This book constitutes the refereed proceedings of the 18th IFIP/IEEE International Workshop on Distributed Systems, Operations and Management, DSOM 2007, held in the course of the 3rd International Week on Management of Networks and Services, Manweek 2007. It covers peer-to-peer management, fault detection and diagnosis, performance tuning and dimensioning, problem detection and mitigation, operations and tools, service accounting and auditing, Web services and management.

This comprehensive new resource presents applications of MEF’s (Metro Ethernet Forum) Carrier Ethernet architecture and provides insight into building end-to-end systems with third network services like MPLS-TP, VPLS, and PBT. This book includes new use cases and explores the new MEF/CEN specifications, services, and applications. While providing a look into lifecycle service orchestration (LSO), virtualization, and cloud series, this book highlights the pros and cons of these technologies for service providers and enterprise network owners. Pseudowires architectures, control planes, mutisegment architecture, and multisegment pseudowire setup mechanisms are explained. Ethernet protection is explored, including Automatic Protection Switching (APS) entities, linear protection, ring protection, and link aggregations. This book covers Carrier Ethernet Traffic Management, Carrier Ethernet Operation Administration Management and Performance (OAMP), Circuit Emulation Services (CES), and Carrier Ethernet Local Management Interface (E-LIM). Full chapters on Provider Bridges (PB), Provider Backbone Bridges (PBB), Provider Backbone Transport (PBT), and information modeling are also included in this invaluable resource.

A horizontal view of newly emerged technologies in the field of network function virtualization (NFV), introducing the open source implementation efforts that bring NFV from design to reality This book explores the newly emerged technique of network function virtualization (NFV) through use cases, architecture, and challenges, as well as standardization and open source implementations. It is the first systematic source of information about cloud technologies' usage in the cellular network, covering the interplay of different technologies, the discussion of different design choices, and its impact on our future cellular network. Network Function Virtualization: Concepts and Applicability in 5G Networks reviews new technologies that enable NFV, such as Software Defined Networks (SDN), network virtualization, and cloud computing. It also provides an in-depth investigation of the most advanced open source initiatives in this area, including OPNFV, Openstack, and Opendaylight. Finally, this book goes beyond literature review and industry survey by describing advanced research topics such as service chaining, VNF orchestrations, and network verification of NFV systems. In addition, this resource: Introduces network function virtualization (NFV) from both industrial and academic perspectives Describes NFV's usage in mobile core networks, which is the essence of 5G implementation Offers readers a deep dive on NFV's enabling techniques such as SDN, virtualization, and cloud computing Network Function Virtualization: Concepts and Applicability in 5G Networks is an ideal book for researchers and university students who want to keep up with the ever-changing world of network function virtualization.

An unprecedented look into the present and future of next generation networks, services, and management in the telecommunications industry The telecommunications industry has advanced in rapid, significant, and unpredictable ways into the twenty-first century. Next Generation Telecommunications Networks, Services, and Management guides the global industry and academia even further by providing an in-depth look at current and developing trends, as well as examining the complex issues of developing, introducing, and managing cutting-edge telecommunications technologies. This is an orchestrated set of original chapters written expressly for this book by topic experts from around the globe. It addresses next generation technologies and architectures, with the focus on networks, services, and management. Key topics include: Opportunities and challenges of next generation telecommunications networks, services, and management Tri/Quad Play and IP-based networks and services Fault, Configuration, Accounting, Performance, and Security (FCAPS) requirements Convergence and an important convergence vehicle, IP Multimedia Subsystem (IMS) Next generation operations and network management architecture Ad hoc wireless and sensor networks and their management Next generation operations and network management standards from a strategic perspective A defining look at the future in this field This book will serve as a contemporary reference for the growing global community of telecommunication and information professionals in industry, government, and academia. It will be important to faculty and graduate students of telecommunications as a graduate textbook.

This handbook introduces the basic principles and fundamentals of cyber security towards establishing an understanding of how to protect computers from hackers and adversaries. The highly informative subject matter of this handbook, includes various concepts, models, and terminologies along with examples and illustrations to demonstrate substantial technical details of the field. It motivates the readers to exercise better protection and defense mechanisms to deal with attackers and mitigate the situation. This handbook also outlines some of the exciting areas of future research where the existing approaches can be implemented. Exponential increase in the use of computers as a means of storing and retrieving security-intensive information, requires placement of adequate security measures to safeguard the entire computing and communication scenario. With the advent of Internet and its underlying technologies, information security aspects are becoming a prime concern towards protecting the networks and the cyber ecosystem from variety of threats, which is illustrated in this handbook. This handbook primarily targets professionals in security, privacy and trust to use and improve the reliability of businesses in a distributed manner, as well as computer scientists and software developers, who are seeking to carry out research and develop software in information and cyber security. Researchers and advanced-level students in computer science will also benefit from this reference.

