Probabilistic safety assessment methods are used to calculate nuclear power plant durability and resource lifetime. Successful calculation of the reliability and ageing of components is critical for forecasting safety and directing preventative maintenance, and Probabilistic safety assessment for optimum nuclear power plant life management provides a comprehensive review of the theory and application of these methods.Part one reviews probabilistic methods for predicting the reliability of equipment. Following an introduction to key terminology, concepts and definitions, formal-statistical and various physico–statistical approaches are discussed. Approaches based on the use of defect-free models are considered, along with those using binomial distribution and models based on the residual defectiveness of structural materials. The practical applications of probabilistic methods for strength reliability are subsequently explored in part two. Probabilistic methods for increasing the reliability and safety of nuclear power plant components are investigated, as are the use of such methods for optimising non-destructive tests, hydraulic tests, technical certification and planned-preventative maintenance. Finally, the book concludes with information on the use of probabilistic methods in ensuring leak tightness of nuclear power plant steam generator heat exchanger pipes.With its distinguished authors, Probabilistic safety assessment for optimum nuclear power plant life management is a valuable reference for all nuclear plant designers, operators, nuclear safety engineers and managers, as well as academics and researchers in this field. - Discusses the theory and application of probabilistic safety assessment methods used to calculate nuclear power plant (NPP) durability and lifetime - Reviews probabilistic methods in their application to NPP components and ageing pipelines for the forecasting of NPP resource lifetime and safety - Addresses the key areas of probabilistic safety analysis, optimization of the operations through in-service inspection (ISI) utilising non-destructive testing, and maintenance, service and repair approaches

This publication, which draws upon the outcome of an IAEA coordinated research project, presents methodologies for assessing pipe failure rates in advanced water cooled reactors (WCRs), including a comprehensive review of good practices for the assessment of piping reliability parameters for advanced WCRs. Good practices are those processes and analytical tasks that would be expected in piping reliability analysis in order for the results to be realistic representations of piping structural integrity. This publication builds on technical insights that have been obtained using different methodologies when applied in multiple analytical contexts and responding to the requirements of different national codes and standards. It provides Member States with a strong technical basis for establishing design and plant centric piping reliability parameters for input into probabilistic safety assessment studies, in-service inspection programme development, and operational support. Additionally, an objective evaluation and inter-comparison of methods used in participating Member States is outlined leading to a harmonization of the practices relevant to newly deployable advanced WCRs.

Due to their continuing role in electricity generation, it is important that coal power plants operate as efficiently and cleanly as possible. Coal Power Plant Materials and Life Assessment reviews the materials used in coal plants, and how they can be assessed and managed to optimize plant operation. Part I considers the structural alloys used in coal plants. Part II then reviews performance modelling and life assessment techniques, explains the inspection and life-management approaches that can be adopted to optimize long term plant operation, and considers the technical and economic issues involved in meeting variable energy demands. - Summarizes key research on coal-fired power plant materials, their behavior under operational loads, and approaches to life assessment and defect management - Details the range of structural alloys used in coal power plants, and the life assessment techniques applicable to defect-free components under operational loads - Reviews the life assessment techniques applicable to components containing defects and the approaches that can be adopted to optimize plant operation and new plant and component design

In March 2011 the Fukushima nuclear power plant (NPP) in Japan was hit by an earthquake and subsequent tsunami which resulted in the release of significant amounts of radioactive material. The incident led to the suspension of nuclear programmes by a number of countries. This book provides a definitive account of the accident. - Outlines the main sequence of events of the 2011 Fukushima nuclear power plant accident, considers the responses of central and local government, and evaluates the response of the plant owner TEPCO - Describes and assesses the effectiveness of the evacuation process and subsequent decontamination of the site and local area - Offers recommendations for improving the safe design and operation of nuclear power plants and considers the future of the Fukushima plant and nuclear power generation in Japan

Reactor Pressure Vessels (RPVs) contain the fuel and therefore the reaction at the heart of nuclear power plants. They are a life-determining structural component: if they suffer serious damage, the continued operation of the plant is in jeopardy. This book critically reviews irradiation embrittlement, the main degradation mechanism affecting RPV steels, and mitigation routes for managing the RPV lifetime. Part I reviews RPV design and fabrication in different countries, with an emphasis on the materials required, their important properties, and manufacturing technologies. Part II then considers RVP embrittlement in operational nuclear power plants using different reactors. Chapters are devoted to embrittlement in light-water reactors, including WWER-type reactors and Magnox reactors. Finally, Part III presents techniques for studying embrittlement, including irradiation simulation techniques, microstructural characterisation techniques, and probabilistic fracture mechanics. Irradiation Embrittlement of Reactor Pressure Vessels (RPVs) in Nuclear Power Plants provides a thorough review of an issue that is central to the safety of nuclear power generation. The book includes contributions from an international team of experts, and will be a useful resource for nuclear plant operators and managers, relevant regulatory and safety bodies, nuclear metallurgists and other academics in this field - Discusses reactor pressure vessel (RPV) design and the effect irradiation embrittlement can have, the main degradation mechanism affecting RPVs - Examines embrittlement processes in RPVs in different reactor types, as well as techniques for studying RPV embrittlement

