineering, medical, packaging, and aerogels. Industrial Applications of Nanocellulose and Its Nanocomposites provides an extensive, up-to-date review of this fast-moving research field. The chapters cover a wide range of aspects, including synthesis, surface modification, and improvement of properties toward target applications. The main objectives of the book are to reflect on recent advancements in the design and fabrication of advanced nanocellulose and discuss important requirements for each application, as well as the challenges that might be faced. The book also includes an overview of the current economic perspectives and safety issues, as well as future directions for nanocellulose-based materials. It will serve as a valuable reference resource for academic and industrial researchers, environmental chemists, nanotechnologists, chemical engineers, polymer chemists, materials scientists, and all those working in the manufacturing industries. - Comprehensively covers a broad range of industrial applications. - Includes case studies on economic perspectives, safety issues, and advanced development of nanocellulose-based products. - Discusses nanocellulose production from biological waste.

Green chemistry aims at reducing pollution and avoiding hazardous waste in the environment, as well as in a number of industrial applications, including chemical, pharmaceutical, paint and leather industries. The book focuses on new applications of green solvents (water, ionic liquids, supercritical carbon dioxide, terpenes) in such areas as chemical synthesis (including lipase-catalyzed reactions, organic synthesis, esterification reactions), gas separation membranes, environment-friendly products, low energy requirement processes and alternatives to hazardous substances.

This book reviews achievements in industrial chemistry and engineering, including both established and emerging areas of technology. Each of the 12 chapters provides coverage from basic science to technological principles.