Once a nuclear installation has reached the end of its safe and economical operational lifetime, the need for its decommissioning arises. Different strategies can be employed for nuclear decommissioning, based on the evaluation of particular hazards and their attendant risks, as well as on the analysis of costs of clean-up and waste management. This allows for decommissioning either soon after permanent shutdown, or perhaps a long time later, the latter course allowing for radioactivity levels to drop in any activated or contaminated components. It is crucial for clear processes and best practices to be applied in decommissioning such installations and sites, particular where any significant health and environmental risks exist.This book critically reviews the nuclear decommissioning processes and technologies applicable to nuclear power plants and other civilian nuclear facilities. Part one focuses on the fundamental planning issues in starting a nuclear decommissioning process, from principles and safety regulations, to financing and project management. Part two covers the execution phase of nuclear decommissioning projects, detailing processes and technologies such as dismantling, decontamination, and radioactive waste management, as well as environmental remediation, site clearance and reuse. Finally, part three details international experience in the decommissioning of nuclear applications, including the main nuclear reactor types and nuclear fuel cycle facilities, as well as small nuclear facilities and legacy nuclear waste sites. - Critically reviews nuclear decommissioning processes and technologies applicable to nuclear power plants and other civilian nuclear facilities - Discusses the fundamental planning issues in starting a nuclear decommissioning process - Considers the execution phase of nuclear decommissioning projects, including dismantling, decontamination, and radioactive waste management, as well as environmental remediation, site clearance and reuse

Understanding the behaviour of gases in the context of radioactive waste disposal is a fundamental requirement in developing a safety case for the disposal of radioactive waste. Of particular importance are the long-term performance of bentonite buffers and cement-based backfill materials that may be used to encapsulate and surround the waste in a repository, and the behaviour of plastic clays, indurated mudrocks and crystalline formations that may be the host rocks for a repository. The EC Euratom programme funded project, FORGE, has provided new insights into the processes and mechanisms governing gas generation and migration with the aim of reducing uncertainty. This volume brings together papers on aspects of this topic arising from both the FORGE project and work undertaken elsewhere. This has been achieved by the acquisition of new experimental data coupled with modelling, through a series of laboratory and field-scale experiments performed at a number of underground research laboratories throughout Europe.

This Special Publication contains 43 scientific studies presented at the 5th conference on ‘Clays in natural and engineered barriers for radioactive waste confinement’ held in Montpellier, France in 2012. The conference and this resulting volume cover all the aspects of clay characterization and behaviour considered at various temporal and spatial scales relevant to the confinement of radionuclides in clay, from basic phenomenological process descriptions to the global understanding of performance and safety at repository and geological scales. Special emphasis has been given to the modelling of processes occurring at the mineralogical level within the clay barriers. The papers in this Special Publication consider research into argillaceous media under the following topic areas: large-scale geological characterization; clay-based concept/large-scale experiments; hydrodynamical modelling; geochemistry; geomechanics; mass transfer/gas transfer; mass transfer mechanisms. The collection of different topics presented in this Special Publication demonstrates the diversity of geological repository research.

Waste management can be problematic. Especially with the emphasis in many countries now being on sustainability, there is a great need for more research on disposal methods. While we have found ways to reduce the volume of waste that needs to disposed. questions remain about the environmental and safety aspects of certain recycled materials and the by-products of waste management activities, current technology improvements, and regulatory and monitoring problems. Featuring papers published at the Sixth International Conference on Waste Management and the Environment, this book contains contributions on the topics such as: Advanced Waste Treatment Technology, Wastewater Treatment; Resources Recovery; Waste Incineration and Gasification; Waste Pre-Treatment; Separation and Transformation; Landfills; Soil and Groundwater Clean-up; Public Awareness; Air Pollution Control; Hazardous Waste, Waste Management; Construction and Demolition Waste Costs; Waste Reduction; Reuse and Recycling, Energy from Waste; Electrical Waste; Rare Metals; Computer Modelling; Methodologies and Practices; Risk Assessment; Nuclear Waste; Environmental Economics Assessment; Laws and Regulations; Biological Treatments; Agricultural Wastes.

This book presents the application of system analysis techniques with case studies to help readers learn how the techniques can be applied, how the problems are solved, and which sustainable management strategies can be reached.

The classification of radioactive waste varies from state to state. This results in different management procedures for each country, while following IAEA and OECD/NEA recommendations. Radioactive waste comes from numerous sources. The largest volumes are generated by the decommissioning and dismantling of nuclear facilities. Long-lived, medium- and high-activity waste – categorized as the most hazardous types of waste – are in fact largely produced by nuclear power reactors, spent fuel reprocessing plants and nuclear accidents. Final disposal of very low-activity, low-activity and very short-lived waste is well controlled. However, final solutions for certain categories, including long-lived waste, sorted waste and spent graphite waste, are not yet in place. Management of Radioactive Waste reviews all the possible solutions and presents those chosen by the various states, including a chapter detailing policy on radioactive waste management, taking France as an example.

The International Conference on Waste Management and the Environment is organised every two years by the Wessex Institute of Technology in collaboration with other institutions. This fifth conference follows the success of previous meetings held in C diz (2002), Rhodes (2004), Malta (2006) and Granada (2008). Waste Management is becoming one of the key problems of the modern world, an international issue that is intensified by the volume and complexity of domestic and industrial waste discarded by society. Unfortunately, many of the practices adopted in the past were aimed at short-term solutions without sufficient regard or knowledge for long-term implications on health, the environment or sustainability and this, in many cases, is leading to the need to take difficult and expensive remedial action. With our growing awareness of the detrimental environmental effects of current waste disposal, there is a significant onus of accountability for effective waste management. Better practice and safer solutions are required. Not only is there a need for more research on current disposal methods such as landfill, incineration, chemical and effluent treatment, but also on recycling, waste minimisation, clean technologies, waste monitoring, public and corporate awareness, and general education.