The book describes the fundamentals, latest developments and use of key experimental techniques for semiconductor research. It explains the application potential of various analytical methods and discusses the opportunities to apply particular analytical techniques to study novel semiconductor compounds, such as dilute nitride alloys. The emphasis is on the technique rather than on the particular system studied.

This book includes within its scope studies of the structural, electrical, optical and acoustical properties of bulk, low-dimensional and amorphous semiconductors; computational semiconductor physics; interface properties, including the physics and chemistry of heterojunctions, metal-semiconductor and insulator-semiconductor junctions; all multi-layered structures involving semiconductor components; dopant incorporation, growth and preparation of materials, including both epitaxial (e.g. molecular beam and chemical vapour methods) and bulk techniques; and in situ monitoring of epitaxial growth processes. Also included are appropriate aspects of surface science such as the influence of growth kinetics and chemical processing on layer and device properties. The physics of semiconductor electronic and optoelectronic devices are examined, including theoretical modelling and experimental demonstration; and all aspects of the technology of semiconductor device and circuit fabrication. structures incorporating Langmuir-Blodgett films; and resists, lithography and metalisation where they are concerned with the definition of small geometry structure. The structural, electrical and optical characterisation of materials and device structures are also included. The scope encompasses materials and device reliability: reliability evaluation of technologies; failure analysis and advanced analysis techniques such as SEM, E-beam, optical emission microscopy, acoustic microscopy techniques; liquid crystal techniques; noise measurement, reliability prediction and simulation; reliability indicators; failure mechanisms, including charge migration, trapping, oxide breakdown, hot carrier effects, electro-migration, stress migration; package- related failure mechanisms; and effects of operational and environmental stresses on reliability.

This book includes within its scope studies of the structural, electrical, optical and acoustical properties of bulk, low-dimensional and amorphous semiconductors; computational semiconductor physics; interface properties, including the physics and chemistry of heterojunctions, metal-semiconductor and insulator-semiconductor junctions; all multi-layered structures involving semiconductor components. Dopant incorporation. Growth and preparation of materials, including both epitaxial (e.g. molecular beam and chemical vapour methods) and bulk techniques; in situ monitoring of epitaxial growth processes, also included are appropriate aspects of surface science such as the influence of growth kinetics and chemical processing on layer and device properties. The physics of semiconductor electronic and optoelectronic devices are examined , including theoretical modelling and experimental demonstration; all aspects of the technology of semiconductor device and circuit fabrication. Relevant areas of 'molecular electronics' and semiconductor structures incorporating Langmuir- Blodgett films; resists, lithography and metallisation where they are concerned with the definition of small geometry structure. The structural, electrical and optical characterisation of materials and device structures are also included. The scope encompasses materials and device reliability: reliability evaluation of technologies; failure analysis and advanced analysis techniques such as SEM, E-beam, optical emission microscopy, acoustic microscopy techniques; liquid crystal techniques; noise measurement, reliability prediction and simulation; reliability indicators; failure mechanisms, including charge migration, trapping, oxide breakdown, hot carrier effects, electro-migration, stress migration; package- related failure mechanisms; effects of operational and environmental stresses on reliability.

This book on solid state physics has been written with an emphasis on recent developments in quantum many-body physics approaches. It starts by covering the classical theory of solids and electrons and describes how this classical model has failed. The authors then present the quantum mechanical model of electrons in a lattice and they also discuss the theory of conductivity. Extensive reviews on the topic are provided in a compact manner so that any non-specialist can follow from the beginning.The authors cover the system of magnetism in a similar way and various problems in magnetic materials are discussed. The book also discusses the Ising chain, the Heisenberg model, the Kondo effect and superconductivity, amongst other relevant topics.In the final chapter, the authors present some works related to contemporary research topics, such as quantum entanglement in many-body systems and quantum simulations. They also include a short review of some of the possible applications of solid state quantum information in biological systems.

