Engineering systems operate through actuators, most of which will exhibit phenomena such as saturation or zones of no operation, commonly known as dead zones. These are examples of piecewise-affine characteristics, and they can have a considerable impact on the stability and performance of engineering systems. This book targets controller design for piecewise affine systems, fulfilling both stability and performance requirements. The authors present a unified computational methodology for the analysis and synthesis of piecewise affine controllers, taking an approach that is capable of handling sliding modes, sampled-data, and networked systems. They introduce algorithms that will be applicable to nonlinear systems approximated by piecewise affine systems, and they feature several examples from areas such as switching electronic circuits, autonomous vehicles, neural networks, and aerospace applications. Piecewise Affine Control: Continuous-Time, Sampled-Data, and Networked Systems is intended for graduate students, advanced senior undergraduate students, and researchers in academia and industry. It is also appropriate for engineers working on applications where switched linear and affine models are important.

How do you fly an airplane from one point to another as fast as possible? What is the best way to administer a vaccine to fight the harmful effects of disease? What is the most efficient way to produce a chemical substance? This book presents practical methods for solving real optimal control problems such as these. Practical Methods for Optimal Control Using Nonlinear Programming, Third Edition focuses on the direct transcription method for optimal control. It features a summary of relevant material in constrained optimization, including nonlinear programming; discretization techniques appropriate for ordinary differential equations and differential-algebraic equations; and several examples and descriptions of computational algorithm formulations that implement this discretize-then-optimize strategy. The third edition has been thoroughly updated and includes new material on implicit Runge–Kutta discretization techniques, new chapters on partial differential equations and delay equations, and more than 70 test problems and open source FORTRAN code for all of the problems. This book will be valuable for academic and industrial research and development in optimal control theory and applications. It is appropriate as a primary or supplementary text for advanced undergraduate and graduate students.

This self-contained book presents in a unified, systematic way the basic principles of optimal control governed by ODEs. Using a variational perspective, the author incorporates important restrictions like constraints for control and state, as well as the state system itself, into the equivalent variational reformulation of the problem. The fundamental issues of existence of optimal solutions, optimality conditions, and numerical approximation are then examined from this variational viewpoint. Inside, readers will find a unified approach to all the basic issues of optimal control, academic and real-world examples testing the book’s variational approach, and a rigorous treatment stressing ideas and arguments rather than the underlying mathematical formalism. A Variational Approach to Optimal Control of ODEs is mainly for applied analysts, applied mathematicians, and control engineers, but will also be helpful to other scientists and engineers who want to understand the basic principles of optimal control governed by ODEs. It requires no prerequisites in variational problems or expertise in numerical approximation. It can be used for a first course in optimal control.

This book introduces optimal control methods, formulated as optimization problems, applied to business dynamics problems. Business dynamics refers to a combination of business management and financial objectives embedded in a dynamical system model. The model is subject to a control that optimizes a performance index and takes both management and financial aspects into account. Business Dynamics Models: Optimization-Based One Step Ahead Optimal Control includes solutions that provide a rationale for the use of optimal control and guidelines for further investigation into more complex models, as well as formulations that can also be used in a so-called flight simulator mode to investigate different complex scenarios. The text offers a modern programming environment (Jupyter notebooks in JuMP/Julia) for modeling, simulation, and optimization, and Julia code and notebooks are provided on a website for readers to experiment with their own examples. This book is intended for students majoring in applied mathematics, business, and engineering. The authors use a formulation-algorithm-example approach, rather than the classical definition-theorem-proof, making the material understandable to senior undergraduates and beginning graduates.

Extremum Seeking through Delays and PDEs, the first book on the topic, expands the scope of applicability of the extremum seeking method, from static and finite-dimensional systems to infinite-dimensional systems. Readers will find numerous algorithms for model-free real-time optimization are developed and their convergence guaranteed, extensions from single-player optimization to noncooperative games, under delays and PDEs, are provided, the delays and PDEs are compensated in the control designs using the PDE backstepping approach, and stability is ensured using infinite-dimensional versions of averaging theory, and accessible and powerful tools for analysis. This book is intended for control engineers in all disciplines (electrical, mechanical, aerospace, chemical), mathematicians, physicists, biologists, and economists. It is appropriate for graduate students, researchers, and industrial users.

This book introduces transfinite interpolation as a generalization of interpolation of data prescribed at a finite number of points to data prescribed on a geometrically structured set, such as a piece of curve, surface, or submanifold. The time-independent theory is readily extended to a moving/deforming data set whose dynamics is specified in a Eulerian or Lagrangian framework. The resulting innovative tools cover a very broad spectrum of applications in fluid mechanics, geometric optimization, and imaging. The authors chose to focus on the dynamical mesh updating in fluid mechanics and the construction of velocity fields from the boundary expression of the shape derivative. Transfinite Interpolations and Eulerian/Lagrangian Dynamics is a self-contained graduate-level text that integrates theory, applications, numerical approximations, and computational techniques. It applies transfinite interpolation methods to finite element mesh adaptation and ALE fluid-structure interaction. Specialists in applied mathematics, physics, mechanics, computational sciences, imaging sciences, and engineering will find this book of interest.