The software and networking industry is experiencing a rapid development and deployment of Network Functions Visualization (NFV) technology, in both enterprise and cloud data center networks. One of the primary reasons for this technological trend is that NFV has the capability to reduce CAPEX and OPEX, whilst increasing networking service efficiency, performance, agility, scalability, and resource utilization. Despite such well-recognized benefits, security remains a major concern of network service providers and seriously impedes the further expansion of NFV. This book is therefore dedicated to investigating and exploring the potential security issues of NFV. It contains three major elements: a thorough overview of the NFV framework and architecture, a comprehensive threat analysis aiming to establish a layer-specific threat taxonomy for NFV enabled networking services, and a series of comparative studies of security best practices in traditional networking scenarios and in NFV, ultimately leading to a set of recommendations on security countermeasures in NFV. This book is primarily intended for engineers, engineering students and researchers and those with an interest in the field of networks and telecommunications (architectures, protocols, services) in general, and particularly software-defined network (SDN) and network functions virtualization (NFV)-based security services. - Extensively studies security issues in NFV - Presents a basis or guideline for both academia researchers and industry practitioners to work together to achieve secure and dependable lifecycle management of NFV based network services

Network Function Virtualization provides an architectural, vendor-neutral level overview of the issues surrounding the large levels of data storage and transmission requirements needed for today's companies, also enumerating the benefits of NFV for the enterprise. Drawing upon years of practical experience, and using numerous examples and an easy-to-understand framework, authors Tom Nadeau and Ken Gary discuss the relevancy of NFV and how it can be effectively used to create and deploy new services. Readers will learn how to determine if network function virtualization is right for their enterprise network, be able to use hands-on, step-by-step guides to design, deploy, and manage NFV in an enterprise, and learn how to evaluate all relevant NFV standards, including ETSI, IETF, Openstack, and Open Daylight. - Provides a comprehensive overview of Network Function Virtualization (NFV) - Discusses how to determine if network function virtualization is right for an enterprise network - Presents an ideal reference for those interested in NFV Network Service Chaining, NSC network address translation (NAT), firewalling, intrusion detection, domain name service (DNS), caching, and software defined networks - Includes hands-on, step-by-step guides for designing, deploying, and managing NFV in the enterprise - Explains, and contrasts, all relevant NFV standards, including ETSI, IETF, Openstack, and Open Daylight

The advancement of technology is a standard of modern daily life, whether it be the release of a new cellphone, computer, or a self-driving car. Due to this constant advancement, the networks on which these technologies operate must advance as well. Innovations in Software-Defined Networking and Network Functions Virtualization is a critical scholarly publication that observes the advances made in network infrastructure through achieving cost efficacy while maintaining maximum flexibility for the formation and operation of these networks. Featuring coverage on a broad selection of topics, such as software-defined storage, openflow controller, and storage virtualization, this publication is geared toward professionals, computer engineers, academicians, students, and researchers seeking current and relevant research on the advancements made to network infrastructures.

The Virtual I/O Server (VIOS) is part of the IBM PowerVM® feature on IBM® Power SystemsTM and part of the IBM POWER® HypervisorTM. The VIOS is also supported on IBM BladeCenter®. The server is a single-function appliance that is in the logical partition (LPAR) of the Power Systems server. The VIOS facilitates the sharing of physical I/O resources between client partitions (IBM AIX®, IBM i, and Linux) within the server. The Virtual I/O Server provides a virtual SCSI target, N_Port ID Virtualization (NPIV) target, and Shared Ethernet Adapter (SEA) virtual I/O function to client LPARs. The Virtual I/O Server has the capability of a hardware management function, the Integrated Virtualization Manager (IVM). IVM is a simplified hardware management solution that inherits most of the Hardware Management Console (HMC) features. The console manages a single server, avoiding the need of a dedicated personal computer. This device is designed to provide a solution that enables the administrator to reduce system setup time and to make hardware management easier, at a lower cost. IVM provides a management model for a single system. Although it does not offer all of the HMC capabilities, it enables the exploitation of PowerVM technology. IVM targets the small and medium systems that are best suited for this product. IVM provides the following functions: - Shared Storage Pool - IBM Active MemoryTM Sharing (AMS) - Live Partition Mobility (LPM) - Task manager monitor for long-running tasks - Security additions such as viosecure and firewall, and other improvements There are many environments where there is the need for small partitioned systems, either for test reasons or for specific requirements, for which the HMC solution is not ideal. A sample situation is where there are small partitioned systems that cannot share a common HMC because they are in multiple locations. In these cases, IVM works. Using IVM, companies can more cost-effectively consolidate multiple partitions onto a single server. With its intuitive, browser-based interface, the IVM is easy to use and significantly reduces the time and effort that is required to manage virtual devices and partitions. This IBM RedpaperTM publication provides an introduction to IVM by describing its architecture and showing how to install and configure a partitioned server by using its capabilities. This document is intended for IT personnel who have a complete understanding of partitioning before reading this document.