This book provides a comprehensive illustration to the superplastic forming/diffusion bonding (SPF/DB) technology developed over decades of research on titanium alloys, process modeling, and its application. SPF/DB technology plays key roles in building aviation components with complicated structures, with highly beneficial effects when well designed. With the ever-increasing demand on components with multiple layers, there is an urgent need for an updated assessment of traditional and modern SPF/DB processing methods. Success critically depends on making the most practical and effective choice of SPF/DB method for a given application. The book introduces titanium and titanium alloys, SPF/DB processing and its modeling, and applications for building typical single or multiple layer(s) structures. Particular attention is paid to illustrating the microstructure evolution during SPF/DB processes. The information for making technical decisions about optimal choice of measurement and evaluation methods is also given in the book. Each chapter follows a focused and pragmatic format. Fully illustrated throughout, the book presents the state of the art in SPF/DB technology in a manner that makes it useful for engineers to improve the established forming processes and quality of components. This book is an essential reading material for industrial practitioners, academic researchers and postgraduates.

Superplasticity is the ability of polycrystalline materials under certain conditions to exhibit extreme tensile elongation in a nearly homogeneous/isotropic manner. Historically, this phenomenon was discovered and systematically studied by metallurgists and physicists. They, along with practising engineers, used materials in the superplastic state for materials forming applications. Metallurgists concluded that they had the necessary information on superplasticity and so theoretical studies focussed mostly on understanding the physical and metallurgi cal properties of superplastic materials. Practical applications, in contrast, were led by empirical approaches, rules of thumb and creative design. It has become clear that mathematical models of superplastic deformation as well as analyses for metal working processes that exploit the superplastic state are not adequate. A systematic approach based on the methods of mechanics of solids is likely to prove useful in improving the situation. The present book aims at the following. 1. Outline briefly the techniques of mechanics of solids, particularly as it applies to strain rate sensitive materials. 2. Assess the present level of investigations on the mechanical behaviour of superplastics. 3. Formulate the main issues and challenges in mechanics ofsuperplasticity. 4. Analyse the mathematical models/constitutive equations for superplastic flow from the viewpoint of mechanics. 5. Review the models of superplastic metal working processes. 6. Indicate with examples new results that may be obtained using the methods of mechanics of solids.

Ultra fine-grained metals can show exceptional ductility, known as superplasticity, during sheet forming. The higher ductility of superplastic metals makes it possible to form large and complex components in a single operation without joints or rivets. The result is less waste, lower weight and manufacturing costs, high precision and lack of residual stress associated with welding which makes components ideal for aerospace, automotive and other applications. Superplastic forming of advanced metallic materials summarises key recent research on this important process.Part one reviews types of superplastic metals, standards for superplastic forming, processes and equipment. Part two discusses ways of modelling superplastic forming processes whilst the final part of the book considers applications, including superplastic forming of titanium, aluminium and magnesium alloys.With its distinguished editor and international team of contributors, Superplastic forming of advanced metallic materials is a valuable reference for metallurgists and engineers in such sectors as aerospace and automotive engineering.Note: The Publishers wish to point out an error in the authorship of Chapter 3 which was originally listed as: G. Bernhart, Clément Ader Institute, France. The correct authorship is: G Bernhart, P. Lours, T. Cutard, V. Velay, Ecole des Mines Albi, France and F. Nazaret, Aurock, France. The Publishers apologise to the authors for this error. - Reviews types of superplastic metals and standards for superplastic forming - Discusses the modelling of superplastic forming, including mathematical and finite element modelling - Examines various applications, including superplastic forming of titanium, aluminiun and magnesium alloys

Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources

The book presents practical and theoretical works on superplasticity in metals and ceramics, on deformation mechanisms, on processes to obtain large ultrafine-grained structures, on advanced characterization techniques, and on hot deformation of advanced materials. Key papers focus on (1) processing of metallic alloys for achieving exceptional superplastic properties, (2) high-pressure sliding (HPS) processes, (3) in-situ neutron and synchrotron methods, and (4) ultra-severe plastic deformation. Keywords: Superplasticity, Superfunctionality, High-pressure Sliding, High-pressure Torsion, Precise Forming, Numerical Simulation, Aeronautical Parts, Near-unconstrained Superplastic Parts, Low-temperature Superplasticity, Friction Stir Processing, Microstructure Evolution, Corrosion Properties, Duplex Stainless Steel, Grain Boundary Sliding, Laminated Materials, Asymmetric Hot Rolling, Uniaxial Hot Pressing, Diffusion Bonding.

As one of the eighteen field-specific reports comprising the comprehensive scope of the strategic general report of the Chinese Academy of Sciences, this sub-report addresses long-range planning for developing science and technology in the field of advanced materials science. They each craft a roadmap for their sphere of development to 2050. In their entirety, the general and sub-group reports analyze the evolution and laws governing the development of science and technology, describe the decisive impact of science and technology on the modernization process, predict that the world is on the eve of an impending S&T revolution, and call for China to be fully prepared for this new round of S&T advancement. Based on the detailed study of the demands on S&T innovation in China's modernization, the reports draw a framework for eight basic and strategic systems of socio-economic development with the support of science and technology, work out China's S&T roadmaps for the relevant eight basic and strategic systems in line with China's reality, further detail S&T initiatives of strategic importance to China's modernization, and provide S&T decision-makers with comprehensive consultations for the development of S&T innovation consistent with China's reality. Supported by illustrations and tables of data, the reports provide researchers, government officials and entrepreneurs with guidance concerning research directions, the planning process, and investment. Founded in 1949, the Chinese Academy of Sciences is the nation's highest academic institution in natural sciences. Its major responsibilities are to conduct research in basic and technological sciences, to undertake nationwide integrated surveys on natural resources and ecological environment, to provide the country with scientific data and consultations for government's decision-making, to undertake government-assigned projects with regard to key S&T problems in the process of socio-economic development, to initiate personnel training, and to promote China's high-tech enterprises through its active engagement in these areas.

As the Guest Editor of this Special Issue entitled "Science, Characterization, and Technology of Joining and Welding" of Metals, I am pleased to have this book published by MDPI. Joining, including welding, soldering, brazing, and assembly, is an essential requirement in manufacturing processes and is classified as a secondary manufacturing process. This Special Issue of Metals includes technical and review papers on, but not limited to, different aspects of joining and welding, including welding technologies (i.e., fusion-based welding and solid-state welding), characterization, metallurgy and materials science, quality control, and design and numerical simulation. This Special Issue also includes the joining of different materials, including metal and non-metals (polymers and composites), including 17 peer-reviewed papers from several researchers all around the globe (China, Germany, Brazil, South Koria, Slovakia, USA, Taiwan, Canada, and India). As of this date (April 2020), the papers in this Special Issue have been cited 47 times by other researchers, which I think is an eminent number and shows the high quality of the published papers in this Issue. This Special Issue includes a large diversity of various subjects in the field of joining: laser welding, friction stir welding, diffusion bonding, multipass welding, rotary friction-welding, friction bit joining, adhesive bonding, weldbonding, simulation and experimentation, metal/FRP joints, welding simulation, plasma–TIG coupled arc welding, liquation cracking, soldering, resin bonding, microstructural characteristics, brazing, and friction stir butt and scarf welding. I would like to sincerely thank all the researchers who contributed to this Special Issue for their high-quality research. I also would like to acknowledge Mr. Toliver Guo, Senior Assistant Editor at MDPI, who continuously and tirelessly contributed toward this Special Issue by assisting me with inviting the authors and the follow ups. I think this Special Issue will enhance our knowledge and understanding in the field of joining and assembly. I would like to dedicate this book to my wife, Mehrnoosh, for her continued support and encouragement.