Mechanical engineering, an engineering discipline born of the needs of the industrial revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face profound issues of productivity and competitiveness that require engineering solutions, among others. The Mechanical Engineering Series is a series featuring graduate texts and research monographs intended to address the need for information in contemporary areas of mechanical engineering. The series is conceived as a comprehensive one that covers a broad range of concentrations important to mechanical engineering graduate education and research. We are fortunate to have a distinguished roster of consulting editors, each an expert in one of the areas of concentration. The names of the consulting editors are listed on the following page of this volume. The areas of concentration are applied mechanics, biomechanics, computational mechanics, dynamic systems and control, energetics, mechanics of materials, processing, thermal science, and tribology. Professor Winer, the consulting editor for tribology, and I are pleased to present this volume of the series: Laminar Viscous Flow, by Professor Constantinescu. The selection of this volume underscores again the interest of the Mechanical Engineering Series to provide our readers with topical monographs as well as graduate texts.

The Boundary Element Method has now become a powerful tool of engineering analysis and is routinely applied for the solution of elastostatics and potential problems. More recently research has concentrated on solving a large variety of non-linear and time dependent applications and in particular the method has been developed for viscous fluid flow problems. This book presents the state of the art on the solution of viscous flow using boundary elements and discusses different current approaches which have been validated by numerical experiments. . Chapter 1 of the book presents a brief review of previous work on viscous flow simulation and in particular gives an up-to-date list of the most important BEM references in the field. Chapter 2 reviews the governing equations for general viscous flow, including compressibility. The authors present a compre hensive treatment of the different cases and their formulation in terms of boundary integral equations. This work has been the result of collaboration between Computational Mechanics Institute of Southampton and Massa chusetts Institute of Technology researchers. Chapter 3 describes the gen eralized formulation for unsteady viscous flow problems developed over many years at Georgia Institute of Technology. This formulation has been extensively applied to solve aer09ynamic problems.

The GAMM-Commi ttee for Numerical Methods in Fluid Mechanics (GAMM-Fachausschuss für Numerische Methoden in der Strömungsmechanik) has sponsored the organization of a GAMM Workshop dedicated to the numerical simulation of three dimensional incompressible unsteady viscous laminar flows to test Navier-Stokes solvers. The Workshop was held in Paris from June 12th to June 14th, 1991 at the Ecole Nationale Superieure des Arts et Metiers. Two test problems were set up. The first one is the flow in a driven-lid parallelepipedic cavity at Re = 3200 . The second problem is a flow around a prolate spheroid at incidence. These problems are challenging as fully transient solutions are expected to show up. The difficulties for meaningful calculations come from both space and temporal discretizations which have to be sufficiently accurate to resol ve detailed structures like Taylor-Görtler-like vortices and the appropriate time development. Several research teams from academia and industry tackled the tests using different formulations (veloci ty-pressure, vortici ty velocity), different numerical methods (finite differences, finite volumes, finite elements), various solution algorithms (splitting, coupled ...), various solvers (direct, iterative, semi-iterative) with preconditioners or other numerical speed-up procedures. The results show some scatter and achieve different levels of efficiency. The Workshop was attended by about 25 scientists and drove much interaction between the participants. The contributions in these proceedings are presented in alphabetical order according to the first author, first for the cavi ty problem and then for the prolate spheroid problem. No definite conclusions about benchmark solutions can be drawn.

In recent years, the performance of digital computers has been improved by the rapid development of electronics at remarkable speed. In addition, substantial research has been carried out in developing numerical analysis techniques. Nowadays, a variety of problems in the engineering and scientific fields can be solved by using not only super computers but also personal computers. After the first book titled "Boundary Element" was published by Brebbia in 1978, the boundary element method (BEM) has been recognized as a powerful numerical technique which has some advantages over the finite difference method (FDM) and finite element method (FEM). A great amount of research has been carried out on the applications of BEM to various problems. The numerical analysis of fluid mechanics and heat transfer problems plays a key role in analysing some phenomena and it has become recognized as a new research field called "Computational Fluid Dynamics". In partic ular, the analysis of viscous flow including thermal convection phenomena is one of the most important problems in engineering fields. The FDM and FEM have been generally .applied to solve these problems because of non singularities of governing equations.

