Stone buildings and monuments form the cultural centres of many of the world's urban areas. Frequently these areas are prone to high levels of atmospheric pollution that promote a variety of aggressive stone decay processes. Because of this, stone decay is now widely recognised as a severe threat to much of our cultural heritage. An interdisciplinary approach between geologists, environmental scientists, chemists, material scientists, civil engineers, restorers and architects aims to strengthen the knowledge base dealing with the causes, consequences, prevention and solution of stone decay problems.

Natural stone is considered to be a versatile, durable and aesthetically pleasing building material. From the beginning of civilization, important structures and monuments have been built from, or based on, natural stone. Until the end of the nineteenth century, the use of local stone re-sources was mostly in balance with the local environment. Strict environ-mental legislation has resulted in the closing of many long-standing quar-ries in industrialized countries, which has led to a shortage of traditional stone varieties. This has caused problems for restoration practice. Cheap, imported stone from less industrialized countries has become more widely available in recent years. Some of the issues related to built stone conservation and restoration cov-ered by this volume are: the establishment of inventories of possible re-placement stones; understanding the decay mechanism and use of preven-tive conservation methods for slowing down decay processes; evaluation of the properties of natural stone; and assessing the risks of using replacement stones of different qualities.

A state-of-the-art assessment of how geomorphology contributes to the comprehension, mapping and modelling of hazardous Earth surface processes.

The conservation of cultural heritage is a major commitment for all countries around the world, since it is a complex task and a matter of great responsibility. Amongst other sectors of society, science has a contribution to make to heritage preservation. This book is the result of the international conference “Heritage, Weathering and Conservation” (HWC2006), held in Madrid, Spain in 2006. It brought together prominent scientists and professionals from a variety of disciplines who have been active in the field and have raised the profile of heritage preservation. The main aspects addressed at this conference were those related to the causes of decay of cultural materials (stone, ceramics, metals, paintings, mortars, timber, adobes, etc); the characterization of their properties and the assessment of analytical techniques for their study, with a focus on non-destructive techniques. Many of the studies stress the importance of salt crystallization, atmospheric pollution and biodeterioration and relate these specific factors to decay. A variety of case studies are included, as well as an examination of policies and management. This book will be useful to professionals and scientists working in a variety of fields related to heritage: geologists, geographers, chemists, physicists, biologists, architects, engineers, restorers, historians, archaeologists, policy makers and the general public.

The weathering of historical buildings and, indeed, of monuments and sculptures of natural stone is a problem that has been encountered for hundreds of years. However a dramatic increase in deterioration in the structure of our built heritage has been observed during the past century. To understand the complex interaction that the stone in a building suffers with its near environment (the building) and the macro environment (the local climate and atmospheric conditions) requires an interdisciplinary approach and the application of many disciplines. Climate change over the next 100 years is likely to have a range of direct and indirect impacts on many natural and physical environments, including the built environment. The protection of our architectural heritage has both cultural and historical importance, as well as substantial economic and ecological value. Large sums of money are being spent world-wide on measures for the preservation of monuments and historical buildings. The past few decades has seen an unprecedented level of research activity in this area, the result of which is often difficult to access and are summarized in the new edition of STONE IN ARCHITECTURE. The 4th edition of Stone in Architecture: Properties, Durability, is a sophisticated and thorough exploration of stone – its properties, performance and conservation – in monumental contexts. The current editors, Siegfried Siegesmund and Rolf Snethlage, note the pioneering work of Erhard Winkler who wrote the first edition in 1973 when so little information could be found in the literature on the subject. This new edition, also published by Springer, nearly doubles the size of Winkler’s 1994 effort. If you are familiar with the field and need to know little more than this statement, you can put aside this review and go buy the book. George Wheeler, Department of Scientific Research, The Metropolitan Museum of Art, New York.

First published in 1996, this volume has been substantially updated to reflect new research in the conservation of stone monuments, sculpture, and archaeological sites.

Handbook of Materials Failure Analysis: With Case Studies from the Construction Industry provides a thorough understanding of the reasons materials fail in certain situations, covering important scenarios including material defects, mechanical failure due to various causes, and improper material selection and/or corrosive environment. The book begins with a general overview of materials failure analysis and its importance, and then logically proceeds from a discussion of the failure analysis process, types of failure analysis, and specific tools and techniques, to chapters on analysis of materials failure from various causes. Failure can occur for several reasons, including: materials defects-related failure, materials design-related failure, or corrosion-related failures. The suitability of the materials to work in a definite environment is an important issue. The results of these failures can be catastrophic in the worst case scenarios, causing loss of life. This important reference covers the most common types of materials failure, and provides possible solutions. - Provides the most up-to-date and balanced coverage of failure analysis, combining foundational knowledge and current research on the latest developments and innovations in the field - Offers an ideal accompaniment for those interested in materials forensic investigation, failure of materials, static failure analysis, dynamic failure analysis, and fatigue life prediction - Presents compelling new case studies from key industries to demonstrate concepts and to assist users in avoiding costly errors that could result in catastrophic events

This book provides a comprehensive, up-to-date overview on the most pressing issues in the conservation and management of archaeological, architectural, and urban landscapes. Multidisciplinary research is presented on a wide range of built heritage sites, from archaeological ruins and historic centers through to twentieth century and industrial architectural heritage. The role of ICT and new technologies, including those used for digital archiving, surveying, modeling, and monitoring, is extensively discussed, in recognition of their importance for professionals working in the field. Detailed attention is also paid to materials and treatments employed in preventive conservation and management. With contributions from leading experts, including university researchers, professionals, and policy makers, the book will be invaluable for all who seek to understand, and solve, the challenges face d in the protection and enhancement of the built heritage.