Water pollution occurs when toxic pollutants of varying kinds (organic, inorganic, radioactive and so on) are directly or indirectly discharged into water bodies without adequate treatment to remove such potential pollutants. Today's sources of these potential pollutants, which cause high deterioration of freshwater quality, are city sewage and industrial waste discharge, human agricultural practices, industrial waste disposal practices, mining activities, civil and structural work activities and obviously natural contamination with climate change. When our water is polluted, it is not only devastating to the environment but also to human health. Therefore, development of water and wastewater treatment processes to alleviate water pollution has been a challenging and demanding task for engineers, scientists and researchers. Perhaps this is even more challenging for underdeveloped and developing countries, where water and wastewater treatment facilities, knowledge and infrastructure are limited. Water and wastewater treatment processes are broad and often multidisciplinary in nature, comprising a mixture of research areas including physical, chemical and biological methods to remove or transform various potential pollutants. This is in hopes to achieve acceptable water quality and satisfy governmental and environmental protection agencies' laws and regulations. With these objectives, this book has been written in order to provide various research results and compilation and up-to-date development on the current states of knowledge and techniques in the broad field of water and wastewater treatment processes. Basically, this book will give a comprehensive understanding and advancement and application of various physical, chemical and biological treatment methods in the reduction of potential pollutants (inorganics/organics) from water and wastewater. There are a total 18 book chapters contributed by large number of expert authors around the world, covering the following main research areas: Physical, chemical and biological water treatment processes such as adsorption, biosorption, coagulation/flocculation, electrocoagulation, denitration, membrane filtration/separation, photo-catalytic reduction, advanced oxidation, nutrients removal by struvite crystallisation and nanotechnology; Physical, chemical and biological methods for municipal wastewater and industrial wastewater treatment plants such as primary-secondary sludge treatments, anaerobic digestions, aerobic treatment, activated sludge processes, dewaterability by flocculants, pre-treatments of sludge and rheology of sludge in wastewater treatment; Various operational units/equipment and process control of wastewater treatment plant.

Principles of Water and Wastewater Treatment Processes is the third book in the Water and Wastewater Process Technologies Series. The book outlines the principle unit operations that are involved in the separation, degradation and utilisation of organic and inorganic matter during water and wastewater treatment. The module builds on the subjects of chemistry, biology and engineering covered in Process Science and Engineering for Water and Wastewater Treatment (Module 1) and provides a descriptive introduction to unit operations that are further described with design and operational details in later books in the series. The text of Principles of Water and Wastewater Treatment Processes has been divided into the following Units: Water Quality Process Flowsheeting Physical Processes Chemical Processes Sorption Processes Biological Processes Membrane Processes Sludge Treatment Utilisation Odour Management These units have has been designed for individual self-paced study that includes photographs, illustrations and tables and describe the form, function and application of unit operations for the treatment of water and wastewater. Each section of the text gives step-by-step learning in a particular subject, that includes an approximation of how long you will need to spend on that section and provides key points that highlight the principles of the different sections. Each unit includes exercises to help understand the material in the text, self-assessment questions to test your understanding and text references.

Carefully designed to balance coverage of theoretical and practical principles, Fundamentals of Water Treatment Unit Processes delineates the principles that support practice, using the unit processes approach as the organizing concept. The author covers principles common to any kind of water treatment, for example, drinking water, municipal wastew

Introduction to Wastewater Treatment Processes considers various types of wastewater problems and the selection of proper mode of treatment, as well as the design of the equipment required. This book is divided into eight chapters and begins with a summary of the theory involved in the specific process, such as chemical kinetics and material and energy balances. The next chapter deals with the physical and chemical principles of wastewater treatment processes. These topics are followed by discussions of the important design parameters involved in the process and the determination of such parameters using laboratory-scale or pilot-plant equipment. Other chapters explore the development of a systematic design procedure for the treatment plant. The final chapters look into the mathematical modeling of biological treatment processes. This book will prove useful to practicing engineers and students.

Explains the fundamental theory and mathematics of water and wastewater treatment processes By carefully explaining both the underlying theory and the underlying mathematics, this text enables readers to fully grasp the fundamentals of physical and chemical treatment processes for water and wastewater. Throughout the book, the authors use detailed examples to illustrate real-world challenges and their solutions, including step-by-step mathematical calculations. Each chapter ends with a set of problems that enable readers to put their knowledge into practice by developing and analyzing complex processes for the removal of soluble and particulate materials in order to ensure the safety of our water supplies. Designed to give readers a deep understanding of how water treatment processes actually work, Water Quality Engineering explores: Application of mass balances in continuous flow systems, enabling readers to understand and predict changes in water quality Processes for removing soluble contaminants from water, including treatment of municipal and industrial wastes Processes for removing particulate materials from water Membrane processes to remove both soluble and particulate materials Following the discussion of mass balances in continuous flow systems in the first part of the book, the authors explain and analyze water treatment processes in subsequent chapters by setting forth the relevant mass balance for the process, reactor geometry, and flow pattern under consideration. With its many examples and problem sets, Water Quality Engineering is recommended as a textbook for graduate courses in physical and chemical treatment processes for water and wastewater. By drawing together the most recent research findings and industry practices, this text is also recommended for professional environmental engineers in search of a contemporary perspective on water and wastewater treatment processes.

