This open access book compiles the research results of the Collaborative Research Center SFB 837, which has been running since 2010 and will end in 2022, with the topic "Interaction Modeling in Mechanized Tunneling". The Collaborative Research Center is funded by the German Research Foundation (DFG) and is currently the world's largest research facility in the field of tunneling. The aim of the publication is to make our scientific findings accessible to the international professional community. The individual chapters deal with all subsystems relevant in mechanized tunneling and their interaction. The latest results of digital planning and real-time tunneling support have been included.

Expanding Underground - Knowledge and Passion to Make a Positive Impact on the World contains the contributions presented at the ITA-AITES World Tunnel Congress 2023 (Athens, Greece, 12 – 18 May, 2023). Tunnels and underground space are a predominant engineering practice that can provide sustainable, cost-efficient and environmentally friendly solutions to the ever-growing needs of modern societies. This underground expansion in more diverse and challenging infrastructure types or to novel underground uses can foster the changes needed. At the same time, the tunneling and underground space community needs to be better prepared and equipped with knowledge, tools and experience, to deal with the prevailing conditions, to successfully challenge and overcome adversities on this path. The papers in this book aim at contributing to the analysis of challenging conditions, the presentation and dissemination good practices, the introduction of new concepts, new tools and innovative elements that can help engineers and all stakeholders to reach their end goals. Expanding Underground - Knowledge and Passion to Make a Positive Impact on the World covers a wide range of aspects and topics related to the whole chain of the construction and operation of underground structures: Knowledge and Passion to Expand Underground for Sustainability and Resilience Geological, Geotechnical Site Investigation and Ground Characterization Planning and Designing of Tunnels and Underground Structures Mechanised Tunnelling and Microtunnelling Conventional Tunnelling, Drill-and-Blast Applications Tunnelling in Challenging Conditions - Case Histories and Lessons Learned Innovation, Robotics and Automation BIM, Big Data and Machine Learning Applications in Tunnelling Safety, Risk and Operation of Underground Infrastructure, and Contractual Practices, Insurance and Project Management The book is a must-have reference for all professionals and stakeholders involved in tunneling and underground space development projects.

In the last two decades, the biannual ECPPM (European Conference on Product and Process Modelling) conference series has provided a unique platform for the presentation and discussion of the most recent advances with regard to the ICT (Information and Communication Technology) applications in the AEC/FM (Architecture, Engineering, Construction and Facilities Management) domains. ECPPM 2014, the 10th European Conference on Product and Process Modelling, was hosted by the Department of Building Physics and Building Ecology of the Vienna University of Technology, Austria (17-19 September 2014). This book entails a substantial number of high-quality contributions that cover a large spectrum of topics pertaining to ICT deployment instances in AEC/FM, including: - BIM (Building Information Modelling) - ICT in Civil engineering & Infrastructure - Human requirements & factors - Computational decision support - Commissioning, monitoring & occupancy - Energy & management - Ontology, data models, and IFC (Industry Foundation Classes) - Energy modelling - Thermal performance simulation - Sustainable buildings - Micro climate modelling - Model calibration - Project & construction management - Data & information management As such, eWork and eBusiness in Architecture, Engineering and Construction 2014 represents a rich and comprehensive resource for academics and professionals working in the interdisciplinary areas of information technology applications in architecture, engineering, and construction.

Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art contains the contributions presented at the World Tunnel Congress 2019 (Naples, Italy, 3-9 May 2019). The use of underground space is continuing to grow, due to global urbanization, public demand for efficient transportation, and energy saving, production and distribution. The growing need for space at ground level, along with its continuous value increase and the challenges of energy saving and achieving sustainable development objectives, demand greater and better use of the underground space to ensure that it supports sustainable, resilient and more liveable cities. This vision was the source of inspiration for the design of the logos of both the International (ITA) and Italian (SIG) Tunnelling Association. By placing key infrastructures underground – the black circle in the logos – it will be possible to preserve and enhance the quality of the space at ground level – the green line. In order to consider and value underground space usage together with human and social needs, engineers, architects, and artists will have to learn to collaborate and develop an interdisciplinary design approach that addresses functionality, safety, aesthetics and quality of life, and adaptability to future and varied functions. The 700 contributions cover a wide range of topics, from more traditional subjects connected to technical challenges of design and construction of underground works, with emphasis on innovation in tunneling engineering, to less conventional and archetypically Italian themes such as archaeology, architecture, and art. The book has the following main themes: Archaeology, Architecture and Art in underground construction; Environment sustainability in underground construction; Geological and geotechnical knowledge and requirements for project implementation; Ground improvement in underground constructions; Innovation in underground engineering, materials and equipment; Long and deep tunnels; Public communication and awareness; Risk management, contracts and financial aspects; Safety in underground construction; Strategic use of underground space for resilient cities; Urban tunnels. Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art is a valuable reference text for tunneling specialists, owners, engineers, architects and others involved in underground planning, design and building around the world, and for academics who are interested in underground constructions and geotechnics.

