The Manual of Biocorrosion explains the microbiology, electrochemistry, and surface phenomena involved in biocorrosion and biofouling processes. Written primarily for non-specialists, the information in this manual is practical and offers a comprehensive look at the three components of biocorrosion: the microorganisms, the metal, and the aqueous environment. It also addresses methods for the monitoring, prevention, and control of biocorrosion. The first part of the book covers the fundamental aspects of microbiology, electrochemistry, and biofouling of metal surfaces. The second half describes biocorrosion assessment in the laboratory and the field, the main control and mitigation procedures used, practical case studies, and laboratory methods and formulations. The Manual of Biocorrosion is the book the industrial sector (water treatment plants, oil refineries, etc.) has been waiting for, providing the basics for implementing prevention, control, and mitigation procedures. In addition, it covers the latest industry trends with discussions of biocide selection, strategies for treating biocorrosion without harming the environment, and the latest monitoring programs. The academic sector will benefit as well from the up-to-date information on mechanisms and recent advances in all biocorrosion aspects and technology. Research trends such as the application of surface analysis techniques and modern electron microscopy, the use of conventional and innovative electrochemical techniques for assessment, and microbial inhibition of corrosion are all considered. Features 100 illustrations provide you with a visual understanding of the problems and techniques discussed 30 tables give you quick access to data 46 suggested readings provide references on books, conference and workshop proceedings, and special issues of scientific journals and technical publications specifically devoted to biocorrosion and biofouling 454 reference

The Manual of Biocorrosion explains the microbiology, electrochemistry, and surface phenomena involved in biocorrosion and biofouling processes. Written primarily for non-specialists, the information in this manual is practical and offers a comprehensive look at the three components of biocorrosion: the microorganisms, the metal, and the aqueous environment. It also addresses methods for the monitoring, prevention, and control of biocorrosion. The first part of the book covers the fundamental aspects of microbiology, electrochemistry, and biofouling of metal surfaces. The second half describes biocorrosion assessment in the laboratory and the field, the main control and mitigation procedures used, practical case studies, and laboratory methods and formulations. The Manual of Biocorrosion is the book the industrial sector (water treatment plants, oil refineries, etc.) has been waiting for, providing the basics for implementing prevention, control, and mitigation procedures. In addition, it covers the latest industry trends with discussions of biocide selection, strategies for treating biocorrosion without harming the environment, and the latest monitoring programs. The academic sector will benefit as well from the up-to-date information on mechanisms and recent advances in all biocorrosion aspects and technology. Research trends such as the application of surface analysis techniques and modern electron microscopy, the use of conventional and innovative electrochemical techniques for assessment, and microbial inhibition of corrosion are all considered. Features 100 illustrations provide you with a visual understanding of the problems and techniques discussed 30 tables give you quick access to data 46 suggested readings provide references on books, conference and workshop proceedings, and special issues of scientific journals and technical publications specifically devoted to biocorrosion and biofouling 454 reference

Biocorrosion refers to corrosion influenced by bacteria adhering to surfaces in biofilms. Biocorrosion is a major problem in areas such as cooling systems and marine structures where biofilms can develop. This book summarises key recent research in this subject. Part one looks at theories of biocorrosion and measurement techniques. Part two discusses how bacteria and biofilms result in biocorrosion. The final part of the book includes case studies of biocorrosion in areas as diverse as buildings, fuels, marine environments and cooling systems. - Provides a detailed overview of biocorrosion and the different scientific and/or industrial problems related to microbially induced corrosion - Introduces a variety of investigative techniques and methodologies that are employed in diagnosing and evaluating microbially induced corrosion - Includes case studies on: biodeterioration of building materials; biocorrosion issues associated with diesel and biofuels; marine biocorrosion; corrosion of open recirculating cooling water systems and cooling system components; the effect of H2S on steel corrosion