Small modular reactors (SMRs) are an advanced, safe type of nuclear reactor technology that are suitable for small and medium sized applications including both power and heat generation. In particular, their use as individual units or in combination to scale-up capacity offer benefits in terms of siting, installation, operation, lifecycle and economics in comparison to the development of larger nuclear plant for centralised electricity power grids. Interest has increased in the research and development of SMRs for both developing countries as well as such additional cogeneration options as industrial/chemical process heat, desalination and district heating, and hydrogen production. This book reviews key issues in their development as well as international R&D in the field. - Gives an overview of small modular reactor technology - Reviews the design characteristics of integral pressurized water reactors and focuses on reactor core and fuel technologies, key reactor system components, instrumentation and control, human-system interfaces and safety - Considers the economics, financing, licensing, construction methods and hybrid energy systems of small modular reactors - Describes SMR development activities worldwide, and concludes with a discussion of how SMR deployment can contribute to the growth of developing countries

Uranium for Nuclear Power: Resources, Mining and Transformation to Fuel discusses the nuclear industry and its dependence on a steady supply of competitively priced uranium as a key factor in its long-term sustainability. A better understanding of uranium ore geology and advances in exploration and mining methods will facilitate the discovery and exploitation of new uranium deposits. The practice of efficient, safe, environmentally-benign exploration, mining and milling technologies, and effective site decommissioning and remediation are also fundamental to the public image of nuclear power. This book provides a comprehensive review of developments in these areas. - Provides researchers in academia and industry with an authoritative overview of the front end of the nuclear fuel cycle - Presents a comprehensive and systematic coverage of geology, mining, and conversion to fuel, alternative fuel sources, and the environmental and social aspects - Written by leading experts in the field of nuclear power, uranium mining, milling, and geological exploration who highlight the best practices needed to ensure environmental safety

Nuclear sites become contaminated with radionuclides due to accidents and activities carried out without due consideration for the environment. Naturally-occurring radioactive materials (NORM) released by industrial processes such as coal power production and fertilizer manufacture may also require clean-up. Environmental remediation and restoration aim to reduce exposure to radiation from contaminated soil or groundwater. This book provides a comprehensive overview of this area. Part 1 provides an introduction to the different types of contaminated site and their characteristics. Part 2 addresses environmental restoration frameworks and processes. Part 3 then reviews different remediation techniques and methods of waste disposal. - Explores types and characteristics of contaminated nuclear and NORM sites - Provides an in depth guide to environmental restoration frameworks and processes including stakeholder involvement, risk assessment and cost-benefit analysis in the remediation and restoration of contaminated nuclear and NORM sites - Offers coverage of remediation techniques and waste disposal from electrokinetic remediation to in situ and ex situ bioremediation of radionuclides contaminated soils

Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants provides researchers in academia and industry with an essential overview of the stronger high-temperature materials required for key process components, such as membrane wall tubes, high-pressure steam piping and headers, superheater tubes, forged rotors, cast components, and bolting and blading for steam turbines in USC power plants. Advanced materials for future advanced ultra-supercritical power plants, such as superalloys, new martensitic and austenitic steels, are also addressed. Chapters on international research directions complete the volume. The transition from conventional subcritical to supercritical thermal power plants greatly increased power generation efficiency. Now the introductions of the ultra-supercritical (USC) and, in the near future, advanced ultra-supercritical (A-USC) designs are further efforts to reduce fossil fuel consumption in power plants and the associated carbon dioxide emissions. The higher operating temperatures and pressures found in these new plant types, however, necessitate the use of advanced materials. - Provides researchers in academia and industry with an authoritative and systematic overview of the stronger high-temperature materials required for both ultra-supercritical and advanced ultra-supercritical power plants - Covers materials for critical components in ultra-supercritical power plants, such as boilers, rotors, and turbine blades - Addresses advanced materials for future advanced ultra-supercritical power plants, such as superalloys, new martensitic and austenitic steels - Includes chapters on technologies for welding technologies

Current fleets of conventional and nuclear power plants face increasing hostile environmental conditions due to increasingly high temperature operation for improved capacity and efficiency, and the need for long term service. Additional challenges are presented by the requirement to cycle plants to meet peak-load operation. This book presents a comprehensive review of structural materials in conventional and nuclear energy applications. Opening chapters address operational challenges and structural alloy requirements in different types of power plants. The following sections review power plant structural alloys and methods to mitigate critical materials degradation in power plants.