Effective measurement of the composition and properties of petroleum is essential for its exploration, production, and refining; however, new technologies and methodologies are not adequately documented in much of the current literature. Analytical Methods in Petroleum Upstream Applications explores advances in the analytical methods and instrumentation that allow more accurate determination of the components, classes of compounds, properties, and features of petroleum and its fractions. Recognized experts explore a host of topics, including: A petroleum molecular composition continuity model as a context for other analytical measurements A modern modular sampling system for use in the lab or the process area to collect and control samples for subsequent analysis The importance of oil-in-water measurements and monitoring The chemical and physical properties of heavy oils, their fractions, and products from their upgrading Analytical measurements using gas chromatography and nuclear magnetic resonance (NMR) applications Asphaltene and heavy ends analysis Chemometrics and modeling approaches for understanding petroleum composition and properties to improve upstream, midstream, and downstream operations Due to the renaissance of gas and oil production in North America, interest has grown in analytical methods for a wide range of applications. The understanding provided in this text is designed to help chemists, geologists, and chemical and petroleum engineers make more accurate estimates of the crude value to specific refinery configurations, providing insight into optimum development and extraction schemes.

Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems comprises 330 papers that were presented at the Eighth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022, Cape Town, South Africa, 5-7 September 2022). The topics featured may be clustered into six broad categories that span the themes of mechanics, modelling and engineering design: (i) mechanics of materials (elasticity, plasticity, porous media, fracture, fatigue, damage, delamination, viscosity, creep, shrinkage, etc); (ii) mechanics of structures (dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) numerical modelling and experimental testing (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber); (v) innovative concepts, sustainable engineering and special structures (nanostructures, adaptive structures, smart structures, composite structures, glass structures, bio-inspired structures, shells, membranes, space structures, lightweight structures, etc); (vi) the engineering process and life-cycle considerations (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). Two versions of the papers are available: full papers of length 6 pages are included in an e-book, while short papers of length 2 pages, intended to be concise but self-contained summaries of the full papers, are in this printed book. This work will be of interest to civil, structural, mechanical, marine and aerospace engineers, as well as planners and architects.

The EURO-C conference series (Split 1984, Zell am See 1990, Innsbruck 1994, Badgastein 1998, St. Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St. Anton am Arlberg 2014, and Bad Hofgastein 2018) brings together researchers and practising engineers concerned with theoretical, algorithmic and validation aspects associated with computational simulations of concrete and concrete structures. Computational Modelling of Concrete Structures reviews and discusses research advancements and the applicability and robustness of methods and models for reliable analysis of complex concrete, reinforced concrete and pre-stressed concrete structures in engineering practice. The contributions cover both computational mechanics and computational modelling aspects of the analysis and design of concrete and concrete structures: Multi-scale cement and concrete research: experiments and modelling Aging concrete: from very early ages to decades-long durability Advances in material modelling of plain concrete Analysis of reinforced concrete structures Steel-concrete interaction, fibre-reinforced concrete, and masonry Dynamic behaviour: from seismic retrofit to impact simulation Computational Modelling of Concrete Structures is of special interest to academics and researchers in computational concrete mechanics, as well as industry experts in complex nonlinear simulations of concrete structures.

Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering.

Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering. This is volume 2 of the NUMGE 2018 set.

This volume provides a timely survey of interactions between the calculus of variations and theoretical and applied mechanics. Chapters have been significantly expanded since preliminary versions appeared in a special issue of the Journal of Optimization Theory and Applications (184(1), 2020) on “Calculus of Variations in Mechanics and Related Fields”. The variety of topics covered offers researchers an overview of problems in mechanics that can be analyzed with variational techniques, making this a valuable reference for researchers in the field. It also presents ideas for possible future areas of research, showing how the mastery of these foundational mathematical techniques can be used for many exciting applications. Specific topics covered include: Topology optimization Identification of material properties Optimal control Plastic flows Gradient polyconvexity Obstacle problems Quasi-monotonicity Variational Views in Mechanics will appeal to researchers in mathematics, solid-states physics, and mechanical, civil, and materials engineering.