Most of the fundamental concepts of unsteady viscous flows have been known since the early part of the century. However, the past decade has seen an unprecedented number of publications in this area. In this monograph I try to connect materials of earlier contributions and synthesize them into a comprehensive entity. One of the main purposes of a monograph, in my opinion, is to fit together in a comprehensive way scattered contributions that provide fragmented information to the readers. The collection of such contributions should be presented in a unified way; continuity of thought and logical sequence of the presentation of ideas and methods are essential. The reader should be able to follow through without having to resort to other references, something that is unavoidable in the case of a research paper or even a review paper. Many of the solutions discussed in the literature address specific practical problems. In fact, in the process of collecting information, I discovered independent lines of investigations, dealing with the same physical problem, but inspired by different practical applications. For example, I found that two groups of investigators have been studying independently the response of a viscous layer to a harmonic external disturbance. One group is con cerned with mass transport and the transport of sediment over the bottom of the ocean, and the other is interested in the aerodynamics of lifting surfaces in harmonically changing environments.

Viscous flow is treated usually in the frame of boundary-layer theory and as two-dimensional flow. Books on boundary layers give at most the describing equations for three-dimensional boundary layers, and solutions often only for some special cases. This book provides basic principles and theoretical foundations regarding three-dimensional attached viscous flow. Emphasis is put on general three-dimensional attached viscous flows and not on three-dimensional boundary layers. This wider scope is necessary in view of the theoretical and practical problems to be mastered in practice. The topics are weak, strong, and global interaction, the locality principle, properties of three-dimensional viscous flow, thermal surface effects, characteristic properties, wall compatibility conditions, connections between inviscid and viscous flow, flow topology, quasi-one- and two-dimensional flows, laminar-turbulent transition and turbulence. Though the primary flight speed range is that of civil air transport vehicles, flows past other flying vehicles up to hypersonic speeds are also considered. Emphasis is put on general three-dimensional attached viscous flows and not on three-dimensional boundary layers, as this wider scope is necessary in view of the theoretical and practical problems that have to be overcome in practice. The specific topics covered include weak, strong, and global interaction; the locality principle; properties of three-dimensional viscous flows; thermal surface effects; characteristic properties; wall compatibility conditions; connections between inviscid and viscous flows; flow topology; quasi-one- and two-dimensional flows; laminar-turbulent transition; and turbulence. Detailed discussions of examples illustrate these topics and the relevant phenomena encountered in three-dimensional viscous flows. The full governing equations, reference-temperature relations for qualitative considerations and estimations of flow properties, and coordinates for fuselages and wings are also provided. Sample problems with solutions allow readers to test their understanding.

Fluid mechanics is a core component of many undergraduate engineering courses. It is essential for both students and lecturers to have a comprehensive, highly illustrated textbook, full of exercises, problems and practical applications to guide them through their study and teaching. Engineering Fluid Mechanics By William P. Grabel is that book The ISE version of this comprehensive text is especially priced for the student market and is an essential textbook for undergraduates (particularly those on mechanical and civil engineering courses) designed to emphasis the physical aspects of fluid mechanics and to develop the analytical skills and attitudes of the engineering student. Example problems follow most of the theory to ensure that students easily grasp the calculations, step by step processes outline the procedure used, so as to improve the students' problem solving skills. An Appendix is included to present some of the more general considerations involved in the design process. The author also links fluid mechanics to other core engineering courses an undergraduate must take (heat transfer, thermodynamics, mechanics of materials, statistics and dynamics) wherever possible, to build on previously learned knowledge.

Representing a unique approach to the study of fluid flows, Viscous Flows demonstrates the utility of theoretical concepts and solutions for interpreting and predicting fluid flow in practical applications. By critically comparing all relevant classes of theoretical solutions with experimental data and/or general numerical solutions, it focuses on the range of validity of theoretical expressions rather than on their intrinsic character. This book features extensive use of dimensional analysis on both models and variables, and extensive development of theoretically based correlating equations. The range of applicability of most theoretical solutions is shown to be quite limited; however, in combination they are demonstrated to be more reliable than purely empirical expressions, particularly in novel applications.

Optimization methodologies are fundamental instruments to tackle the complexity of today's engineering processes. Engineering Optimization 2014 is dedicated to optimization methods in engineering, and contains the papers presented at the 4th International Conference on Engineering Optimization (ENGOPT2014, Lisbon, Portugal, 8-11 September 2014). The book will be of interest to engineers, applied mathematicians, and computer scientists working on research, development and practical applications of optimization methods in engineering.

Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.