Reconfigurable RF Power Amplifiers on Silicon for Wireless Handsets is intended to designers and researchers who have to tackle the efficiency/linearity trade-off in modern RF transmitters so as to extend their battery lifetime. High data rate 3G/4G standards feature broad channel bandwidths, high dynamic range and critical envelope variations which generally forces the power amplifier (PA) to operate in a low efficiency “backed-off” regime. Classic efficiency enhancement techniques such as Envelope Elimination and Restoration reveal to be little compliant with handset-dedicated PA implementation due to their channel-bandwidth-limited behavior and their increased die area consumption and/or bill-of-material. The architectural advances that are proposed in this book circumvent these issues since they put the stress on low die-area /low power-consumption control circuitry. The advantages of silicon over III/V technologies are highlighted by several analogue signal processing techniques that can be implemented on-chip with a power amplifier. System-level and transistor-level simulations are combined to illustrate the principles of the proposed power adaptive solutions. Measurement on BICMOS demonstrators allows validating the functionality of dynamic linearity/efficiency management. In Reconfigurable RF Power Amplifiers on Silicon for Wireless Handsets, PA designers will find a review of technologies, architectures and theoretical formalisms (Volterra series...) that are traditionally related to PA design. Specific issues that one encounters in power amplifiers (such as thermal / memory effects, stability, VSWR sensitivity...) and the way of overcoming them are also extensively considered throughout this book.

RF and mm-Wave Power Generation in Silicon presents the challenges and solutions of designing power amplifiers at RF and mm-Wave frequencies in a silicon-based process technology. It covers practical power amplifier design methodologies, energy- and spectrum-efficient power amplifier design examples in the RF frequency for cellular and wireless connectivity applications, and power amplifier and power generation designs for enabling new communication and sensing applications in the mm-Wave and THz frequencies. With this book you will learn: - Power amplifier design fundamentals and methodologies - Latest advances in silicon-based RF power amplifier architectures and designs and their integration in wireless communication systems - State-of-the-art mm-Wave/THz power amplifier and power generation circuits and systems in silicon - Extensive coverage from fundamentals to advanced design topics, focusing on various layers of abstraction: from device modeling and circuit design strategy to advanced digital and mixed-signal architectures for highly efficient and linear power amplifiers - New architectures for power amplifiers in the cellar and wireless connectivity covering detailed design methodologies and state-of-the-art performances - Detailed design techniques, trade-off analysis and design examples for efficiency enhancement at power back-off and linear amplification for spectrally-efficient non-constant envelope modulations - Extensive coverage of mm-Wave power-generation techniques from the early days of the 60 GHz research to current state-of the-art reconfigurable, digital mm-Wave PA architectures - Detailed analysis of power generation challenges in the higher mm-Wave and THz frequencies and novel technical solutions for a wide range for potential applications, including ultrafast wireless communication to sensing, imaging and spectroscopy - Contributions from the world-class experts from both academia and industry

In today’s connected world, the demand for mobile communications and instant access to information, anytime and anywhere, has drastically changed the electronics landscape, both consumer and industrial. Novel 5G and 6G systems will enable connectivity in all forms between humans, devices, machines, and any objects. They will provide virtually ubiquitous, ultra-high bandwidth and low latency network access to individual users, as well as to all objects benefiting from being connected. They will be the "eyes and ears" of Artificial Intelligence systems as it will provide real-time data collection and analysis. Such diversity calls for a new paradigm in terms of flexibility, not only related to performance, but also in terms of scalability and cost. 5G and 6G communication systems imply a major stake of sovereignty and autonomy for the communication sector and digital infrastructures of the future. All products related to IoT, traffic, and health care, supported by connectivity will benefit the citizens in their daily lives to improve everything from business to private affairs. Together, this will influence society as much as smart phones did in the recent past. It is all about communication and connectivity. This book provides an overview of the latest research results in this field. It is based on the close collaboration in the BEYOND5 project, extended with vision and roadmap insights by European experts leading the 6G development. The BEYOND5 project has built a completely European supply chain for Radio-Frequency Electronics, enabling new RF domains for sensing, communication, 5G radio infrastructure and beyond. Moving forward into higher frequency bands above 100 GHz for 6G, also more disruptive technologies, using heterogeneous integration of CMOS, SOI, and III/V components such as GaN or InP, and advanced packaging techniques will be necessary to realize the objectives of ubiquitous, ultra-high bandwidth and low latency networks. The book bundles the scientific content of the International Workshop on "Technologies enabling future mobile connectivity & sensing" in Lisbon, Portugal 10 September 2023, as part of the ESSCIRC/ESSDERC 2023 European Solid-state Circuits and Devices Conference. Through articles and abstracts, a combined view of experts and practitioners representing academia, research, and industry in the field of wireless communication systems is given. They cover the topics of RF and digital SOI technology development for 5 and 6G, device and substrate characterization, packaging technology, and the realization of full systems including power amplifiers, linearization techniques, beamforming transceivers, access points, and radar detection.

