MEMS Linear and Nonlinear Statics and Dynamics presents the necessary analytical and computational tools for MEMS designers to model and simulate most known MEMS devices, structures, and phenomena. This book also provides an in-depth analysis and treatment of the most common static and dynamic phenomena in MEMS that are encountered by engineers. Coverage also includes nonlinear modeling approaches to modeling various MEMS phenomena of a nonlinear nature, such as those due to electrostatic forces, squeeze-film damping, and large deflection of structures. The book also: Includes examples of numerous MEMS devices and structures that require static or dynamic modeling Provides code for programs in Matlab, Mathematica, and ANSYS for simulating the behavior of MEMS structures Provides real world problems related to the dynamics of MEMS such as dynamics of electrostatically actuated devices, stiction and adhesion of microbeams due to electrostatic and capillary forces MEMS Linear and Nonlinear Statics and Dynamics is an ideal volume for researchers and engineers working in MEMS design and fabrication.

This book, which presents the peer-reviewed post-proceedings of CSNDD 2012 and CSNDD 2014, addresses the important role that relevant concepts and tools from nonlinear and complex dynamics could play in present and future engineering applications. It includes 22 chapters contributed by outstanding researchers and covering various aspects of applications, including: structural health monitoring, diagnosis and damage detection, experimental methodologies, active vibration control and smart structures, passive control of structures using nonlinear energy sinks, vibro-impact dynamic MEMS/NEMS/AFM, energy-harvesting materials and structures, and time-delayed feedback control, as well as aspects of deterministic versus stochastic dynamics and control of nonlinear phenomena in physics. Researchers and engineers interested in the challenges posed and opportunities offered by nonlinearities in the development of passive and active control strategies, energy harvesting, novel design criteria, modeling and characterization will find the book to be an outstanding introduction.

LINEAR and NONLINEAR INSTABILITIES in MECHANICAL SYSTEMS An in-depth insight into nonlinear analysis and control As mechanical systems become lighter, faster, and more flexible, various nonlinear instability phenomena can occur in practical systems. The fundamental knowledge of nonlinear analysis and control is essential to engineers for analysing and controlling nonlinear instability phenomena. This book bridges the gap between the mathematical expressions of nonlinear dynamics and the corresponding practical phenomena. Linear and Nonlinear Instabilities in Mechanical Systems: Analysis, Control and Application provides a detailed and informed insight into the fundamental methods for analysis and control for nonlinear instabilities from the practical point of view. Key features: Refers to the behaviours of practical mechanical systems such as aircraft, railway vehicle, robot manipulator, micro/nano sensor Enhances the rigorous and practical understanding of mathematical methods from an engineering point of view The theoretical results obtained by nonlinear analysis are interpreted by using accompanying videos on the real nonlinear behaviors of nonlinear mechanical systems Linear and Nonlinear Instabilities in Mechanical Systems is an essential textbook for students on engineering courses, and can also be used for self-study or reference by engineers.

Signal Processing is one of the large specializations in electrical engineering, mechanical engineering and computer sciences. It derives input from physics, mathematics and is an indispensable feature of all natural- and life sciences in research and in application. The snew series "Advanced Issues on Signals, Systems and Devices" presents original publications mainly from speakers on the International Conferences on Signal Systems and Devices but also from other international authors. The Conference is a forum for researchers and specialists in different fields covering all types of sensors and measurement systems as for example: Biomedical and Environmental Measurements & Instrumentation; Optical, Chemical and Biomedical Sensors; Mechanical and Thermal Sensors; Micro-Sensors and MEMS-Technology; Nano Sensors, Nano Systems and Nano Technology; Spectroscopy Methods; Signal Processing and Modelling; Multi Sensor Data Fusion; Data Acquisition & Distributed Measurements; Medical and Environmental Applications; Circuit Test, Device Characterization and Modelling; Custom and Semi-Custom Circuits; Analog Circuit Design; Low-Voltage, Low-Power VLSI Design; Hardware Implementation; Materials, Devices and Interconnects; Packaging and Reliability; Battery Monitoring: Impedance Spectroscopy for Measurement and Sensor Solutions; Energy Harvesting and Wireless power Transfer Systems; Wireless Sensor Networks in Industrial Plants This first volume of the new series mainly devotes to the most recent research and implementation of sensors-, circuit systems in signal processing, energy harvesting, nano- and molecular electronics.

This third of three volumes includes papers from the second series of NODYCON, which was held virtually in February of 2021. The conference papers reflect a broad coverage of topics in nonlinear dynamics, ranging from traditional topics from established streams of research to those from relatively unexplored and emerging venues of research. These include · Complex dynamics of COVID-19: modeling, prediction and control · Nonlinear phenomena in bio-systems and eco-systems · Energy harvesting · MEMS/NEMS · Multifunctional structures, materials and metamaterials · Nonlinear waves · Chaotic systems, stochasticity, and uncertainty

This is the first book which exploits concepts and tools of global nonlinear dynamics for bridging the gap between theoretical and practical stability of systems/structures, and for possibly enhancing the engineering design in macro-, micro- and nano-mechanics. Addressed topics include complementing theoretical and practical stability to achieve load carrying capacity; dynamical integrity for analyzing global dynamics, for interpreting/predicting experimental behavior, for getting hints towards engineering design; techniques for control of chaos; response of uncontrolled and controlled system/models in applied mechanics and structural dynamics by also considerung the effect of system imperfections; from relatively simple systems to multidimensional models representative of real world applications; potential and expected impact of global dynamics for engineering design.

This book consists of review articles by experts on recent developments in mechanical engineering sciences. The book has been composed to commemorate the Silver Jubilee of the Mechanical Engineering Department, Indian Institute of Technology Guwahati. It includes articles on modern mechanical sciences subjects of advanced simulation techniques and molecular dynamics, microfluidics and microfluidic devices, energy systems, intelligent fabrication, microscale manufacturing, smart materials, computational techniques, robotics and their allied fields. It presents the upcoming and emerging areas in mechanical sciences which will help in formulation of new courses and updating existing curricula. This book will help the academicians and policy makers in the field of engineering education to chart out the desired path for the development of technical education.

Nonlinear Differential Equations in Micro/nano Mechanics: Application in Micro/Nano Structures in Electromechanical Systems presents a variety of various efficient methods, including Homotropy methods, Adomian methods, reduced order methods and numerical methods for solving the nonlinear governing equation of micro/nanostructures. Various structures, including beam type micro/nano-electromechanical systems (MEMS/NEMS), carbon nanotube and graphene actuators, nano-tweezers, nano-bridges, plate-type microsystems and rotational micromirrors are modeled. Nonlinearity due to physical phenomena such as dispersion forces, damping, surface energies, microstructure-dependency, non-classic boundary conditions and geometry, and more is included.

Nonlinear Dynamics, Volume 1. Proceedings of the 34th IMAC, A Conference and Exposition on Dynamics of Multiphysical Systems: From Active Materials to Vibroacoustics, 2016, the fi rst volume of ten from the Conference, brings together contributions to this important area of research and engineering. Th e collection presents early fi ndings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on: • Nonlinear Oscillations • Nonlinear Modal Analysis • Nonlinear System Identifi cation • Nonlinear Modeling & Simulation • Nonlinearity in Practice • Nonlinearity in Multi-Physics Systems • Nonlinear Modes and Modal Interactions