The Symposium on the Scientific Basis for Nuclear Waste Manage ment was held in the fall of 1979 in Boston, Massachusetts and was one of a number of symposia included in the Annual Meeting of the Materials Research Society. The thrust of this annual Symposium is unique in the area of waste management. Recognizing that this is an area of great complexity which requires contributions from scien tists with many different backgrounds some of which are not normally associated with nuclear energy, the Materials Research Society pro vides a forum for discussions of a wide range of materials behavior and transport phenomena. As can be seen from the list of references in each paper, the authors draw heavily on contributions associated with professional societies in addition to the Materials Research Society, and this annual meeting encourages the cross-fertilization between disciplines that are essential to an adequate treatment of the problems associated with nuclear waste management. The proceed ings of the first Symposium that was held in 1978 was designated as Volume 1 in this series. The third Symposium is scheduled for 1980. The scope of the 1979 Symposium was guided by the Steering Committee: R. L. Schwoebel, Sandia Laboratories, USA (Chairman) W. Carbiener, Battelle Memorial Institute, Columbus, USA D. Ferguson, Oak Ridge National Laboratory, USA W. Heimerl, DWK, Mol, Belgium W. Lutze, Hahn Meitner Institut, Berlin, W. Germany J. D. Mather, Institute of Geological Sciences, Harwell, UK G. Oertel, Department of Energy, USA R.

During late 1978, a symposium entitled "Science Underlying Radioactive Waste Management" was one component of the Annual Meet ing of the Materials Research Society held in Boston, Massachusetts. The purpose of this Symposium was to bring together for the first time the entire range of sciences that form the basis for the treatment, solidification and isolation of radioactive wastes. Some 79 papers were presented to an international audience of over 300. The Symposium was such an impressive success that another will be held at the 1979 Annual Meeting of the Materials Research Society. The proceedings of the forthcoming symposium will also be published and it is for this reason that the present volume has been desig nated Volume 1. The scope of the Symposium was defined by the following steer ing committee: Rustum Roy, The Pennsylvania State University (Chairman) Richard S. Claassen, Sandia Laboratories Don Ferguson, Oak Ridge National Laboratory Victor I. Spitsyn, U.S.S.R. Academy of Sciences, Moscow David B. Stewart, United States Geological Survey Torbjorn Westermark, Royal Institute of Technology, Stockholm. The program was organized by the following committee: Gregory J. McCarthy, The Pennsylvania State University (Cha- man) Harry C. Burkholder, Battelle Memorial Institute Arnold M. Friedman~ Argonne National Laboratory Werner Lutze, Hahn-Meitner Institut, Berlin John G. Moore, Oak Ridge National Laboratory Robert W. Potter, II, United States Geological Survey Richard L. Schwoebe1, Sandia Laboratories Roger W. Staehle, Ohio State University.

The papers included in this issue of ECS Transactions were originally presented in the symposium ¿Corrosion Issues in Nuclear Waste Storage: A Symposium in Honor of the 65th Birthday of David Shoesmith¿, held during the 218th meeting of The Electrochemical Society, in Las Vegas, Nevada from October 10 to 15, 2010.

This reviews sources of radioactive waste and introduces radioactive decay and radiation shielding calculations. It covers technical and regulatory aspects of waste management with discussion questions at the end of each chapter to provide an opportunity to explore the many facets of waste management issues. An extensive reference list at the end of each chapter retains the references from the first edition of the book and incorporates references used in preparing this revised text, giving readers an opportunity to look at historical records as well as current information.

Corrosion of Ceramic and Composite Materials, Second Edition is a primary source of guidance for the assessment, interpretation, and inhibition of corrosion phenomena. This book discusses all aspects of corrosion of ceramics, including environments, mechanisms, and materials, and the means to minimize or eliminate corrosion. The author compiles key findings and literature highlights from nearly a decade of scientific advancement, covering emerging techniques in corrosion analysis, characterization, and prediction. He provides at-a-glance coverage of national and international testing procedures for the evaluation of materials stability. The book covers the fundamentals of corrosion by gases, liquids, and solids of several ceramic materials including crystalline materials, glasses, composites, bioceramics, and advanced ceramics. It also discusses property/corrosion relationships and testing. The book collects a generous number of models, figures, and studies illustrating techniques to minimize and reduce the effects of various mechanisms contributing to the corrosion of civil, aerospace, and military structures. The second edition includes a review of all the current literature since publication of the first edition, an additional chapter on composites, and major sections added on bioceramics and weathering of construction materials. Corrosion of Ceramic and Composite Materials, Second Edition explains existing corrosion problems and offers an excellent guide to the design and development of corrosion-resistant structures.

Treatise on Materials Science and Technology, Volume 28: Glass IV covers the developments in glass science and technology. The book discusses the use of silicon dioxide films in semiconductor devices; the nuclear waste glasses; and the synthesis and properties of oxynitride glasses. The text also describes the preparation, the properties, and the applications of heavy-metal fluoride glasses; and an analytical model of viscoelasticity in seals. Materials scientists and materials engineers will find the book invaluable.