An Industry Perspective on Key Tunable Technologies and Applications Tunable RF Components and Circuits: Applications in Mobile Handsets provides a technical introduction to the state of the art in tunable radio frequency (RF) components, circuits, and applications and discusses the foundational work that has been done to date. Leading practitioners in the field share their expertise on tunable devices in mobile handset applications. Through these practical viewpoints, readers discover how to use tunable RF techniques and devices to develop successful product designs. A substantial portion of the book focuses on antennas and antenna tuning, reflecting the dominance of the antenna tuning application in today’s commercial market for tunable RF. The book explains how RF-microelectromechanical systems (RF-MEMS), barium strontium titinate (BST), silicon-on-insulator (SOI) field effect transistors (FETs), and high-performance complementary metal oxide semiconductors (CMOS) are used as enabling technologies for tunable functions in current and next-generation radio architectures. The book also describes power amplifier envelope tracking, an emerging and important technique for improving efficiency; presents a network operator’s perspective on the evolution of the handset front end; and explores emerging approaches to production testing of wireless devices.

This book tackles the 6G odyssey, providing a concerted technology roadmap towards the 6G vision focused on the interoperability between the wireless and optical domain, including the benefits that are introduced through virtualization and software defined radio. The authors aim to be at the forefront of beyond 5G technologies by reflecting the integrated works of several major European collaborative projects (H2020-ETN-SECRET, 5GSTEPFWD, and SPOTLIGHT). The book is structured so as to provide insights towards the 6G horizon, reporting on the most recent developments on the international 6G research effort. The authors address a variety of telecom stakeholders, which includes practicing engineers on the field developing commercial solutions for 5G and beyond products; postgraduate researchers that require a basis on which to build their research by highlighting the current challenges on radio, optical and cloud-based networking for ultra-dense networks, including novel approaches; and project managers that could use the principles and applications for shaping new research proposals on this highly dynamic field.

This book is focused on addressing the designs of FinFET-based analog ICs for 5G and E-band communication networks. In addition, it also incorporates some of the contemporary developments over different fields. It highlights the latest advances, problems and challenges and presents the latest research results in the field of mm-wave integrated circuits designing based on scientific literature and its practical realization. The traditional approaches are excluded in this book. The authors cover various design guidelines to be taken care for while designing these circuits and detrimental scaling effects on the same. Moreover, Gallium Nitrides (GaN) are also reported to show huge potentials for the power amplifier designing required in 5G communication network. Subsequently, to enhance the readability of this book, the authors also include real-time problems in RFIC designing, case studies from experimental results, and clearly demarking design guidelines for the 5G communication ICs designing. This book incorporates the most recent FinFET architecture for the analog IC designing and the scaling effects along with the GaN technology as well.

The RF front-end – antenna combination is a vital part of a mobile phone because its performance is very relevant to the link quality between hand-set and cellular network base-stations. The RF front-end performance suffers from changes in operating environment, like hand-effects, that are often unpredictable. Adaptive RF Front-Ends for Hand-Held Applications presents an analysis on the impact of fluctuating environmental parameters. In order to overcome undesired behavior two different adaptive control methods are treated that make RF frond-ends more resilient: adaptive impedance control, and adaptive power control. Several adaptive impedance control techniques are discussed, using a priori knowledge on matching network properties, in order to simplify robust 2-dimensional control. A generic protection concept is presented, based on adaptive power control, which improves the ruggedness of a power amplifier or preserves its linearity under extremes. It comprises over-voltage, over-temperature, and under-voltage protection.

New Materials and Devices for 5G Applications and Beyond focuses on the materials, device architectures and enabling integration schemes for 5G applications and emerging technologies. It gives a comprehensive overview of the trade-offs, challenges and unique properties of novel upcoming technologies. Starting from the application side and its requirements, the book examines different technologies under consideration for the different functions, both more conventional to exploratory, and within this context the book provides guidance to the reader on how to possibly optimize the system for a particular application. This book aims at guiding the reader through the technologies required to enable 5G applications, with the main focus on mm-wave frequencies, up to THz. New Materials and Devises for 5G Applications and Beyond is suitable for industrial researchers and development engineers, and researchers in materials science, device engineering and circuit design. - Reviews challenges and emerging opportunities for materials, devices, and integration to enable 5G technologies - Includes discussion of technologies such as RF-MEMs, RF FINFETs, and transistors based on current and emerging materials (InP, GaN, etc.) - Focuses on mm-wave frequencies up to the terahertz regime

This issue of ECS Transactions covers emerging materials, process and technology options for large-area silicon wafers to enhance advanced IC performance or to enable revolutionary device structures with entirely new functionalities. Topics : high-mobility channel materials, (e.g. strained Si/Ge, compound semiconductors and graphene), high-performance gate stacks and low-resistivity junctions and contacts on new, Si-compatible materials; new materials and processes for 3-D (TSV) integration ; synthesis of nano-structures including wires, pores and membranes of Si-compatible materials; novel MEMS/NEMS structures and their integration with the mainstream Si-IC technology.