This book reports on intelligent methods and solutions in engineering production and maintenance. It describes advanced tools for optimizing production processes, increasing their automation, safety and sustainability. Contributions cover different stages of the production process, such as product design, supply chain, and equipment maintenance and safety. This is one of the two volumes based on the 4th International Conference on Intelligent Systems in Production Engineering and Maintenance, ISPEM 2023, held on September 13-15, 2023, in Wroclaw, Poland.

The volume presents a collection of 44 peer-reviewed articles from the First International Conference on Intelligent Systems in Production Engineering and Maintenance (ISPEM 2017). ISPEM 2017 was organized by the Faculty of Mechanical Engineering, Wrocław University of Science and Technology and was held in Wrocław (Poland) on 28–29 September 2017. The main topics of the conference included the possibility of using widely understood intelligent methods in production engineering. New solutions for innovative plants, research results and case studies taking into account advances in production and maintenance from the point of view of Industry 4.0 were presented and discussed—with special attention paid to applications of intelligent systems, methods and tools in production engineering, maintenance, logistics, quality management, information systems, and product development. The volume is divided into two parts: 1. Intelligent Systems in Production Engineering 2. Intelligent Systems in Maintenance This book is an excellent reference resource for scientists in the field of manufacturing engineering and for top managers in production enterprises.

The book presents a collection of 103 peer-reviewed articles from the Second International Conference on Intelligent Systems in Production Engineering and Maintenance (ISPEM 2018). The conference was organized by the Faculty of Mechanical Engineering and CAMT (Centre for Advanced Manufacturing Technologies), Wrocław University of Science and Technology and was held in Wrocław (Poland) on 17–18 September 2018. The conferences topics included the possibility of using a wide range of intelligent methods in production engineering, presenting and discussing new solutions for innovative plants, research findings and case studies demonstrating advances in production and maintenance from the point of view of Industry 4.0 – particularly applications of intelligent systems, methods and tools in production engineering, maintenance, logistics, quality management, information systems and product development. The book is divided into two parts: the first includes papers related to intelligent systems in production engineering, while the second is dedicated to special sessions focusing on: 1. Computer Aided methods in Production Engineering 2. Mining 4.0 and Intelligent Mining Transportation 3. Modelling and Simulation of Production Processes 4. Multi-Faceted Modelling of Networks and Processes 5. Product Design and Product Manufacturing in Industry 4.0 This book is an excellent source of information for scientists in the field of manufacturing engineering and for top managers in production enterprises.

This book discusses three key aspects of business operations: sustainability, human factors, and smart manufacturing, which make up modern business. The authors share their experiences in the transformation of enterprises to Industry 4.0/5.0 and the sustainability of steel production, as well as the reorganization of human factors using the example of the steel sector. The steel industry is covered both from a global perspective (key producers in the global steel market), as well as from a local and sectoral perspective (the companies that make up the sector of metal and metal product producers, using Poland as an example). This insightful book discusses how the steel industry can develop intelligent solutions to enhance sustainable performance and the challenges they must overcome, including policy and regulation. Case studies evaluate how steel companies are investing in new technologies that meet environmental requirements but also human resource development to enhance digital skills and competencies of the workforce. The book will find an audience across disciplines but be of particular value to scholars of industrial, operations, and technology management.

This book offers a timely yet comprehensive snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as cutting, grinding, assembly, and coatings, including ultrasonic treatment, molding, radial-isostatic compression, ionic-plasma deposition, volumetric vibration treatment, and wear resistance. It also highlights the advantages of augmented reality, RFID technology, reverse engineering, optimization, heat and mass transfer, energy management, quality inspection, and environmental impact. Based on selected papers presented at the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2020), held in Odessa, Ukraine, on September 8–11, 2020, this book offers a timely overview and extensive information on trends and technologies in production planning, design engineering, advanced materials, machining processes, process engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and offer a bridge between academic and industrial researchers.

This book covers a wide range of management issues, concerning planning, control and continuous improvement. It especially focuses on the management of the enterprise and production processes in the era of globalization, discussing the process of transferring production to developing countries, covering issues in technological culture, and reporting on quality control issues and on problems related to continuous process improvement. Modern strategies such as Six Sigma and lean manufacturing are also discussed. Another topic concerns the management of the education sphere, and how to develop the latter to prepare employees to the changes brought by the technical development. Based on papers presented at the 6th International Scientific-Technical Conference MANUFACTURING 2019, held in Poznan, Poland on May 19–22, 2019, this book bridges issues in quality engineering with concepts of ergonomics and sociology, thus offering a timely, practice-oriented guide to both the engineers and managers of the future.

This book forms an excellent basis for the development of intelligent manufacturing system for Industry 4.0, digital and distributed manufacturing, and factories for future. This book of new developments and advancement in intelligent control and optimization system for production engineering serves as a good companion to scholars, manufacturing companies, and RTO to improve the efficiency of production systems.

This book covers a variety of topics in the field of mechanical engineering, with a special focus on methods and technologies for modeling, simulation, and design of mechanical systems. Based on a set of papers presented at the 2nd International Conference “Innovation in Engineering”, ICIE, held in Minho, Portugal, on June 28–30, 2022, it focuses on innovation in mechanical engineering, spanning from advanced materials and composites, optimization of manufacturing and production processes, and converging issues and technologies in additive manufacturing and industry 4.0. It covers applications in the transport and automotive, and medical and education sector, among others. This book, which belongs to a three-volume set, provides engineering researchers and professionals with extensive and timely information on new technologies and developments in the field of mechanical engineering and materials.

The book presents the proceedings of the 7th EAI International Conference on Management of Manufacturing Systems (MMS 2022), which took place in Krynica-Zdrój, Poland, 05-07 October 2022. The conference covers the management of manufacturing systems with support for Industry 4.0, logistics and intelligent manufacturing systems and applications, cooperation management, and its effective applications. Topics include RFID applications, economic impacts in logistics, ICT support for Industry 4.0, industrial and smart logistics, intelligent manufacturing systems and applications, and much more. The topic is of interest to researchers, practitioners, students, and academics in manufacturing and communications engineering. Presents the proceedings of the 7th EAI International Conference on Management of Manufacturing Systems (MMS 2022); Covers topics such as Industry 4.0, smart logistics, smart cities, and intelligent manufacturing; Relevant for researchers, academics, and professionals.