This book includes within its scope studies of the structural, electrical, optical and acoustical properties of bulk, low-dimensional and amorphous semiconductors; computational semiconductor physics; interface properties, including the physics and chemistry of heterojunctions, metal-semiconductor and insulator-semiconductor junctions; all multi-layered structures involving semiconductor components. Dopant incorporation. Growth and preparation of materials, including both epitaxial (e.g. molecular beam and chemical vapour methods) and bulk techniques; in situ monitoring of epitaxial growth processes, also included are appropriate aspects of surface science such as the influence of growth kinetics and chemical processing on layer and device properties. The physics of semiconductor electronic and optoelectronic devices are examined , including theoretical modelling and experimental demonstration; all aspects of the technology of semiconductor device and circuit fabrication. Relevant areas of 'molecular electronics' and semiconductor structures incorporating Langmuir-Blodgett films; resists, lithography and metallisation where they are concerned with the definition of small geometry structure. The structural, electrical and optical characterisation of materials and device structures are also included. The scope encompasses materials and device reliability: reliability evaluation of technologies; failure analysis and advanced analysis techniques such as SEM, E-beam, optical emission microscopy, acoustic microscopy techniques; liquid crystal techniques; noise measurement, reliability prediction and simulation; reliability indicators; failure mechanisms, including charge migration, trapping, oxide breakdown, hot carrier effects, electro-migration, stress migration; package- related failure mechanisms; effects of operational and environmental stresses on reliability.

This book includes within its scope studies of the structural, electrical, optical and acoustical properties of bulk, low-dimensional and amorphous semiconductors; computational semiconductor physics; interface properties, including the physics and chemistry of heterojunctions, metal-semiconductor and insulator-semiconductor junctions; all multi-layered structures involving semiconductor components. Dopant incorporation. Growth and preparation of materials, including both epitaxial (e.g. molecular beam and chemical vapour methods) and bulk techniques; in situ monitoring of epitaxial growth processes, also included are appropriate aspects of surface science such as the influence of growth kinetics and chemical processing on layer and device properties. The physics of semiconductor electronic and optoelectronic devices are examined , including theoretical modelling and experimental demonstration; all aspects of the technology of semiconductor device and circuit fabrication. Relevant areas of 'molecular electronics' and semiconductor structures incorporating Langmuir- Blodgett films; resists, lithography and metallisation where they are concerned with the definition of small geometry structure. The structural, electrical and optical characterisation of materials and device structures are also included. The scope encompasses materials and device reliability: reliability evaluation of technologies; failure analysis and advanced analysis techniques such as SEM, E-beam, optical emission microscopy, acoustic microscopy techniques; liquid crystal techniques; noise measurement, reliability prediction and simulation; reliability indicators; failure mechanisms, including charge migration, trapping, oxide breakdown, hot carrier effects, electro-migration, stress migration; package- related failure mechanisms; effects of operational and environmental stresses on reliability.

This book includes within its scope studies of the structural, electrical, optical and acoustical properties of bulk, low-dimensional and amorphous semiconductors; computational semiconductor physics; interface properties, including the physics and chemistry of heterojunctions, metal-semiconductor and insulator-semiconductor junctions; all multi-layered structures involving semiconductor components; dopant incorporation; growth and preparation of materials, including both epitaxial (e.g. molecular beam and chemical vapour methods) and bulk techniques; and in situ monitoring of epitaxial growth processes. Also included are appropriate aspects of surface science such as the influence of growth kinetics and chemical processing on layer and device properties. The physics of semiconductor electronic and optoelectronic devices are examined, including theoretical modelling and experimental demonstration; all aspects of the technology of semiconductor device and circuit fabrication. structures incorporating Langmuir-Blodgett films; resists, lithography and metalisation where they are concerned with the definition of small geometry structure. The structural, electrical and optical characterisation of materials and device structures are also included. The scope encompasses materials and device reliability: reliability evaluation of technologies; failure analysis and advanced analysis techniques such as SEM, E-beam, optical emission microscopy, acoustic microscopy techniques; liquid crystal techniques; noise measurement, reliability prediction and simulation; reliability indicators; failure mechanisms, including charge migration, trapping, oxide breakdown, hot carrier effects, electro-migration, stress migration; package-related failure mechanisms; and effects of operational and environmental stresses on reliability.

Fabrication technologies for nanostructured devices have been developed recently, and the electrical and optical properties of such nanostructures are a subject of advanced research. This book describes the different approaches to spectroscopic microscopy, i.e., Electron Beam Probe Spectroscopy, Spectroscopic Photoelectron Microscopy, and Scanning Probe Spectroscopy. It will be useful as a compact source of reference for the experienced reseracher, taking into account at the same time the needs of postgraduate students and nonspecialist researchers by using a tutorial approach throughout.