Today’s wireless communications and information systems are heavily based on microwave technology. Current trends indicate that in the future along with - crowaves, the millimeter wave and Terahertz technologies will be used to meet the growing bandwidth and overall performance requirements. Moreover, motivated by the needs of the society, new industry sectors are gaining ground; such as wi- less sensor networks, safety and security systems, automotive, medical, envir- mental/food monitoring, radio tags etc. Furthermore, the progress and the pr- lems in the modern society indicate that in the future these systems have to be more user/consumer friendly, i. e. adaptable, reconfigurable and cost effective. The mobile phone is a typical example which today is much more than just a phone; it includes a range of new functionalities such as Internet, GPS, TV, etc. To handle, in a cost effective way, all available and new future standards, the growing n- ber of the channels and bandwidth both the mobile handsets and the associated systems have to be agile (adaptable/reconfigurable). The complex societal needs have initiated considerable activities in the field of cognitive and software defined radios and triggered extensive research in adequate components and technology platforms. To meet the stringent requirements of these systems, especially in ag- ity and cost, new components with enhanced performances and new functionalities are needed. In this sense the components based on ferroelectrics have greater - tential and already are gaining ground.

"This book is an introduction to Multi-functional, Adaptive Radio Radar and Sensor systems. The book presents the findings of the five year project entitled "MARRS: Multifunctional Adaptive Radio and Sensors" that ran from 2001 to 2008. It presents a systematic approach to the system level design required to develop MARRS technology."--BOOK JACKET.

Offers an up-to-date description of modern multifunctional antenna systems and microwave components Compact multifunctional antennas are of great interest in the field of antennas and wireless communication systems, but there are few, if any, books available that fully explore the multifunctional concept. Divided into six chapters, Compact Multifunctional Antennas for Wireless Systems encompasses both the active and passive multifunctional antennas and components for microwave systems. It provides a systematic, valuable reference for antenna/microwave researchers and designers. Beginning with such novel passive components as antenna filters, antenna packaging covers, and balun filters, the book discusses various miniaturization techniques for the multifunctional antenna systems. In addition to amplifying and oscillating antennas, the book also covers design considerations for frequency- and pattern-reconfigurable antennas. The last chapter is dedicated to the field of solar cell integrated antennas. Inside, readers will find comprehensive chapters on: Compact Multifunctional Antennas in Microwave Wireless Systems Multifunctional Passive Integrated Antennas and Components Reconfigurable Antennas Receiving Amplifying Antennas Oscillating Antennas Solar cell integrated Antennas Aimed at professional engineers and researchers designing compact antennas for wireless applications, Compact Multifunctional Antennas for Wireless Systems will prove to be an invaluable tool.

Building on the success of the previous three editions, Foundations for Microstrip Circuit Design offers extensive new, updated and revised material based upon the latest research. Strongly design-oriented, this fourth edition provides the reader with a fundamental understanding of this fast expanding field making it a definitive source for professional engineers and researchers and an indispensable reference for senior students in electronic engineering. Topics new to this edition: microwave substrates, multilayer transmission line structures, modern EM tools and techniques, microstrip and planar transmision line design, transmission line theory, substrates for planar transmission lines, Vias, wirebonds, 3D integrated interposer structures, computer-aided design, microstrip and power-dependent effects, circuit models, microwave network analysis, microstrip passive elements, and slotline design fundamentals.

This book joins and integrates ceramics and ceramic-based materials in various sectors of technology. A major imperative is to extract scientific information on joining and integration response of real, as well as model, material systems currently in a developmental stage. This book envisions integration in its broadest sense as a fundamental enabling technology at multiple length scales that span the macro, millimeter, micrometer and nanometer ranges. Consequently, the book addresses integration issues in such diverse areas as space power and propulsion, thermoelectric power generation, solar energy, micro-electro-mechanical systems (MEMS), solid oxide fuel cells (SOFC), multi-chip modules, prosthetic devices, and implanted biosensors and stimulators. The engineering challenge of designing and manufacturing complex structural, functional, and smart components and devices for the above applications from smaller, geometrically simpler units requires innovative development of new integration technology and skillful adaptation of existing technology.

Microwave and Millimeter Wave Circuits and Systems: Emerging Design, Technologies and Applications provides a wide spectrum of current trends in the design of microwave and millimeter circuits and systems. In addition, the book identifies the state-of-the art challenges in microwave and millimeter wave circuits systems design such as behavioral modeling of circuit components, software radio and digitally enhanced front-ends, new and promising technologies such as substrate-integrated-waveguide (SIW) and wearable electronic systems, and emerging applications such as tracking of moving targets using ultra-wideband radar, and new generation satellite navigation systems. Each chapter treats a selected problem and challenge within the field of Microwave and Millimeter wave circuits, and contains case studies and examples where appropriate. Key Features: Discusses modeling and design strategies for new appealing applications in the domain of microwave and millimeter wave circuits and systems Written by experts active in the Microwave and Millimeter Wave frequency range (industry and academia) Addresses modeling/design/applications both from the circuit as from the system perspective Covers the latest innovations in the respective fields Each chapter treats a selected problem and challenge within the field of Microwave and Millimeter wave circuits, and contains case studies and examples where appropriate This book serves as an excellent reference for engineers, researchers, research project managers and engineers working in R&D, professors, and post-graduates studying related courses. It will also be of interest to professionals working in product development and PhD students.

Bendable wearable materials like conductive strands, fluid metallic mixes, and polymer in paper are generally utilized as a part of the current adaptable electronic gadgets. Extra necessities are implemented in wearable applications. Characteristic elastic, for example, is an appealing exchange adaptable material that is biocompatible and offers high conductivity, low lost, simplicity to make, and most importantly, it is water/climate safe and condition amicable. The wearable antenna is one of the key components to establish body area network (BAN) for wireless communication, which is why it has become such an important part of antenna research. Wearable antennas are being applied successfully in various parts of life such as health monitoring, physical training, navigation, RFID, medicine, military, and more. Emerging Materials and Advanced Designs for Wearable Antennas explores how wearable antenna technology is being employed to enhance the quality of life in various industries. The technologies implemented and success of these antenna technologies is essential in the emerging field of wearable computing and is discussed in detail within the contents of this book. While covering essential topics such as the optimization of antenna material, improvement in flexible antenna performance, synthesis and design aspects of antennas, and transmission and receiving of the bendable antenna, this book is ideal for the military field, scientists, the medical field, practitioners, stakeholders, researchers, academicians, and students looking for the most advanced and updated research on the technology and implementation of wearable antennas spanning multiple industries.

Laser ablation refers to the phenomenon in which an intense laser beam irradiates the surface of a solid to induce instant local removal of atoms by a thermal or non-thermal mechanism. Through eight chapters of original research studies and literature reviews written by experts from the international scientific community, this book presents theoretical and experimental aspects of the laser ablation phenomenon for processing material including pulsed laser deposition of thin films, laser surface modification, laser machining and laser nanoparticle formation. It also includes a study of the dynamics of plasmas generated by laser ablation of multi-component materials and an overview of laser-induced breakdown spectroscopy (LIBS) and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) techniques for chemical analysis.

Ferroelectricity is a well-known phenomenon commonly used in scientific and industrial communities. Ferroelectric materials are the building blocks of different devices and technological innovations. This book presents an overview of the basic phenomenon of ferroelectricity and different ferroelectrics and ferroelectric devices, including their theoretical study, synthesis, characterization, and application. Chapters cover such topics as the basics of ferroelectricity, perovskite ferroelectrics and relaxor ferroelectrics, piezoelectricity, and more.