KEY FEATURES: - Provides researchers in Ocean engineering with a thorough review of the latest research in the field - Lengthy reports by leading experts - A valuable resource for all interested in ocean engineering DESCRIPTION:The International Ship and Offshore Congress (ISSC) is a forum for the exchange of information by experts undertaking and applying marine structural research. These three volumes contain the eight technical committee reports, six Specialist Committee and 2 Special Task Committee reports which were presented for the 15th International Ship and Offshore Structures Congress (ISSC 2004) in San Diego USA, between 11th and 15th August 2003. Volume III will be published in 2004 and is to contain the discussion of the reports, the chairmen's reply, the text of the invited Lecture and the congress report of ISSC 2003.

These 3 volumes contain the eight Technical Committee reports, six Specialist Committee and 2 Special Task Committee reports which were presented for the 14th International Ship and Offshore Structures Congress (ISSC 2000) in Nagasaki, Japan between 2nd and 6th October 2000.Volume III will be published in 2001 and is to contain the discussion of the above subjects.

The International Ship and Offshore Structures Congress (ISSC) is a forum for the exchange of information by experts undertaking and applying marine structural research. The aim of the ISSC is to facilitate the evaluation and dissemination of results from recent investigations, to make recommendations for standard design procedures and criteria, to discuss research in progress and planned, to identify areas requiring future research and to encourage international collaboration in furthering these aims. Ships and other marine structures used for transportation, exploration and exploitation of resources in and under the oceans are in the scope of the ISSC. The 20th International Ship and Offshore Structures Congress (ISSC 2018) was held in (Liège) Belgium and Amsterdam (The Netherlands), 9–14 September 2018. The first volume of the proceedings contains the eight Technical Committee reports presented and discussed at the conference and the second volume contains the reports of the eight Specialist Committees. This third volume contains the Official discusser's reports, written discussions and floor discussions, and the replies by the committees.

This three-volume work presents the proceedings from the 19th International Ship and Offshore Structures Congress held in Cascais, Portugal on 7th to 10th September 2015. The International Ship and Offshore Structures Congress (ISSC) is a forum for the exchange of information by experts undertaking and applying marine structural research.The aim of

This proceedings contains the papers presented at The 8th International Symposium on Practical Design of Ships and Other Floating Structures held in China in September 2001 - the first PRADS of the 21st Century. The overall aim of PRADS symposia is to advance the design of ships and other floating structures as a professional discipline and science by exchanging knowledge and promoting discussion of relevant topics in the fields of naval architecture and marine and offshore engineering. In line with the aim, in welcoming the new era, this Symposium is intended to increase international co-operation and give a momentum for the new development of design and production technology of ships and other floating structures for efficiency, economy, safety, and environmental production. The main themes of this Symposium are Design Synthesis, Production, Hydrodynamics, Structures and Materials of Ships and Floating Systems. Proposals for over 270 papers from 26 countries and regions within the themes were received for PRADS 2001, and about 170 papers were accepted for presentation at the symposium. With the high quality of the proposed papers the Local Organising Committee had a difficult task to make a balanced selection and to control the total number of papers for fitting into the allocated time schedule approved by the Standing Committee of PRADS. Volume I covers design synthesis, production and part of hydrodynamics. Volume II contains the rest of hydrodynamics, and structures and materials.

This book offers state-of-the-art developments in the collision and grounding of ship and offshore structures. The topics covered by the contributions include: dynamics of vessels in collision and grounding; collision and grounding in Arctic conditions; collision and grounding statistics and measures of the probability of incidents; risk assessment of collision and grounding; measures for reduction of collision and grounding, machine learning methods for the evaluation of probabilistic collision and grounding risk; new designs for improvement of structural resistance to collisions; analysis of ultimate strength of damaged ship structures; design of buffer bows to reduce collision consequences; innovative navigation systems for safer sea transportation, collision between ships and offshore structures; collision between ships and fixed or floating bridges, collision and grounding experiments; properties of materials under impact loadings; residual strength of damaged ships and offshore structures; hull girder response of ships under severe dynamic loadings. The book is aimed at naval architects, marine engineers and scientists. The ICCGS conferences aim to present state-of-the-art methods for analysis and design against collision and grounding of ships, collisions between ships and icebergs, offshore structures, bridges, submerged tunnels and waterfront structures. Previous conferences were held in: San Francisco, USA in 1996; Copenhagen, Denmark in 2001; Tokyo, Japan in 2004; Hamburg, Germany in 2007; Helsinki, Finland in 2010; Trondheim, Norway in 2013; Ulsan, South Korea in 2016, and Lisbon, Portugal in 2019. The Proceedings in Marine Technology and Ocean Engineering series is devoted to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of ‘Marine Technology and Ocean Engineering’. The Series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) Conferences, the Marine Structures (MARSTRUCT) Conferences, the Renewable Energies Offshore (RENEW) Conferences and the Maritime Technology (MARTECH) Conferences, and the Collision and Grounding of Ships and Offshore Structures (ICCGS) conferences. The ‘Marine Technology and Ocean Engineering’ series is also open to new conferences that cover topics on the sustainable exploration and exploitation of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and its resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.

