In order to assess the direct influence of surface roughtness upon heat transfer andits indirect effect through the shift in transition location, a series of wind tunnel tests were carried out. A fixed body shape (with one exception) with varying roughness was tested at a series of tunnel conditions and the heat transfer measured by the thin wall calorimenter method. The wind tunnel conditions and the heat transfer distribution around the models are presented in tabular form.

Presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Indianapolis, Indiana, June 7-10, 1999.

A discussion is presented on the transition phenomena associated with distributed roughness, a correlation of three-dimensional roughness effects at both subsonic and supersonic speeds, and the effect of laminar boundary-layer stability as influenced by heat transfer, pressure gradients, and boundary-layer control on the sensitivity of laminar flow to distributed roughness. Results indicate that the transition-triggering mechanism of three-dimensionaltype surface roughness appears to be the same at supersonic and subsonic speeds. In either case, a Reynolds number based on the height of the roughness and the local flow conditions at the top of the roughness can be used to predict with reasonable accuracy the height of threedimensional roughness required to cause premature transition. Neither the three-dimensional roughness Reynolds number nor the lateral spread of turbulence behind the roughness is changed to any important extent by increasing the laminar boundary-layer stability to theoretically small disturbances. Therefore, for a given stream Mach number and Reynolds number, surface cooling, boundary-layer suction, or a favorable pressure gradient will, in the presence of three-dimensional roughness, promote rather than delay transition. (Author).

Volume V of the High Speed Aerodynamics and Jet Propulsion series. Topics include transition from laminar to turbulent flow; turbulent flow; statistical theories of turbulence; conduction of heat; convective heat transfer and friction in flow of liquids; convective heat transfer in gases; cooling by protective fluid films; physical basis of thermal radiation; and engineering calculations of radiant heat exchange. Originally published in 1959. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.

Second Enhanced Edition Suitable for advanced-level courses or an independent study in fluid mechanics, this text by an expert in the field provides the basic aspects of laminar-to-turbulent flow transition in boundary layers. Logically organized into three major parts, the book covers pre- and post-transitional flow, transitional flow, and several advanced topics in periodically disturbed transitional flow. Some of the subjects covered within the book include high-frequency unsteady laminar flow, turbulent flow, natural transition, bypass transition, turbulent spot theory, turbulent spot kinematics and production, correlations for the onset and rate of transition, global and conditional averaging, transitional flow models, wakeinduced transition, multimode transition, and separated-flow transition. Containing some 202 figures (all drawn by the author), 28 tables, 12 appendices, a supplement on tensors, and an extensive bibliography, the 415 page book provides a wealth of data and information about the subject.