This book is devoted to recent developments of instrumentation and measurement techniques applied to the aerospace field. It includes 23 selected papers from the 2019 IEEE International Workshop on Metrology for AeroSpace. Measurements are essential for obtaining a deeper knowledge of a phenomenon or an asset, as well as for making proper decisions and proposing new and efficient solutions, and this is especially true in environments as complex as aerospace. The research contributions included in the book can raise the interest of a wide group of researchers, operators and decision-makers from metrology and aerospace fields by presenting the most innovative solutions in this field from the scientific and technological points of view.

This Special Issue is devoted to recent developments in instrumentation and measurement techniques applied to the marine field. ¶The sea is the medium that has allowed people to travel from one continent to another using vessels, even today despite the use of aircraft. It has also been acting as a great reservoir and source of food for all living beings. However, for many generations, it served as a landfill for depositing conventional and nuclear wastes, especially in its deep seabeds, and we are assisting in a race to exploit minerals and resources, different from foods, encompassed in it. Its health is a great challenge for the survival of all humanity since it is one of the most important environmental components targeted by global warming. ¶ As everyone may know, measuring is a step that generates substantial knowledge about a phenomenon or an asset, which is the basis for proposing correct solutions and making proper decisions. However, measurements in the sea environment pose unique difficulties and opportunities, which is made clear from the research results presented in this Special Issue.

The attention of many developed countries has increasingly focused on the security and protection of critical infrastructure. The use of Unmanned Systems (USs) for this purpose has been growing rapidly in recent years, as advances in technology, increased versatility and smaller size, together with the reduced risks and costs associated with removing the need for a pilot or operator on board, have all made these systems more attractive. This book, Monitoring and Protection of Critical Infrastructure by Unmanned Systems, presents 15 papers delivered at the NATO Advanced Training Course (ATC) of the same name hosted in Chisinau, the Republic of Moldova, from 30 May to 5 June 2022. This event was held in a hybrid format, and was attended in-person by 12 of the 31 speakers and the majority of the 92 attendees. The aim of the ATC was to explore the monitoring and protection of critical infrastructure using USs. Various USs, including ground control stations (GCS), data communication links, and a range of unmanned aerial (UAV), ground (UGV) and underwater (UUV) vehicles are covered, and the papers included here also deal with topics such as the use of drones for buildings inspection and the new technologies which can help with the recognition and monitoring of anthropogenic threats and natural hazards. There is also a focus on data analysis and modeling. Providing an overview of the use of unmanned vehicle systems and sensor-network technology for monitoring and protection, the book will be of interest to all those working to protect critical infrastructure.

This book offers a timely yet comprehensive snapshot of innovative research and developments in the area of manufacturing. It covers a wide range of manufacturing processes, such as cutting, coatings, and grinding, highlighting the advantages provided by the use of new materials and composites, as well as new methods and technologies. It discusses topics in energy generation and pollution prevention. It shows how computational methods and mathematical models have been applied to solve a number of issues in both theoretical and applied research. Based on selected papers presented at the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2019), held in Odessa, Ukraine on September 10-13, 2019, this book offers a timely overview and extensive information on trends and technologies in the area of manufacturing, mechanical and materials engineering. It is also intended to facilitate communication and collaboration between different groups working on similar topics, and to offer a bridge between academic and industrial researchers.

The book focuses the latest endeavours relating researches and developments conducted in fields of Control, Robotics and Automation. Through more than ten revised and extended articles, the present book aims to provide the most up-to-date state-of-art of the aforementioned fields allowing researcher, PhD students and engineers not only updating their knowledge but also benefiting from the source of inspiration that represents the set of selected articles of the book. The deliberate intention of editors to cover as well theoretical facets of those fields as their practical accomplishments and implementations offers the benefit of gathering in a same volume a factual and well-balanced prospect of nowadays research in those topics. A special attention toward “Intelligent Robots and Control” may characterize another benefit of this book.

The two-volume set LNCS 13373 and 13374 constitutes the papers of several workshops which were held in conjunction with the 21st International Conference on Image Analysis and Processing, ICIAP 2022, held in Lecce, Italy, in May 2022. The 96 revised full papers presented in the proceedings set were carefully reviewed and selected from 157 submissions. ICIAP 2022 presents the following Sixteen workshops: Volume I: GoodBrother workshop on visual intelligence for active and assisted livingParts can worth like the Whole - PART 2022Workshop on Fine Art Pattern Extraction and Recognition - FAPERWorkshop on Intelligent Systems in Human and Artificial Perception - ISHAPE 2022Artificial Intelligence and Radiomics in Computer-Aided Diagnosis - AIRCADDeep-Learning and High Performance Computing to Boost Biomedical Applications - DeepHealth Volume II: Human Behaviour Analysis for Smart City Environment Safety - HBAxSCESBinary is the new Black (and White): Recent Advances on Binary Image ProcessingArtificial Intelligence for preterm infants’ healthCare - AI-careTowards a Complete Analysis of People: From Face and Body to Clothes - T-CAPArtificial Intelligence for Digital Humanities - AI4DHMedical Transformers - MEDXFLearning in Precision Livestock Farming - LPLFWorkshop on Small-Drone Surveillance, Detection and Counteraction Techniques - WOSDETCMedical Imaging Analysis For Covid-19 - MIACOVID 2022Novel Benchmarks and Approaches for Real-World Continual Learning - CL4REAL

This two volume set LNCS 10039 and LNCS 10040 constitutes the thoroughly refereed post-conference proceedings of the Second International Conference on Cloud Computing and Security, ICCCS 2016, held in Nanjing, China, during July 29-31, 2016. The 97 papers of these volumes were carefully reviewed and selected from 272 submissions. The papers are organized in topical sections such as: Information Hiding, Cloud Computing, Cloud Security, IOT Applications, Multimedia Applications, Multimedia Security and Forensics.

This book constitutes the refereed proceedings of the First International Conference on Intelligent Technologies and Applications, INTAP 2018, held in Bahawalpur, Pakistan, in October 2018. The 68 revised full papers and 6 revised short papers presented were carefully reviewed and selected from 251 submissions. The papers of this volume are organized in topical sections on AI and health; sentiment analysis; intelligent applications; social media analytics; business intelligence;Natural Language Processing; information extraction; machine learning; smart systems; semantic web; decision support systems; image analysis; automated software engineering.

This book constitutes the refereed post-conference proceedings of the 16th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2019, held in Moscow, Russia, in July 2019. The 38 revised full papers presented were carefully reviewed and selected from 63 submissions. The papers are organized in the following topical sections: 3D modelling and data structures; PLM maturity and industry 4.0; ontologies and semantics; PLM and conceptual design; knowledge and change management; IoT and PLM; integrating manufacturing realities; and integration of in-service and operation.

This proceedings provides novel concepts and techniques for air traffic management (ATM) and communications, navigation, and surveillance (CNS) systems. The volume consists of selected papers from the 5th ENRI International Workshop on ATM/CNS (EIWAC2017) held in Tokyo in November 2017, the theme of which was “Drafting Future Skies”. Included are key topics to realize safer and more efficient skies in the future, linked to the integrated conference theme consisting of long-term visions based on presentations from various fields. The proceedings is dedicated not only to researchers, academicians, and university students, but also to engineers in the industry, air navigation service providers (ANSPs), and regulators of aviation.