"Vive la Revolution!" was the theme of the Twenty-Third Symposium on Naval Hydrodynamics held in Val de Reuil, France, from September 17-22, 2000 as more than 140 experts in ship design, construction, and operation came together to exchange naval research developments. The forum encouraged both formal and informal discussion of presented papers, and the occasion provides an opportunity for direct communication between international peers. This book includes sixty-three papers presented at the symposium which was organized jointly by the Office of Naval Research, the National Research Council (Naval Studies Board), and the Bassin d'Essais des Carènes. This book includes the ten topical areas discussed at the symposium: wave-induced motions and loads, hydrodynamics in ship design, propulsor hydrodynamics and hydroacoustics, CFD validation, viscous ship hydrodynamics, cavitation and bubbly flow, wave hydrodynamics, wake dynamics, shallow water hydrodynamics, and fluid dynamics in the naval context.

Load and Global Response of Ships gives an introductory background to naval architecture statistics and strength of materials. Each subject is treated in detail; starting from the first principle. The aim of this title was to derive and present the necessary theoretical framework for predicting the extreme loads and the corresponding hull girder stresses that a ship may be subjected to during its operational lifetime.Although some account is given to reliability analysis, the present treatment has to be supplemented with methods for detailed stress evaluation and for structural strength assessment before a complete structural reliability analysis can be carried out.The classification societies have issued rules and regulations for a proper structural analysis of a ship and selection of the scantlings. Previously, those rules rather explicitly gave formulae for the thickness of the hull plantings, the size of the stiffeners etc. Such empirical rules must necessarily be rather conservative in order to apply to a large variety of ships. With the advent of powerful computers, the rules have changed. Today, the naval architect can perform the structural analysis using mainly rational methods based on first principles. The classification society may then specify proper safety factors against local global failure modes, taking into account the consequences of failure and the analysis procedure used. A cruder method of analysis then necessitates a larger safety factor. Therefore the effort made by the experienced naval architect to perform a detailed structural analysis will be returned not just by a rational structural arrangement but also often in lower weight of the ship and thus a higher payload throughout the operational lifetime of the ship.This analysis has attempted to make explicit one way in which designers limit the design space by creating rules to which they expect users to adhere. It is also an attempt to encourage designers to reconsider the 'rules of use' that they have used in their designs, so as to reconceptualise potential usage. This can help design behaviour where rule use is not blindly followed.By making these rules visible, it is possible to expose the limitations of current technology, and development design solutions that do not restrict use to the 'normal' case of action. Rules are useful to designers because they are simplifications of activity. Rules encode the normal case, and these are simplistic representations of work that are, in many cases, accurate enough for the purpose of design. However, encoding behaviour in rules has dangers in that they do not encompass the whole range of behaviours that can be performed. Using examples, this title shows that being able to break rules means that people are able to engage in a richer more flexible set of actions (and therefore more appropriate to contingency) than when they are constrained to a limited range.

This book gathers the peer-reviewed proceedings of the 14th International Symposium, PRADS 2019, held in Yokohama, Japan, in September 2019. It brings together naval architects, engineers, academic researchers and professionals who are involved in ships and other floating structures to share the latest research advances in the field. The contents cover a broad range of topics, including design synthesis for ships and floating systems, production, hydrodynamics, and structures and materials. Reflecting the latest advances, the book will be of interest to researchers and practitioners alike.