This book investigates and discusses the hardware design and implementation to achieve smart air interfaces with a reduced number of Radio Frequency (RF) transmitter and receiver chains, or even with a single reconfigurable RF-Frontend in the user terminal. Various hardware challenges are identified and addressed to enable the implementation of autonomous reconfigurable RF-Frontend architectures. Such challenges are (i) the conception of a transceiver with wide tuning range of at least up to 6 GHz, (ii) the system integration of reconfigurable technologies targeting current compact devices that demand voltages up to 100 V for adaptive controlling and (iii) the realization of a multiband and multistandard antenna module employing agile components to provide flexible frequency coverage. A solid design of a reconfigurable frontend is proposed from the RF part to the digital baseband. The system integration of different components in the reconfigurable RF-Frontend of a portable-oriented device architecture is demonstrated.

Reconfigurable RF-frontends aim to cope with the continuous pursuit of wider frequency coverage, higher efficiency, further compactness and lower cost of ownership. They are expected to lay the foundations of future software defined or cognitive radios. As a potential enabling technology for the frontends, the tunable ferroelectric devices have shown not only enhanced performance but also new functionalities. This book explores the recent developments in the field. It provides a cross-sectional perspective on the interdisciplinary research. With attention to the devices based on ceramic thick-films and crystal thin-films, the book reviews the adapted technologies of material synthesis, film deposition and multilayer circuitry. Next, it highlights the original classes of thin-film ferroelectric devices, including stratified metal-insulator-metal varactors with suppression of acoustic resonance and programmable bi-stable high frequency capacitors. At the end the book analyzes how the frontends can be reformed by tunable multiband antennas, tunable single- and multiband impedance matching networks and tunable substrate integrated waveguide filters, which are all built on low cost ferroelectric thick-films. For all the above devices, the theoretical analyses, modeling and design methods are elaborated, while through demonstrative prototypes the application potential is evaluated.

Summarizes cutting-edge physical layer technologies for multi-mode wireless RF transceivers. Includes original contributions from distinguished researchers and professionals. Covers cutting-edge physical layer technologies for multi-mode wireless RF transceivers. Contributors are all leading researchers and professionals in this field.

This book describes a new concept for analyzing RF/microwave circuits, which includes RF/microwave antennas. The book is unique in its emphasis on practical and innovative microwave RF engineering applications. The analysis is based on nonlinear dynamics and chaos models and shows comprehensive benefits and results. All conceptual RF microwave circuits and antennas are innovative and can be broadly implemented in engineering applications. Given the dynamics of RF microwave circuits and antennas, they are suitable for use in a broad range of applications. The book presents analytical methods for microwave RF antennas and circuit analysis, concrete examples, and geometric examples. The analysis is developed systematically, starting with basic differential equations and their bifurcations, and subsequently moving on to fixed point analysis, limit cycles and their bifurcations. Engineering applications include microwave RF circuits and antennas in a variety of topological structures, RFID ICs and antennas, microstrips, circulators, cylindrical RF network antennas, Tunnel Diodes (TDs), bipolar transistors, field effect transistors (FETs), IMPATT amplifiers, Small Signal (SS) amplifiers, Bias-T circuits, PIN diode circuits, power amplifiers, oscillators, resonators, filters, N-turn antennas, dual spiral coil antennas, helix antennas, linear dipole and slot arrays, and hybrid translinear circuits. In each chapter, the concept is developed from the basic assumptions up to the final engineering outcomes. The scientific background is explained at basic and advanced levels and closely integrated with mathematical theory. The book also includes a wealth of examples, making it ideal for intermediate graduate level studies. It is aimed at electrical and electronic engineers, RF and microwave engineers, students and researchers in physics, and will also greatly benefit all engineers who have had no formal instruction in nonlinear dynamics, but who now desire to bridge the gap between innovative microwave RF circuits and antennas and advanced mathematical analysis methods.