This book is about nonlinear observability. It provides a modern theory of observability based on a new paradigm borrowed from theoretical physics and the mathematical foundation of that paradigm. In the case of observability, this framework takes into account the group of invariance that is inherent to the concept of observability, allowing the reader to reach an intuitive derivation of significant results in the literature of control theory. The book provides a complete theory of observability and, consequently, the analytical solution of some open problems in control theory. Notably, it presents the first general analytic solution of the nonlinear unknown input observability (nonlinear UIO), a very complex open problem studied in the 1960s. Based on this solution, the book provides examples with important applications for neuroscience, including a deep study of the integration of multiple sensory cues from the visual and vestibular systems for self-motion perception. Observability: A New Theory Based on the Group of Invariance is the only book focused solely on observability. It provides readers with many applications, mostly in robotics and autonomous navigation, as well as complex examples in the framework of vision-aided inertial navigation for aerial vehicles. For these applications, it also includes all the derivations needed to separate the observable part of the system from the unobservable, an analysis with practical importance for obtaining the basic equations for implementing any estimation scheme or for achieving a closed-form solution to the problem. This book is intended for researchers in robotics and automation, both in academia and in industry. Researchers in other engineering disciplines, such as information theory and mechanics, will also find the book useful.

Control of Autonomous Aerial Vehicles is an edited book that provides a single-volume snapshot on the state of the art in the field of control theory applied to the design of autonomous unmanned aerial vehicles (UAVs), aka “drones”, employed in a variety of applications. The homogeneous structure allows the reader to transition seamlessly through results in guidance, navigation, and control of UAVs, according to the canonical classification of the main components of a UAV’s autopilot. Each chapter has been written to assist graduate students and practitioners in the fields of aerospace engineering and control theory. The contributing authors duly present detailed literature reviews, conveying their arguments in a systematic way with the help of diagrams, plots, and algorithms. They showcase the applicability of their results by means of flight tests and numerical simulations, the results of which are discussed in detail. Control of Autonomous Aerial Vehicles will interest readers who are researchers, practitioners or graduate students in control theory, autonomous systems or robotics, or in aerospace, mechanical or electrical engineering.

This research monograph summarizes solutions to reconfigurable fault-tolerant control problems for nonlinear dynamical systems that are based on the fault-hiding principle. It emphasizes but is not limited to complete actuator and sensor failures. In the first part, the monograph starts with a broad introduction of the control reconfiguration problems and objectives as well as summaries and explanations of solutions for linear dynamical systems. The solution is always a reconfiguration block, which consists of linear virtual actuators in the case of actuator faults and linear virtual sensors in the case of sensor faults. The main advantage of the fault-hiding concept is the reusability of the nominal controller, which remains in the loop as an active system while the virtual actuator and sensor adapt the control input and the measured output to the fault scenario. The second and third parts extend virtual actuators and virtual sensors towards the classes of Hammerstein-Wiener systems and piecewise affine systems. The main analyses concern stability recovery, setpoint tracking recovery, and performance recovery as reconfiguration objectives. The fourth part concludes the monograph with descriptions of practical implementations and case studies. The book is primarily intended for active researchers and practicing engineers in the field of fault-tolerant control. Due to many running examples it is also suitable for interested graduate students.

This book delves into the complexities of fault estimation and fault-tolerant control for nonlinear time-delayed systems. Through the use of multiple-integral observers, it addresses fault estimation and active fault-tolerant control for time-delayed fuzzy systems with actuator faults and both actuator and sensor faults. Additionally, the book explores the use of sliding mode control to solve issues of sensor fault estimation, intermittent actuator fault estimation, and active fault-tolerant control for time-delayed switched fuzzy systems. Furthermore, it presents the use of H∞ guaranteed cost control for both time-delayed switched fuzzy systems and time-delayed switched fuzzy stochastic systems with intermittent actuator and sensor faults. Finally, the problem of delay-dependent finite-time fault-tolerant control for uncertain switched T-S fuzzy systems with multiple time-varying delays, intermittent process faults and intermittent sensor faults is studied. The research on fault estimation and tolerant control has drawn attention from engineers and scientists in various fields such as electrical, mechanical, aerospace, chemical, and nuclear engineering. The book provides a comprehensive framework for this topic, placing a strong emphasis on the importance of stability analysis and the impact of result conservatism on the design and implementation of observers and controllers. It is intended for undergraduate and graduate students interested in fault diagnosis and tolerant control technology, researchers studying time-varying delayed T-S fuzzy systems, and observer/controller design engineers working on system stability applications.