Applications of New Concepts of Physical-Chemical Wastewater Treatment deals with novel concepts of physical-chemical wastewater treatment, with particular reference to their engineering applications. Topics covered range from ultrahigh rate filtration of municipal wastewater to the applicability of carbon adsorption in the treatment of petrochemical wastewaters, along with regeneration of activated carbon and dewatering of physical-chemical sludges. Comprised of 31 chapters, this volume begins with a discussion on the use of physical-chemical methods for the treatment of municipal wastes and for direct wastewater treatment. The following chapters focus on the interrelationships between biological treatment and physicochemical treatment; some problems associated with the treatment of sewage by non-biological processes; treatment of wastes generated by metal finishing and engineering industries; and the principles and practice of granular carbon reactivation. The precipitation of calcium phosphate in wastewaters is also considered, together with the use of surface stirrers for ammonia desorption from ponds. This book will be a valuable resource for chemists, engineers, government officials, and environmental policymakers.

The past 30 years have seen the emergence of a growing desire worldwide to take positive actions to restore and protect the environment from the degrading effects of all forms of pollution: air, noise, solid waste, and water. Because pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for “zero discharge” can be construed as an unrealistic demand for zero waste. However, as long as waste exists, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been identified: (1) How serious is the pollution? (2) Is the technology to abate it available? and (3) Do the costs of abatement justify the degree of abatement achieved? The principal intention of the Handbook of Environmental Engineering series is to help readers formulate answers to the last two questions. The traditional approach of applying tried-and-true solutions to specific pollution pr- lems has been a major contributing factor to the success of environmental engineering, and has accounted in large measure for the establishment of a “methodology of pollution c- trol. ” However, realization of the ever-increasing complexity and interrelated nature of current environmental problems makes it imperative that intelligent planning of pollution abatement systems be undertaken.

Provides an excellent balance between theory and applications in the ever-evolving field of water and wastewater treatment Completely updated and expanded, this is the most current and comprehensive textbook available for the areas of water and wastewater treatment, covering the broad spectrum of technologies used in practice today—ranging from commonly used standards to the latest state of the art innovations. The book begins with the fundamentals—applied water chemistry and applied microbiology—and then goes on to cover physical, chemical, and biological unit processes. Both theory and design concepts are developed systematically, combined in a unified way, and are fully supported by comprehensive, illustrative examples. Theory and Practice of Water and Wastewater Treatment, 2nd Edition: Addresses physical/chemical treatment, as well as biological treatment, of water and wastewater Includes a discussion of new technologies, such as membrane processes for water and wastewater treatment, fixed-film biotreatment, and advanced oxidation Provides detailed coverage of the fundamentals: basic applied water chemistry and applied microbiology Fully updates chapters on analysis and constituents in water; microbiology; and disinfection Develops theory and design concepts methodically and combines them in a cohesive manner Includes a new chapter on life cycle analysis (LCA) Theory and Practice of Water and Wastewater Treatment, 2nd Edition is an important text for undergraduate and graduate level courses in water and/or wastewater treatment in Civil, Environmental, and Chemical Engineering.

The books currently available on this subject contain some elements of physical-chemical treatment of water and wastewater but fall short of giving comprehensive and authoritative coverage. They contain some equations that are not substantiated, offering empirical data based on assumptions that are therefore difficult to comprehend. This text brings together the information previously scattered in several books and adds the knowledge from the author's lectures on wastewater engineering. Physical-Chemical Treatment of Water and Wastewater is not only descriptive but is also analytical in nature. The work covers the physical unit operations and unit processes utilized in the treatment of water and wastewater. Its organization is designed to match the major processes and its approach is mathematical. The authors stress the description and derivation of processes and process parameters in mathematical terms, which can then be generalized into diverse empirical situations. Each chapter includes design equations, definitions of symbols, a glossary of terms, and worked examples. One author is an environmental engineer and a professor for over 12 years and the other has been in the practice of environmental engineering for more than 20 years. They offer a sound analytical mathematical foundation and description of processes. Physical-Chemical Treatment of Water and Wastewater fills a niche as the only dedicated textbook in the area of physical and chemical methods, providing an analytical approach applicable to a range of empirical situations Contents Introduction Characteristics of Water and Wastewater Quantity of Water and Wastewater Constituents of Water and Wastewater Unit Operations of Water and Wastewater Treatment Flow Measurements and Flow and Quality Equalizations Pumping Screening, Settling, and Flotation Mixing and Flocculation Conventional Filtration Advanced Filtration and Carbon Adsorption Aeration, Absorption, and Stripping Unit Processes of Water and Wastewater Treatment Water Softening Water Stabilization Coagulation Removal of Iron and Manganese by Chemical Precipitation Removal of Phosphorus by Chemical Precipitation Removal of Nitrogen by Nitrification-Denitrification Ion Exchange Disinfection

Advanced Materials and Technologies for Wastewater Treatment discusses the methods and technologies of physical, chemical, biological, and thermo-catalytic treatment techniques. It includes the treatment of waste generated by municipal, agro-industry, and other industries including chemical, biomedical, pharmaceutical, textile, and other sectors. FEATURES Covers implementation of advanced water and wastewater treatment techniques, with a focus on pollutant or pathogen removal Includes qualitative and quantitative analyses Focuses on physical, chemical, and biological treatment technologies Discusses the advancements of materials and technologies applicable to both potable water and wastewater from industrial and municipal sources Explores future challenges and viable solutions This book is aimed at chemical and environmental engineers and researchers seeking a thorough treatment of innovative water treatment materials and techniques for practical applications.