Failure Modes, Effects and Causes of Microbiologically Influenced Corrosion: Advanced Perspectives and Analysis presents academic research about microbial corrosion (MIC), integrating it into engineering applications that result in a more thorough understanding of MIC and how it is recognized and treated. In addition, new concepts that will be useful in understanding integrity and corrosion management practices are explored. This book will be useful for industry professionals, particularly maintenance and operation engineers, corrosion and material engineers, and R&D personnel working in the field of corrosion protection. - Focuses on the skills and knowledge necessary to understand how (Failure modes) and why (Effects and Causes) materials fail - Explains why corrosion control measures, such as the use of coatings, cathodic protection and inhibitors are useful - Discusses the practical side of MIC treatment in terms of fundamental concepts of time and cost of operation

The effect of corrosion in the oil industry leads to the failure of parts. This failure results in shutting down the plant to clean the facility. The annual cost of corrosion to the oil and gas industry in the United States alone is estimated at $27 billion (According to NACE International)—leading some to estimate the global annual cost to the oil and gas industry as exceeding $60 billion. In addition, corrosion commonly causes serious environmental problems, such as spills and releases. An essential resource for all those who are involved in the corrosion management of oil and gas infrastructure, Corrosion Control in the Oil and Gas Industry provides engineers and designers with the tools and methods to design and implement comprehensive corrosion-management programs for oil and gas infrastructures. The book addresses all segments of the industry, including production, transmission, storage, refining and distribution. - Selects cost-effective methods to control corrosion - Quantitatively measures and estimates corrosion rates - Treats oil and gas infrastructures as systems in order to avoid the impacts that changes to one segment if a corrosion management program may have on others - Provides a gateway to more than 1,000 industry best practices and international standards

Originally published in 1994, this second edition of Corrosion in the Petrochemical Industry collects peer-reviewed articles written by experts in the field of corrosion that were specifically chosen for this book because of their relevance to the petrochemical industry. This edition expands coverage of the different forms of corrosion, including the effects of metallurgical variables on the corrosion of several alloys. It discusses protection methods, including discussion of corrosion inhibitors and corrosion resistance of aluminum, magnesium, stainless steels, and nickels. It also includes a section devoted specifically to petroleum and petrochemical industry related issues.

This book focuses on developments during the first fifty years of existence of the European Federation of Corrosion, and describes the contributions made by its working parties.

Microbiologically-influenced corrosion (MIC) is one of the greatest mysteries of corrosion science and engineering. This book introduces a new approach to the basics of MIC and explains how to recognise, understand, mitigate and/or prevent this type of corrosion. The material covered will benefit professional and consultant engineers in power generating, oil and gas, and marine and mining industries. It will also benefit researchers in a variety of fields.

This book treats corrosion as it occurs and affects processes in real-world situations, and thus points the way to practical solutions. Topics described include the conditions in which petroleum products are corrosive to metals; corrosion mechanisms of petroleum products; which parts of storage tanks containing crude oils and petroleum products undergo corrosion; dependence of corrosion in tanks on type of petroleum products; aggressiveness of petroleum products to polymeric material; how microorganisms take part in corrosion of tanks and pipes containing petroleum products; which corrosion monitoring methods are used in systems for storage and transportation of petroleum products; what corrosion control measures should be chosen; how to choose coatings for inner and outer surfaces of tanks containing petroleum products; and how different additives (oxygenates, aromatic solvents) to petroleum products and biofuels influence metallic and polymeric materials. The book is of interest to corrosion engineers, materials engineers, oil and gas engineers, petroleum engineers, chemists, chemical engineers, mechanical engineers, failure analysts, scientists, and students, designers of tanks, pipelines and other systems for storage and transportation fuels, technicians. The book is of interest to corrosion engineers, materials engineers, oil and gas engineers, petroleum engineers, chemists, chemical engineers, mechanical engineers, failure analysts, scientists, and students, designers of tanks, pipelines and other systems for storage and transportation fuels, technicians. The book is of interest to corrosion engineers, materials engineers, oil and gas engineers, petroleum engineers, chemists, chemical engineers, mechanical engineers, failure analysts, scientists, and students, designers of tanks, pipelines and other systems for storage and transportation fuels, technicians.

The advancement of methods and technologies in the oil and gas industries calls for new insight into the corrosion problems these industries face daily. With the application of more precise instruments and laboratory techniques as well as the development of new scientific paradigms, corrosion professionals are also witnessing a new era in the way d