Printable Solar Cells The book brings together the recent advances, new and cutting edge materials from solution process and manufacturing techniques that are the key to making photovoltaic devices more efficient and inexpensive. Printable Solar Cells provides an overall view of the new and highly promising materials and thin film deposition techniques for printable solar cell applications. The book is organized in four parts. Organic and inorganic hybrid materials and solar cell manufacturing techniques are covered in Part I. Part II is devoted to organic materials and processing technologies like spray coating. This part also demonstrates the key features of the interface engineering for the printable organic solar cells. The main focus of Part III is the perovskite solar cells, which is a new and promising family of the photovoltaic applications. Finally, inorganic materials and solution based thin film formation methods using these materials for printable solar cell application is discussed in Part IV. Audience The book will be of interest to a multidisciplinary group of fields, in industry and academia, including physics, chemistry, materials science, biochemical engineering, optoelectronic information, photovoltaic and renewable energy engineering, electrical engineering, mechanical and manufacturing engineering.

Book offers a comprehensive treatment of nonhybrid polymeric solar cells from the basic chemistry of donor and acceptor materials through device design, processing and manufacture. Written by a team of Europe-based experts, the text shows the steps and strategies of successfully moving from the science of solar cells to commercial device production. Chapters focus on technologies that lead to increased efficiencies, longer usable life and lower costs. Highlighted are ways to fabricate solar cells from a range of polymers and develop them into marketable commodities. Special consideration is given to solar cells as intellectual property.

The search for cleaner, cheaper, smaller and more efficient energy technologies has to a large extent been motivated by the development of new materials. The aim of this collection of articles is therefore to focus on what materials-based solutions can offer and show how the rationale design and improvement of their physical and chemical properties can lead to energy-production alternatives that have the potential to compete with existing technologies. In terms of alternative means to generate electricity that utilize renewable energy sources, the most dramatic breakthroughs for both mobile (i.e., transportation) and stationary applications are taking place in the fields of solar and fuel cells. And from an energy-storage perspective, exciting developments can be seen emerging from the fields of rechargeable batteries and hydrogen storage.

Encyclopedia of Renewable and Sustainable Materials, Five Volume Set provides a comprehensive overview, covering research and development on all aspects of renewable, recyclable and sustainable materials. The use of renewable and sustainable materials in building construction, the automotive sector, energy, textiles and others can create markets for agricultural products and additional revenue streams for farmers, as well as significantly reduce carbon dioxide (CO2) emissions, manufacturing energy requirements, manufacturing costs and waste. This book provides researchers, students and professionals in materials science and engineering with tactics and information as they face increasingly complex challenges around the development, selection and use of construction and manufacturing materials. Covers a broad range of topics not available elsewhere in one resource Arranged thematically for ease of navigation Discusses key features on processing, use, application and the environmental benefits of renewable and sustainable materials Contains a special focus on sustainability that will lead to the reduction of carbon emissions and enhance protection of the natural environment with regard to sustainable materials

Sustainable Material Solutions for Solar Energy Technologies: Processing Techniques and Applications provides an overview of challenges that must be addressed to efficiently utilize solar energy. The book explores novel materials and device architectures that have been developed to optimize energy conversion efficiencies and minimize environmental impacts. Advances in technologies for harnessing solar energy are extensively discussed, with topics including materials processing, device fabrication, sustainability of materials and manufacturing, and current state-of-the-art. Leading international experts discuss the applications, challenges, and future prospects of research in this increasingly vital field, providing a valuable resource for students and researchers working in this field. - Explores the fundamentals of sustainable materials for solar energy applications, with in-depth discussions of the most promising material solutions for solar energy technologies: photocatalysis, photovoltaic, hydrogen production, harvesting and storage - Discusses the environmental challenges to be overcome and importance of efficient materials utilization for clean energy - Looks at design materials processing and optimization of device fabrication via metrics such as power-to-weight ratio, effectiveness at EOL compared to BOL, and life-cycle analysis

Green Energy Materials Handbook gives a systematic review of the development of reliable, low-cost, and high-performance green energy materials, covering mainstream computational and experimental studies as well as comprehensive literature on green energy materials, computational methods, experimental fabrication and characterization techniques, and recent progress in the field. This work presents complete experimental measurements and computational results as well as potential applications. Among green technologies, electrochemical and energy storage technologies are considered as the most practicable, environmentally friendly, and workable to make full use of renewable energy sources. This text includes 11 chapters on the field, devoted to 4 important topical areas: computational material design, energy conversion, ion transport, and electrode materials. This handbook is aimed at engineers, researchers, and those who work in the fields of materials science, chemistry, and physics. The systematic studies proposed in this book can greatly promote the basic and applied sciences.

Until recently, much of the development of building materials has predominantly focused on producing cheaper, stronger and more durable construction materials. More recently attention has been given to the environmental issues in manufacturing, using, disposing and recycling of construction materials. Sustainability of construction materials brings together a wealth of recent research on the subject.The first part of the book gives a comprehensive and detailed analysis of the sustainability of the following building materials: aggregates; timber, wood and bamboo; vegetable fibres; masonry; cement, concrete and cement replacement materials; metals and alloys; glass; and engineered wood products. A final group of chapters cover the use of waste tyre rubber in civil engineering works, the durability of sustainable construction materials and nanotechnologies for sustainable construction.With its distinguished editor and international team of contributors, Sustainability of construction materials is a standard reference for anyone involved in the construction and civil engineering industries with an interest in the highly important topic of sustainability. - Provides a comprehensive and detailed analysis of the sustainability of a variety of construction materials ranging from wood and bamboo to cement and concrete - Assesses the durability of sustainable construction materials including the utilisation of waste tyre rubber and vegetable fibres - Collates a wealth of recent research including relevant case studies as well as an investigation into future trends

Smart Multifunctional Nano-inks: Fundamentals and Emerging Applications covers nano-inks and how they can be used in inkjet printers for printing complex circuitry on flexible substrates or as a paste for 3D printers. Microstructures can be 3D-printed using nano-inks in a combination of high-resolution plasma printing and subsequent rotogravure printing. In addition, smart multifunctional nano-inks are not only required for the electronic, but also in other applications, such as for secure inks, for currency, and in immigration documents. This book focuses on fundamental design concepts, promising applications, and future challenges of nano-inks in various areas, such as optoelectronics, energy, security and biomedical fields. The current challenge for the successful industrial application of nano-inks is in the preparation of a stable dispersion of advanced materials for nano-inks. The functionalization, synthesizing, and theoretical modeling provide the solution for most of the current issues, but there are still remaining challenges which are covered in this comprehensive resource. - Outlines the major nanomaterials used in the manufacture of smart nano-inks - Provides information on the major industrial applications of nano-inks - Assesses the major challenges of using nano-inks in a cost-effective way, and on an industrial scale