The inadequate use of wireless spectrum resources has recently motivated researchers and practitioners to look for new ways to improve resource efficiency. As a result, new cognitive radio technologies have been proposed as an effective solution. The Handbook of Research on Software-Defined and Cognitive Radio Technologies for Dynamic Spectrum Management examines the emerging technologies being used to overcome radio spectrum scarcity. Providing timely and comprehensive coverage on topics pertaining to channel estimation, spectrum sensing, communication security, frequency hopping, and smart antennas, this research work is essential for use by educators, industrialists, and graduate students, as well as academicians researching in the field.

This book describes the design of CMOS circuits for ultra-low power consumption including analog, radio frequency (RF), and digital signal processing circuits (DSP). The book addresses issues from circuit and system design to production design, and applies the ultra-low power circuits described to systems for digital hearing aids and capsule endoscope devices. Provides a valuable introduction to ultra-low power circuit design, aimed at practicing design engineers; Describes all key building blocks of ultra-low power circuits, from a systems perspective; Applies circuits and systems described to real product examples such as hearing aids and capsule endoscopes.

This book provides readers with detailed explanation of the design principles of CMOS integrated circuits for wireless medical and health care, from the perspective of two successfully-commercialized applications. Design techniques for both the circuit block level and the system level are discussed, based on real design examples. CMOS IC design techniques for the entire signal chain of wireless medical and health care systems are covered, including biomedical signal acquisition, wireless transceivers, power management and SoC integration, with emphasis on ultra-low-power IC design techniques.

This book investigates solutions, benefits, limitations, and costs associated with multi-standard operation of RF front-ends and their ability to adapt to variable radio environments. Next, it highlights the optimization of RF front-ends to allow maximum performance within a certain power budget, while targeting full integration. Finally, the book investigates possibilities for low-voltage, low-power circuit topologies in CMOS technology.

This book provides comprehensive knowledge, aimed at practicing integrated circuit design engineer or researcher, to learn and design a low noise amplifier (LNA) for single and multiband applications. The content is structured in a way so that even a beginner can follow the design method easily. This book features the following characteristics: different types of LNA designs (with key building blocks) are discussed, and detailed analysis is given for each LNA design, which covers from the fundamental and principal knowledge to the justification of the design approach. Detailed design approaches are using 180 nm and 130nm CMOS technologies, purposely presented in this manner to give exposure to the design of LNA under different technologies. The LNAs in this book are designed for GSM, WCDMA and WLAN standards, but the same method can be used for other frequencies of operation. Comprehensive analyses on the extreme or corner condition effects are highlighted. Besides, detailed derivation of equations relating to the parameters of the LNA’s performance metrics help LNA designers in understanding how the performance metrics of the LNA can be optimized to meet the desired specification. Electromagnetic analyses using Sonnet, an electromagnetic tool able to replace the conventional post-layout simulation with resistance and capacitance parasitic extraction for more accurate frequency performance prediction are presented. The electromagnetic method is proposed to be used in the LNA design as it can accurately predict the LNA’s performance before tape-out for first-pass fabrication. MATLAB codes are provided to generate important S-parameters and noise figure values.

This one-of-a-kind new resource presents cognitive radio from an antenna design perspective and introduces the concept of cognitive radio as a protocol that benefits from under-utilized regions of the spectrum. This book covers topics that govern the operation of a cognitive radio and discusses the use of reconfigurable antennas, reconfigurable filtennas, and MIMO antennas for cognitive radio. The analysis and design of different antenna systems are presented, compared and evaluated. New approaches to improve spectrum efficiency are explored by demonstrating how to design software controlled cognitive radio antenna systems. This new resource shows how to communicate using either interweave or underlay cognitive radio and demonstrates the benefits of designing appropriate sensing and communicating antennas. The first part of the book introduces the basic concept of cognitive radio and discusses the difference between cognitive radio and software defined radio from the RF system 's perspective. The second part of the book discusses the main antenna design requirements, procedures and challenges for cognitive radio. The third part of the book introduces new trends in cognitive radio implementation such as the implementation of MIMO antennas on cognitive radio, the use of machine learning techniques to optimize the performance of a cognitive radio environment, and the implementation of cognitive radar and cognitive radio in space.